This kind of machine is suitable for grinding flat glass straight-line bottom line of different size and thickness(e.G. Straight-line pencil edge, og edge etc). Its speed can be adjusted by stepless regulator at random during processing. Rough grinding, fine grinding and polishing can be completed in one procession. Easy operation, high efficiency.
Technical specifications:
Hym6320
1. The number of grinders: 6
2. Grinding speed: 500 ~ 2500mm/min
3. Glass thickness: 3 ~ 20mm
4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm
5. Power: 16kw
6. Weight: 2600 kg
7. Size: 6400 x 1200 x 2500mm
Hym4320
1. The number of grinders: 4
2. Grinding speed: 500 ~ 2500mm/min
3. Glass thickness: 3 ~ 20mm
4. Size of processed glass: max: 3000 x 3000mm min: 100 x 100mm
5. Power: 11.3 kw
6. Weight: 2300 kg
7. Size: 5900 x 1200 x 2500mm
Glass-lined and stainless steel reactor with the capacity 50-30000l. Corrosion resistance stability: very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180. Resistance to impact: 220-10-3j. Thermal shock resistance: resistance to sudden cooling 110, resistance to sudden heating 120. Insulation performance: the enamel surface should be strictly tested at 20kv.
Functions characteristics:
Low-e insulating glass production line
Automatic control function for low-e glass
It is transmitted by a wheel, steadily and reliably
Automatic adjust function for pressing with hydraulic compression
Tilting table with hydraulic pressure
Monitor using system temperature/speed/production volume
Mechanical trouble cheek
Whole line control function with 1monitor .
Technique parameter:
Max .Glass size 1800*2500mm
Min .Glass size 300*500mm
Glass thickness 3-50mm
Thickness of washing glass up to 50mm
Max.In washing section 12m/min
Max.In accelerating 50m/min
Brush 3pair(low-e)
Power voltage 28kw(380v)/50-60hz
Size of line 15600*2350*3000mm
Power rate 20kw .
Functions characteristics :
Shape glass LOW-E insulating glass production line
Automatic control for LOW-E glass (2-brush treatment for LOW-E)
Automatic adjust function for pressing with hydraulic compression
Titling table with hydraulic pressure
Monitor using system temperature/speed/production volume
Mechanical trouble cheek
Whole line control function with 1 monitor .
Technique parameter :
Max. glass size 2500*3500mm
Min. glass size 300500mm
Glass thickness 3-50mm
Thickness of washing glass UP TO 60mm
Max.in washing section 12m/min
Max.in accelerating 50m/min
Brush 4pair(LOW-E)
Power voltage 3p 41.5kw(380V)/50-60Hz
Size of line 25000*2560*3380mm
Power rate 20.6KW .
Wood case
7000kg
22000*1560*3380mm.
158 Glass Machinery Suppliers
Short on time? Let Glass Machinery sellers contact you.
The 'db251d' glass straight-line beveling machine models have been designed and built to accurately grind and polish a bevel to the face of flat glass sheets and also smooth grind (pencil edge+) the remaining glass sheet edge. The beveling, polishing and edging functions are all be processed at one time.
The five grinding and smoothing spindles are accurately adjusted as a group allowing fast and accurate changes in required bevel width. The two felt polishing wheels are positioned by manual. The edging diamond wheel is adjusted manually. The whole machines bed is adjusted electrically for angle changes, via a robust gear drive system.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle: 3p-30
Max. Bevel width:30mm
Glass process thickness: 4mm-19mm
Process speed: 0.73-3.65m/min
Spindles: 8
Power·ª16.8kw
Overall dimension: 7700*1300*2520(mm)
Weight: 4050kgs
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface.
1.2 operation condition
1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2%
1.2.2 ambient temperature: 1íµ~40íµ
1.2.3 r.H: <90%
2. Technical data:
(1)Thickness range for glass to be processed: 3~25mm
(2) Beveling angle: 45íp
(3) Min. Size for glass to be processed: 300mm
Max. Size for glass to be processed: 4000mm
(4) Processing speed: 0.6~6m/min
(5) Installed power: 48.6kw
(6) Required area of the machine: 9000*7000*1900
Ds1d shape edging/beveling machine applies to grinding and polishing for shaping peripheral and beveling edges of circular, ellipse and irregular flat glass, and also applies to semi-automatic grinding for circular and elliptical glass. Using different shaping grinding wheels can obtain the half- round, flat or og edges of glass. The grinding and polishing for bevel edges can be done by the means of adjusting angles of the grinding spindle and using the bowl-shaped grinding wheel
Technical data.
Glass table drilling machine (two drilling head) is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping different drilling bits. The machine is good for batch processing. Working efficient is high.
Technical data:
Distance between drilling head and supporting column:1345mm
Hole diameter:í=4mm-200mm
Glass process thickness:3mm-19mm
Power:4kw
Dimention:2500*2200*1600mm
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises.
Operate and maintain.
Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute.
Glass thickness is selected through a toggle switch linked to a servomotor and a digital display
The arris wheels automatically adjust with each thickness selected.
Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass.
The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually.
The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual.
All motors are supplied according to clientÆs request, transformers are not used.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle:45¦
Glass process thickness:3mm-28mm
Process speed:1.0-5.0m/min
Spindles:9
Power18.5kw
Overall dimension:6900*1200*2520(mm)
Weight:2750kgs
Insulating glass machine, insulating glass machines, insulating glass machinery, insulating glass line, insulating glass equipment, insulating glass equipments
Shape glass low-e insulating glass production line
Automatic control for low-e glass (2-brush treatment for low-e)
Automatic adjust function for pressing with hydraulic compression
Titling table with hydraulic pressure
Monitor using system temperature/speed/production volume
Mechanical trouble cheek
Whole line control function with 1 monitor
Technique parameter
Max. Glass size 2500f¯3500mm
Min. Glass size 300f¯500mm
Glass thickness 3-50mm
Thickness of washing glass up to 60mm
Max.In washing section 12m/min
Max.In accelerating 50m/min
Brush 4pair(low-e)
Power voltage 3p 41.5kw(380v)/50-60hz
Size of line 25000f¯2560f¯3380mm
Power rate 20.6kw
Functions characteristics:
Low-e insulating glass production line
Automatic control function for low-e glass
It is transmitted by a wheel, steadily and reliably
Automatic adjust function for pressing with hydraulic compression
Tilting table with hydraulic pressure
Monitor using system temperature/speed/production volume
Mechanical trouble cheek
Whole line control function with 1monitor
Technique parameter:
Max .Glass size 1800íß2500mm
Min .Glass size 300íß500mm
Glass thickness 3-50mm
Thickness of washing glass up to 50mm
Max.In washing section 12m/min
Max.In accelerating 50m/min
Brush 3pair(low-e)
Power voltage 28kw(380v)/50-60hz
Size of line 15600íß2350íß3000mm
Power rate 20kw
5000kg
Functions characteristics:
The production line is composed of glass transporter, automatic glass scavenging dehydrator, glass inspection transporter, automatic aluminum frame locating machine, glass reversible transporter, binding machine butyl extruder machine, bicomponent rubber beating machine molecular sieve bottler, and rotaiy rubber-spreading machine. The production line is composed of flat press mode which is quite popular in the world production of hollow glass. The automatic flat press machine has a unique designation of two boxes to enable the two pieces of glass binding into on one time. It is also suitable for production hollow glass of different size, shaped hollow glass and glass curtain walls.
Technique parameter:
Max .Glass size 1600íß2000mm
Min .Glass size 300íß500mm
Glass thickness 3-25mm
Thickness of washing glass up to 50mm
Working speed 12m/min
Brush 2pair(low-e)
Power voltage 22kw(380v)/50-60hz
Size of line 12000 multiply1250 multiply2600mm
Power rate 11kw
Functions and characteristics:
This line is specially designed for producing the slot-alum insulating glass .It includes vertical washing drying machine roll-pressing machine and can accomplish the double glazingí»s washing drying auto-assembling, auto-roll-pressing and smooth shifting out. It features high efficiency, low power, and energy-saving, less space using and easy operation.
Technique parameter:
Max .Glass size 1600íß1800mm
Min .Glass size 300íß500mm
Thickness of washing glass up to 50mm
Working speed 2-10m/min
Power voltage 380vac
Size of line 11500íß1250íß2600mm
Power rate 11kw
Functions characteristics:
Plc man-machine interface display screen switches and pilot light are all imported.
Automatic starting, suspending and stopping.
Washing-conveying mechanism is upward.
Drying conveys by wheel.
Inspecting glass cleaness.
Washing-conveying starts together by the foot control and hand control.
Automatic glass and alum-frame locate, as well as the assembling.
Automatic implemention of the roll-pressing procedure.
Glass-rotation can be made automatically or by hand.
Auto-heating for the washing water according to the season changing.
Supervision by man-machine interface display screen.
Technique parameter:
Max .Glass size 1800íß2500mm
Min .Glass size 300íß500mm
Glass thickness 3-50mm
Thickness of washing glass up to 50mm
Working speed 12m/min
Brush 3pair(low-e)
Power voltage 28kw(380v)/50-60hz
Size of line 15000íß2350íß3000mm
Power rate 12.8kw
We provide two series of laminated machine. Lm-af-t is a tilting design and lm-af-c a chamber design.
Lm-af series
Characteristic
1. Laminated glass is made in this machine. No autoclave or roller press is required. The laminated glass made from this machine is finished product.
2. Vacuum rubber ring and vacuum rubber bag are not required. For details, please refer to the technical description of each model.
Type of glass to be made
This machine is used to make different type of laminated glass such as,
1. Laminated glass for decorative and architectural purposes.
2. Polymer dispersed liquid crystal (pdlc) panel which is transparent allowing light passing through when voltage applied and opaque when voltage shut off.
Eva interlayer film
The laminated glass made out of this machine requires no pvb. Instead, a special interlayer film eva is used to bind the glass. Not like pvb, eva film is easy to be handled such that it requires no control in temperature and humidity. Hence, no assembly room is needed and thus, air-conditioner and de-humidifier are not required. The laminated glass can be made from one piece of eva film such that excellent anti-penetration strength is obtained without any glass fragmentation in case the laminated glass is broken accidentally.
Glass Straight Line Edging Machine is suitable for grinding flat edge with arrises of different thickness and size glass. Equip with nine bowl or cup shape special purpose wheels, five for flat edge, and four for arrises. The grinding and polishing of flat edge with arrises are finished at one processing
