Glass table drilling machine (two drilling head) is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping different drilling bits. The machine is good for batch processing. Working efficient is high.
Technical data:
Distance between drilling head and supporting column:1345mm
Hole diameter:í=4mm-200mm
Glass process thickness:3mm-19mm
Power:4kw
Dimention:2500*2200*1600mm
The 'db251d' glass straight-line beveling machine models have been designed and built to accurately grind and polish a bevel to the face of flat glass sheets and also smooth grind (pencil edge+) the remaining glass sheet edge. The beveling, polishing and edging functions are all be processed at one time.
The five grinding and smoothing spindles are accurately adjusted as a group allowing fast and accurate changes in required bevel width. The two felt polishing wheels are positioned by manual. The edging diamond wheel is adjusted manually. The whole machines bed is adjusted electrically for angle changes, via a robust gear drive system.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle: 3p-30
Max. Bevel width:30mm
Glass process thickness: 4mm-19mm
Process speed: 0.73-3.65m/min
Spindles: 8
Power·ª16.8kw
Overall dimension: 7700*1300*2520(mm)
Weight: 4050kgs
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface.
1.2 operation condition
1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2%
1.2.2 ambient temperature: 1íµ~40íµ
1.2.3 r.H: <90%
2. Technical data:
(1)Thickness range for glass to be processed: 3~25mm
(2) Beveling angle: 45íp
(3) Min. Size for glass to be processed: 300mm
Max. Size for glass to be processed: 4000mm
(4) Processing speed: 0.6~6m/min
(5) Installed power: 48.6kw
(6) Required area of the machine: 9000*7000*1900
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises.
Operate and maintain.
Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute.
Glass thickness is selected through a toggle switch linked to a servomotor and a digital display
The arris wheels automatically adjust with each thickness selected.
Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass.
The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually.
The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual.
All motors are supplied according to clientÆs request, transformers are not used.
Technical data
Min. Process size:120mm*120mm
Max. Arris angle:45¦
Glass process thickness:3mm-28mm
Process speed:1.0-5.0m/min
Spindles:9
Power18.5kw
Overall dimension:6900*1200*2520(mm)
Weight:2750kgs
Ds1d shape edging/beveling machine applies to grinding and polishing for shaping peripheral and beveling edges of circular, ellipse and irregular flat glass, and also applies to semi-automatic grinding for circular and elliptical glass. Using different shaping grinding wheels can obtain the half- round, flat or og edges of glass. The grinding and polishing for bevel edges can be done by the means of adjusting angles of the grinding spindle and using the bowl-shaped grinding wheel
Technical data.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other.
Max size :3300*12000mm
Main character :
Energy saving , improving the thermal performance
Sound insulated
Security and comfort
Component :
1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application
2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material .
JH GLASS pattern glass is from 3mm-12mm , all is temperable quality , mainly used for glass table , cabinet, window,door ,indoor partition and curtain wall .
the main pattern including nashiji,mistlite,karatachi,moru,hitchcross,chinchilla,watercube,rain,bamboo ,etc.
JH acid etched glass is annealed glass treated with acid to give its surface a frosted look.Entire sheets of glass can be acid etched,or small sections can be treated to add specific designs. It make glass artistic ,beautiful and long lasting .Normal acid etched glass can be used to create doors,partitions,walls,shelves,and railings, special items can be used as �?�¢??anti-glare glass�?�¢?? for picture frame , screen ,etc.
Product items : single side acid etched glass / double side acid etched glass
JHG offers ideal glass to use protecting the surface of tables and desks with any shape or style. We use the best glass cutters, edger and CNC for all complex shapes, hole locations, and perfect edge work.
