Introduction :
Apply water-proof shaft and bearing in the drying section
Perfect low-e glass washing performance
Adopt interval working design for saving energy
Two pairs of brush
Power: 3p 380v/1p 220v 32kw 50hz
Technique parameter
Max glass size: 2440*3000mm (1800 * 2440mm)
Min glass size: 300 * 500mm
Washing speed: 0-8m/min
Glass thickness: 3-15mm.
9000*1800*3500mm
8000*1800*3000mm.
Voltage: 380v 3p 50hz Power: 12kw Washing speed:0-4m/min Min glass size: 100*200mm Max glass size: 1200*2500mm Glass thickness: 3-8mm Dimension: 2500*1600*900mm Dimension: 2500*1600*900mm Weight:800kg
Characteristics: 1. Loading section equipped with stainless steel water tank and spraying device. 2. Easy operation and maintenance: top frame supported by high strength screw can be elevated by 400mm as a whole for convenient cleaning and maintenance. 3. Drying section: blower packed with muffle cotton can largely minimize the noise. The air filter screen fixed across the entrance of blower can reduce dust during the drying process and is easy to remove for cleaning. Air blade can dry glass panel in a short time with high speed cold air without heating. Pressing roller is used for top oblique air blade to ensure smooth transmission of small glass panels. 4. Conveyor device: bevel gear is adopted for steady and synchronous transmission. 5. Water circulation system: water sprayed out to the brushes will return to the tank and be reused by circumfluence thus save water consumption. 6. Control system: all function buttons are separated and clearly marked on the control panel. Conveyor device uses transducer to adjust the transmission speed. Glass thickness and transmission speed will be showed on the digital display.
Stainless steel nois isolated closed (open) top washing cabin 4 or 6 units of balanced brush rollers in the washing unit revolving at high speed Adjustable glass transport speed High sensetive brushes that can wash coated glass Homogeneous brush contact fof different glass thicknesses Draying fan equipped with a heater placed in a noise-isolated housing Stainless steel water tank equipped with a heater Float-valve system for controlling the water level in the water tank Standard working direction from left to right Electrical system compliant with general safety rules.
Vertical glass washing machine information: Max glass processing width:2500mm/2200mm. Min glass processing size:450*450mm. Glass thickness:3-19mm. Working speed:1-7m/min. Power:380V/50HZ. Features: 1.Vertical glass washing machine is key equipment of manufacturing and processing insulating glass in architecture,building material and decoration.The machine can wash 3-12mm thickness flat glass. 2.The machine mainly consists of Washing Section,Drying Section,Drive System,Machine Frame,Tank,Blower,Electric Control System and other parts.During the whole process,the machine works automatically,and no need manual operation. 3.Washing and drying part can open for easy maintenance,max,opening 200mm. 4.Conveyor rollers are vulcanized and rectified,bbeing made with NBR(nitrile-butadiene rubber).Roller diameter is 80mm. 5.170mm flocking bristles brushes.Last soft brush is for Low-E and coat glass.Brush axes are in stainless stell.Water tanks are built with wheels for easy removal and cleaning and equipped with "fast plugs"so they can be easily drained without any disassembly.
Horizon glass washng machine information: Unit weight:1000kg. Glass thickness:2-19mm. Min glass size:250*250mm. Max processing glass with:1600mm. Max height:400mm. Features: Glass washing machine adopts horizontal structure for cleaning and drying on flat glass,with standard series,coated film series and LOW-E.Procedures:Loading seaction-cleaning seation(three grades washing)-Drying section(18KW air dryer)-off-loading section.it's a necessary machine on glass deep processing.
Skw-2500v is our standard size of vertical washing machine, it can be matched with glass insulating line. It combined function of three steps washing, used with stepless regulator driving system, which is easy to wash different size of glass. Washing area installed with stainless steel or other special treatment steel. Optional for hard and soft brusher device, which is special designed for hard low-e glass washing. Our machine can be design according to customer requirement. Sanken sincerely wishes to offer you the best quality vertical glass washing machine with the best economical price. And you are most welcome to china for visiting our factory 2)-specification of vertical glass washing machin 1. Processing glass thickness: 3-19mm 2. Min. Size of processing glass: 650x650mm 3. Max. Height of processing glass: 2500mm z 4. Power: 28kw 5. Weight: 2.5 tons 6. Occupation area: 8000x3000x3700mm
Technique parameter Voltage:380v electric power:26.75kw Work speed:2~7m/min Max size of glass processing:2000*2450mm Min size of glass processing:420*500mm Rinsing thickness:3~12mm Insulating glass thickness:¡Ü40mm Contour dimension:6800*3200*2150 1.Sx2500 glass washing machine is a special multifunctional washing machine for flat glass cleaning .It has favorable washing and air-dry effect.This is an ideal choice for the glass processing corporation. 2.Three stage toll type washing brushes, water circulation, heat air and etc.Multifunctional combinations are available for customers. 3.Feeding system adopts gear transmission which is more stable and reliable;cleaning system adopts electrical adjustment which is displayed by digital and easy operated 4.This machine is featured in reliable function, good washing effect and easy maintenance.It is not only suitable for general glass washing but also for the high requirement toughened glass washing and dryness. Min.Order quantity:1set/sets Supply ability:20set/sets per month Port:qingdao tianjin ningbo shanghai Payment terms:l/c, d/a, d/p, t/t, western union, moneygram Packaging details:wooden case or as customer require Delivery details:25 days after the payment
Cleanly washed glass cullet in size of 0.5 to 5mm
BQ2500 Glass horizontal washing & drying machine is working for various flat glass and specially working for LOW-E glass. The structure of machine is made of painted steel; All parts in contact with water are waterproof materials made. The machine equipped with 4 pair of brushes and air-knife so that generate a perfect washing and drying, All driven-rolls are steel made, suitably coated with vulcanized and rectified rubber, soundproof blower, is placed on the top of drying section, to ensure a strong force air for drying. The washing section is well controlled by PLC, and it is able to be completed lift up or low-down for the purpose of different thickness of glass. W26 horizontal washing machine is an particular design for Low-E glass and other coated glass, it is also can perfectly perform washing and drying for all kind of flat glass. Min. Size 300*350mm Max.Size (Width) 2600mm Glass Thickness 3-60mm Processing Speed 1.2-6m/min Intalled Power 39KW No. of Burshes 4pairs Dimension 8500*4500*3500mm Weight 4500kg