Ape(pentaerythritol triallyl ether, cas: 91648-24-7) is a clear colorless liquid. It, ¡¥s unsaturated alcohol with an average of one hydroxyl group and three double bonds. Which is the same model to daiso neoallyl p-30.
Package&storage : n.W.200kg/drum, must be sealed and protected from heat and air.
We are one of manufacturers and exporters raw lacca/ red sticklac , shellac, gum rosin, gum benzoin, bamboo stick, burdock root. We can supply big volume of this product.
Usage: it is used in the insulation material of pvc tube, panel, hard transparent
Sheet, foil, disc, pvc monofilament, blow molding product, appliance insulation
Material.
We have sg1-sg7 with different viscosity and k value.
This is two components pu foam resin which is used to apply as rigid cushion, insulation for pipe and air conditional system, frozen room panel, floating drum and marine floating system, fill in empty space area. It is rigid type pu foam. Easy to use.
* products features: 800g; solid content 25¡à2%¡«38¡à2%; nco content 4.5 ¡à0.5%¡«6.5 ¡à0.5%; colorless liquid; available time 10-14 hours; moderate reaction; initial bond strength and final bond strength is good; comprehensive performance is stable£»be suitable for cross-linking adhesives.
* applicable shoes: the shoes requiring high bond, like skin leather shoes, fashion shoes, leisure shoes and slippers.
* rc can be diluted with anhydrous and alcohol-free ethyl acetate, dichloropropane, trichloroethylene, acetone, methyl ethyl ketone and toluene, among other solvents. When added in relatively large proportions aliphatic hydrocarbons can cause turbidity; but can be re-dissolved by using esters proportions of the solvents mentioned above.
* attention:
1. The adhesive might be used up within 10-14 hours after the hardener is mixed with the adhesive. If cannot finished, the adhesive mixed with hardener be not allowed to put back un-mixed adhesive.
2. After opening the hardener should be sealed immediately.
* reacts readily with moisture; for best life it should be kept dry and stored at temperatures between 5 oc and 32oc
We would like to introduce polres polyester, one of the leading polyester resin producer from turkey.
Our company was established at gebze, kocaeli, geposb industrial area in 2003. Our proven quality ensures customer satisfaction and our competitive marketing policy is the very nature of our success in both local and international markets.
In our own facilities we produce
-general purpose polyester resins,
-grp type polyester resins,
-putty type polyester resins,
-marble adhesive type polyester resins,
-casting type resins,
-acrylic type resins,
-smc / bmc resins,
-button type resins,
-pipe type resins,
-gelcoats,
-pigment pastes, and more.
With our huge web of contacts with (www.Polrespolyester.Com.Tr) my products, we are here to supply all type of products demands with our broad style of basin collection and technology. Please be informed that all kinds of orders with different style and packaging are welcomed.
Our company is supplies its costumers different sizes of high quality products in european standards. Kindly do not hesitate to come with further enquiry and demand our specs, samples. Your own specs and packaging requests are also welcome.
We do business in eastern europe, middle , bulgaria, germany, poland , our aim is to meet the requirements of our customers in the most appropriate way and time. Besides our current products, we also accept all kinds of oem projects in accordance with customized request.
In case you are interested in our company and products portfolio, we would be happy to contact you and send any further information regarding the specifications and quotations of the products.
We hope that your kind reply will found a long-lasting business relationship with you as well.
(we look forward to hearing from you soon for a mutual beneficial cooperation with your esteemed company.)
Solubility: do not dissolve in water
Attribute: low odor, high water solubility, nonflammability, biodegradability, efficient neutralization
Property specification
Appearance clear, transparent, without mechanical
Density g/m 0.986
Refractive index (25) 1.476
Viscosity (25) mpa.S 7.5
Flash point 95
Tg 90-100
Surface tension mn/m 30
Boiling point 245
Color (gardner) 1
Impurities
Ester content % 98
Moisrure content % 0.1
Polymer content % no
(mehq)inhibitor content ppm 100
Applications:
It is widely used in household and industrial cleaning applications. It can be used as preservative in food processing and water treatment industries, ph control and chemical intermediates; it can also be applied as an important additive in many fields, such as metalworking, electro-plating, electropolishing, tanning, spinning, dye printing and so on.
Stability and storage:
It does not belong to flammable chemicals, but should be kept in a well-ventilated warehouse, avoid direct sunlight and heat isolation to prevent high temperature metamorphism from the poly.
Package: 220 kg plastic plating steel drum
Shelf life: 12 months
Pva is the basic degradable chemical materials which has huge domestic and international market potentials. The aqueous pva has good spinnability, film-forming property, bindablity and emulsibility. It is widely used in the field of chemical, textile, paper-making, leather-processing, building, etc.
Description:
Injection molding resin is a compostable plastic based on a blend of thermoplastic starch (TPS) and other renewable materials
It is light yellow particle of cylinder or oval
The finished products made from this grade of resin are qualified by a high level of mechanical strength, outstanding elongation properties and toughness
It also suitable for micro-organisms decompose easily, the natural anti-static, color performance, and excellent print performance
The molding products of MBM-CM meet the requirements of DIN-Certco/IBAW and BPI certification and comply with European standard EN13432, USA standard ASTM 6400
They are fully biodegraded into CO2 and H2O during composting in professionally managed composting facilities, no any harmful residues left
Product features:
Replacing non-renewable resources (oil and more): made of thermoplastic starch (TPS) and other renewable materials
It's abundant resources recycling, and can be able to save large amount of oil resources
Good processability: has good processability and can be easily processed on standard plastics processing equipment
It can be applied to all kinds of different injection molding products
Protecting the ecological environment: has not three wastes emissions during the productive process
Even if there are some wastes during process, they also can be decomposed into eco-friendly materials, complies with environmental protection requirements
The waste is compostable: fully biodegradable during composting in professionally managed composting facilities, no any harmful residues left
Standard export packing
15432 Plants Plant Extracts Suppliers
Short on time? Let Plants Plant Extracts sellers contact you.
