We are mfg of phenolic resin, novalac, resol, and as per partys specifications.
Lumps and powder in 25kg bag, and resol in 30 kgs in plastic carboy.
Industrial grade Packing : 25 kgs / bags
Various Grades of Phenolic Resins - Novolacs & Resoles, in Lumps, powder & Liquid form. - Solvent based Resins
There are the powder and liquid resin for bonded abrasives production to meet the demand of different domain. This series is adopted advanced production equipment and processing. With strict formula design, effective molecular weight and distributing control method, it makes the distributing of resin molecular reach an extremely ideal status. The powder resin is characterized in strong viscosity, mechanical strength, abrasion resistance, heat resistance and wet grinding stability. As the excellent wetter, the liquid resin has a good wetting function and well-distributed miscibility. It makes the liquid resin with good humidity by the special processing. There is no caking under the high humid environment and with high intensity and good grindability, which is the excellent product for grinding wheel.
Usage: this product is an effective viscosifier for natural rubber and synthetic rubber. Due to the high degree of alkyl branching, this product has greater compatibility with rubber.This product can especially increase the initial viscosity of rubber.Especially for radial tire, it can effectively solve the problem of adhesive and provide high forming quality.This product can be used to manufacture tire, transport belt, hose, wire and cable products.Recommend 2-5 servings.
Phenol-containing wastewater is a kind of water pollution resource with wide source, large quantity, high concentration and great environmental hazard.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Supplier: Phenol formaldehyde resins
It is a phenolic resin made from natural phenol. It mainly used in paint industry, insulating varnish, brake lining etc. etc. In steel barrels
WL-2201 Specification: Appearance: pale yellow to yellow flake Ash (%): 0.1 Softened point (): 80 / 95 Application: WL-2201 is a vulcanizing agent of natural rubber and various synthetic rubber (such as butylbenzene, chlorobutyl, butyronitrile and butyl), in particular to a rubber vulcanizing agent which is difficult to vulcanize due to the unsaturation. The invention is mainly used for manufacturing tires, joints, seals, transmission belts, food containers and the like, and can be directly added into the rubber material during mixing, and the vulcanizing agent has excellent high heat resistance, high pressure resistance and aging resistance. Package:25 kg kraft paper inner lined with plastic bag Storage: Flaked phenolic resin should be stored in dry, ventilated and cool places (below 20 ) to avoid direct sunlight and stay away from heat sources. The storage period is 6 months (below 20 â??). Note: this product can be customized according to customer requirements WL-2203 Specification: Appearance: yellow/ light brown sheet or particle softening point ():80-105 hydroxymethyl content (%):% 1.0 min acid value (mgkoh/ g):55-10 Loss on heating 1.0 max.ash (%):0.1max. Application:Wl-2203 is a tackifier for natural rubber and synthetic rubber (such as butylbenzene, butyl, butyronitrile, triethylacrylate). Can be used for producing tires, belts, hoses, food containers, gaskets and soles, and the like. The resin can reduce the Mooney viscosity of the sizing material, improve the self-adhesive property of the sizing material, improve the physical and mechanical properties of the sizing material and the thermal aging property, and has no adverse effect on the vulcanized rubber. Package:25 kg kraft paper inner lined with plastic bag Storage: phenolic resin should be stored in dry, ventilated and cool places (below 25 ) to avoid direct sunlight and stay away from heat sources. The storage period is 1year. Note: this product can be customized according to customer requirements Phenolic resin WL-2302 Appearance:dark brown flake or granular
