Ape(pentaerythritol triallyl ether, cas: 91648-24-7) is a clear colorless liquid. It, ¡¥s unsaturated alcohol with an average of one hydroxyl group and three double bonds. Which is the same model to daiso neoallyl p-30.
Package&storage : n.W.200kg/drum, must be sealed and protected from heat and air.
Tmpde£¨cas rn: 682-09-7£© is a compound of three kinds of allyl ether, full name is trimethylolpropane diallyl ether, including monoallyl ether, diallyl ether, triallyl ether. Because of such structure, tmpde becomes an excellent air drying agent, is widely used in the production of unsaturated polyester resin (upr), and modified acrylic resins (uv) mainly.
Pentaerythritol resin is composited by pentaerythritol ester with modified rosin or light color rosin, and becomes irregular transparent granular solid after vacuum treatment which is widely used as viscosifier in adhesives industry. This product has excellent heat-resistance, anti-aging, good stability, compatibility, solubility, surface resistance and good color retention. Production feature: 1. Light color, low smell, good thermal stability 2. Greatly improve the eva adhesive strength 3. Good oxidation resistance 4. Good solubility. It can melt in cyclohexane, toluene, xylene, petroleum ether, ester, acetone and other organic solvents 5. Good intermiscibility. It can be in the formation of a wide range of transparent system with nr, cr, eva and other polymer. Production application: 1. Hot melt adhesive: eva glue stick, book binding glue, wood glue. 2. Hot melt coating, hot melt adhesive, hot melt pressure sensitive adhesive, ester gum, phenolic resin varnish. 3.Health adhesive, structural adhesive, packaging glue, cigarette adhesive, sealant, adhesive, etc. Production parameter: Item specification Color Softening point/? Acid value, mg koh/g Introduction: Storage time C9520 0-0.5 95/100
Fsp series pentaerythritol ester is made by rosin or modified rosin through esterification, esters, stabilized and made of light color, low odor, strong stability of a series of tackifying resin. Itemfsp95fsp95afsp100fsp100afsp105fsp110fsp115fsp120 Color (gardner color 50% toluene solution)2-42-42-42-40-12-40-1.52-5 Softening point ?95-10095-10098-10399-106100-106100-106108-116108-116 Acid value (mgkoh/g)¤30¤30¤3030-40¤30¤30¤30¤30 Melt viscosity (150?) centipoise 600-1800600-18001000-25001000-25001500-30002000-50002500-60004000-16000 Ash content %¤0.10.10.10.10.10.10.10.1 Relative density (20?)0.031.061.061.061.061.061.061.061.06 Flash poin240240240240250250260260 Application: used in hot melt adhesive, pressure sensitive adhesive, film adhesive, plastic, such as adhesive glue stick, colloidal particles, such as sanitary napkin glue, adhesive, adhesive tape, glue, wood glue, etc.; can also be used for coating products. Product feature: light color, low odor, good heat tolerance, can improve adhesion of hot melt pressure sensitive adhesive, and can mix with a variety of polymers such as eva, eaa, nr, sbs, sis , soluble in toluene, xylene, ethyl acetate, acetone, petroleum ether, vegetable oils, and other organic solvents. Package: 25kg net in pe bag or paper bag Safety attention: waterproof, fireproof, away from flammable item and peroxides. Remarks: can produce according to customer?s specific requirement or method.
