Petroleum And Oil And Related Products Importers And Buyers Suppliers and Manufacturers

A by-product of the LDPE polymerization process is LDPE wax. At room temperature, it is a solid, sticky white color. LDPE Wax is a wax-like substance that has a reduced molecular weight, melting temperature, and melt viscosity. It can be used with microcrystalline wax to increase melt viscosity, solvent resistance, and heat stability.

ACT Microcrystalline wax is a consistency regulator and oil binder. It is a multicomponent blend consisting of predominantly saturated hydrocarbons. It has a significantly elevated content of iso and cyclo-alkanes. This is crucial for the microcrystalline structure, the ductility, smoothness, and the outstanding oil absorption capacity of the substances. ACT Microcrystalline wax improves stability, adds structure and hardness to lip balm sticks and other products in stick form used as beauty products, without being excessively crystalline. It is also used in creams, lotions, pharmaceutical, and cosmetic industries ACT 5555 being one of our core products ; we are huge exporters of this product & we ensure optimal quality in every order. ACT 5555 has a variety of applications is use for making Lip Care, Lipsticks, Decorative Cosmetics/ Beauty Products, Fango Applications/Hand Baths/ Thermal Therapy, um Base/Food Coatings/ Confectionery Dividing Agents, Pharmaceutical Jellies etc. All of our products are lab tested for assured quality and are improvised as required by industries. On the same line basis of ACT 5555, we have a similar product called as ACT 5552. It is Yellow in colour and has synonymous properties to ACT 5555

QUOTATION FOR AVIATION FUEL JET A1 QUANTITY: 1,000,000BBL and above DELIVERY TERMS: CIF, TTO, FOB TERMS AND CONDITION Delivery: CIF, FOB, TTO Origin: Kazakhstan Inspection: Quality and Quantity inspection will Be Conducted at the Loading Port by SGS or equivalent Payment Method: DLC MT 700/ 760 /SBLC MT700/760 / MT103, TT wire. Shipment Method: Via Pipeline, Tanker Vessel, Bulk, Truck, and Rail Way Delivery Port: Any Safe World Port of Buyer Choice.

Jet A-1 is a kerosine grade of fuel suitable for most turbine engined aircraft. It has a flash point minimum of 38 degrees C (100�°F) and a freeze point maximum of -47 degrees C.

Test Item Quality Index The Measured Quality Test Method Melting Point () 58~

1. Density 0.95 to 1.03 kg/L at 15C 2. Viscosity Varies depending on the specific grade, but typically ranges from 50 to 300 centistokes (cSt) at 50C. 3. Sulfur Content High sulfur: up to 3.5% by weight Low sulfur: under 1% by weight (for areas with stricter environmental regulations) 4. Flash Point Minimum 60C (140F) 5. Pour Point Generally between 15C and 30C (59F to 86F) 6. Water Content Typically less than 1% by volume 7. Ash Content Maximum 0.1% by weight 8. Calorific Value Typically between 39 and 42 MJ/kg (megajoules per kilogram) 9. Carbon Residue Generally less than 15% by weight

Property Specification Density @ 15 C 775 - 840 kg/m Flash Point Minimum 38C Freezing Point Maximum -47C Viscosity @ -20C Maximum 8.0 mm/s (cSt) Smoke Point Minimum 25 mm Aromatics Content Maximum 25% by volume Sulfur Content Maximum 300 mg/kg Hydrogen Content Minimum 13.4% by mass Total Acidity Maximum 0.015 mg KOH/g Electrical Conductivity 50 - 600 pS/m (if required) Lubricity (BOCLE) Minimum 0.85 mm Thermal Stability (JFTOT) Minimum 260�°C (Filter Pressure Differential: Maximum 25 mm Hg) Water Content Maximum 70 mg/kg

Appearance Clear and bright free from visible impurities Density 0775 0840 kgL at 15C Flash Point Minimum 38C Freezing Point Maximum 47C Viscosity Maximum 80 mms at 20C Sulfur Content Maximum 030 by mass Aromatics Maximum 25 by volume Net Heat of Combustion Minimum 428 MJkg Smoke Point Minimum 25 mm Copper Strip Corrosion Maximum 1 2 hours at 100C Thermal Stability Jet A1 must pass JFTOT test 260C Electrical Conductivity 50 to 600 pSm at the point of delivery

World Simplest Procedure: No Upfront Payment, POF FOR POP DEAL PRICE: USD 85/Barrel Gross. VTT- FOB ASWP TRANSACTION PROCEDURES: 1. Buyer provides ICPO incorporating seller�??s procedures, Buyer RWA + ATV for seller to perform due diligence and verify POF with Buyer's Bank. 2. Seller sends signed Commercial Invoice (CI) to Buyer and Buyer countersigns and sends CI back to seller within 48 hours. NCNDA+IMFPA is completed and signed off by all parties. 3. Products will be loaded onto a vessel at the seller's loading port and fresh SGS will be completed and provided to the buyer. 4. Seller will provide buyer with a copy of the Charter Party Agreement; therefore, the buyer can view the vessel as it is moving to the destination port. 5. The buyer has choice to either have the product discharged in any of the ports specified above based on product. 6. Upon arrival of the vessel tanker at the final discharge port, the buyer shall show updated POF, conduct the SGS/CIQ Inspection (optional at buyer's expense) and make the payment for the full shipment via TT Wire or MT103 TT (Wire Transfer). Buyer has the choice of paying in full through TT Wire or MT103 upon first SGS at loading port, or when the product starts discharging into buyer's tank or as soon as the discharge is completed into the buyer's tank. 7. Seller transfers ownership of the product to the buyer as per the buyer's instructions. 8. The seller pays all buyer and seller intermediaries the full commission amount as stated in the NCNDA/IMFPA agreement. Subsequently, monthly contract proceeds as outlined in the terms and conditions of the sales and purchase agreement between the buyer and the seller. VTO PROCEDURES- FOB ASWP PROCEDURES (VESSEL TAKE OVER): 1. Buyer provides ICPO incorporating seller's procedures, Buyer RWA + ATV for seller to perform due diligence and verify POF with Buyer's Bank. 2. Seller sends signed Commercial Invoice (CI) to Buyer and Buyer countersigns and sends CI back to seller within 48 hours. NCNDA+IMFPA is completed and signed off by all parties. 3. Products will be loaded onto a vessel at the seller's loading port and fresh SGS will be completed and provided to the buyer. 4. Seller will provide buyer with a copy of the Charter Party Agreement; therefore, the buyer can view the vessel as it is moving to the destination port. 5. Upon arrival of the vessel tanker at the final discharge port, the buyer shall show updated POF, conduct the SGS/CIQ Inspection (optional at buyer's expense) and make the payment for the full shipment via TT Wire or MT103 TT (Wire Transfer). 6. Seller transfers ownership of the product and buyer takes over the vessel. 7. The seller pays all buyer and seller intermediaries the full commission amount as stated in the NCNDA/IMFPA agreement. Subsequently, monthly contract proceeds as outlined in the terms and conditions of the sales and purchase agreement between the buyer and the seller.

PRODUCTS PRICES AND LIFT ABLE QUANTITIES (FOB) - VOPAK TERMINALS. AVIATION FUEL: JET -A1 LIFT ABLE QUANTITY FOB: Minimum Quantity: 500,000 Barrels per Month, Maximum Quantity: 2,000,000 Barrels Lift able. FOB Price: Gross USD $76.00 / Net USD $74.00, Per Barrels, FOB Rotterdam | Houston / Jurong & Fujairah Ports Commissions: $2, Seller side - $ 1.00 per Barrel / Buyer side - $ 1.00 per Barrel, Payable by Seller. FOB TRANSACTION PROCEDURE FOB VOPAK TERMINALS DIP & PAY 1. Buyer Sends CIS and ICPO of their purchasing product to Seller for verification and processing: 2. Seller submit buyer files to Vopak Terminal Manager. 3. Vopak Terminal Manager send Vopak Agreement to buyer through Seller. Buyer within 48 hours sign and return the Vopak Agreement through Seller. 4. Buyer finalizes the Vopak Terminal Protocols cost through the supplier with the Vopak Terminal Manager, and obtain the following and submit the same to Seller as listed below. o VopakBarcode o VopakRegistrationinformation. o VopakReferenceCode. 4b. Format of Authorization Form to accompany the information LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of Barcode code at Royal Vopak Rotterdam, with contract reference number: _____________. NB: Immediately buyer complete the above process and receive Vopak Reference through Vopak Terminal Manager, buyer will have access to communicate directly to Vopak Management with the help of the Reference code assigned to the buyer. 5. Seller, sends Cl for Buyer's endorsement. Buyer signs the CI and retune back within 24 hours of receiving alongside side with Sign Letter of Authorization. 6. Seller issue Buyer Full POP documents along with fresh SGS (Not less than 48 hours, one-time official confirmation mail from SGS official). Fresh SGS Report or Saybolt (Not later than 24 72 hours) Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. Injection Report Agreement Authorization to Sell Authorization to verify the product in the tank (ATV) Country Certificate of Origin Approved Dip Test Authorization (DTA Availability of Product, Commitment to Supply, 7. After verification of full POP by buyer, injection begins. 8. Upon completing the Injection, seller transfers title to buyer. 9. Buyer makes full payment after via MT103.

Crude Oil: Bonny Light REBCO ESPO (Siberia Pacific Oil) Basra Light WTI Southern Green Cayon Blend Olmeca Mexican crude Heavy Crude, etc. Product Description : Crude oil is a mixture of hydrocarbons that formed from plants and animals that lived millions of years ago. Crude oil is a fossil fuel, and it exists in liquid form in underground pools or reservoirs, in tiny spaces within sedimentary rocks, and near the surface in tar (or oil) sands Price of product ( USD price or FOB price) : Price on request Product origin : Worldwide Key Specifications/Special Features : Specifications for types/grades of crude (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.

We are supplier and exporter of Industrial Oil.

We have all kind of D2 and Bace Oil bulk quantities available. We have also bitomen with cheap price available stock. Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Product origin : Russia Key Specifications/Special Features : Grades : SN 150, SN 300, SN 500 Size and Packgaing details : Flexitank, IBC, Drums