The photosensitive sensor is currently the highest yield, the most widely used sensor, exist in the form of photosensitive resistance, along with the change of light intensity, the resistance value is also relatively change, resulting with the light intensity of the pulse signal. The structural elements of common cadmium sulphide photosensitive electrode are: electrode / cadmium sulfide / ceramic substrate / wire / resin moisture-proof film, etc.. Ceramic substrates have been widely used in photosensitive resistors. Product features: The ceramic circuit board has high accuracy and good electrical and thermal properties 2. Ceramic circuit board with high bonding strength and good weldability, can realize blind through hole 3. Ceramic circuit board technology is mature, environmental protection, pollution-free, cost is lower than traditional technology 4., a wide range of applications, single-sided and double-sided three-dimensional ceramic circuit boards can be produced 5. Customized production, without mold opening, short production cycle 6., no organic ingredients, resistant to cosmic radiation, high reliability in aviation and space, long service life. 7. Can carry out high-density assembly, line / pitch (l/s) resolution can reach 20 m, so as to realize the integration and miniaturization of equipment. 8. High frequency loss, it can be used in high frequency circuit. 9. Copper sealing, high reliability. 10. 3d substrate and 3d routing. 1. Ceramic circuit board appearance size is not limited 2., ceramic laser printing, three-dimensional routing 3. Ceramic circuit board without mask, fast response 4. Ceramic circuit board technology is mature, environmental protection, pollution-free
1.High infrared luminous intensity 2.High photoelectric conversion efficiency 3.Excellent heat dissipation 4.Low attenuation values Shenzhen xusheng semiconductor co., ltd. Founded in 2003, is a first high-tech enterprise whose business scope covers r&d, producing and selling epistar high-power ir-led. Our clients are widely distributed in multiple areas for industrial and commercial application. With leading technology and advanced manufacturing equipment, we offer customized light source and optical solutions for more and more high-end clients. Our company has been adhering to the â??more focus, more excellence as our core philosophy, and always put the technology as the first cause for the development. Through unremitting efforts, we has been built good relationships with several global well-know suppliers including epistar, carclo optics, denka and etc, which provided ongoing technical supports for our optoelectronic products and always keep the products leading the industry. In 2015, honglitronic made an investment in capital for us, which brought us new vitality. Hand in hand with each other, realizes altogether wins. We must move toward the world, climb global industrial chainâ??s upmarket. As along the way, we are always at the frontiers of led-technology. And always focus on r&d with a keen eye, as well ad insist on innovation and meticulous work style.
1.Quick turn around, prototypes, volumes 2. 1-36 layers 3. Rigid standard boards, flex- and rigid-flex design 4. Fr-4, cem1, teflon, halogenfree, arlon, metal base, high tg 5. Hdi technology 6. Blind and burried vias 7. Micro via 8. 4 mil structure 9. Surfaces: hal, immersion tin, -silver, -gold, hal leadfree, osp 10. Filled-up vias 11. Impedance controlled boards 12. Manual pcb assembling and smt mounting 13. Qfp, cob, bga etc. 14. Ul, iso, sgs, rohs
Prototyp pcb spezifikation Die beste lsung fr ihr produkt: das kann ein erst zeitaufwndiges, arbeitsintensives verfahren sein, bei dem ein hohes maã? an unsicherheit im ergebnis besteht. Die entwicklung eines pcb-prototyps bietet eine schnelle und kostengnstige mglichkeit, ihr design vom konzept bis zur produktion zu erhalten und gleichzeitig einige risiken zu minimieren, die mit einem standard-pcb-service verbunden sind. Prototyp pcb erfllt ihre qualittsstandards Fliegen bietet schnelle pcb-prototyping-dienstleistungen in einer guten qualitt und zu niedrigen kosten. Wir behalten uns voll und ganz an iso9001: 2008 qualittsmanagementsysteme, und wir haben eine interne qualittskontrolle, um zu berprfen, dass alle arbeiten unseren hohen standards entsprechen. Im vergleich zu standard-pcb-service, knnen wir prototypen sie ihre leiterplatte innerhalb von 3-7 tagen nach ihren individuellen anforderungen.
Standard pcb manufacturing service Standard pcb service refers to full features in printed circuit board manufacturing service. With 10+ years' experience in pcb fabrication, we have handled with hundreds of thousands of projects, and have covered almost all kinds of material including fr-4, aluminum, rogers, etc. This page only touches standard fr-4 based on pcb. For some detailed techniques, please refer to related webpage for information. Full feathers of pcb manufacturing service from flying unlike prototype pcb service, our standard pcb service has tighter production tolerances.It is recommended to use standard pcb service when your design is ready to be transformed from prototyoe phase to production phase.We are capable of manufacturing high quality pcbs up to 2000+ pcs with very competitive price.To endow your project with expected function and more possibilities, we offer advanced features for standard pcb services.
Among all MCPCBs(matal core pcb, known for its ability providing effective thermal dissipation for electronic products), Aluminum PCB, the most commom type and the basic material, consists of aluminum core with standard FR-4. Aluminum PCB features a thermal clad layer that dissipates heat in a highly efficient manner. Thus, it is of great help to cool components and increase the overall performance of the products. Currently, Aluminum Backed PCB tends to solve problems of high power and tight tolerance applications. Flying has been offering MCPCB manufacturing service for over ten years. Our full features about aluminum circuit boards own high capabilities and value-added options including Free DFM Check, allowing you to get high-quality aluminum PCBs done on budget. Aluminum PCBs printed by us are widely used for LED lighting,power equipment and automotive systems.
GESP technology (Dalian) Co.,Ltd. offers Printed Circuit Board manufacturing, providing consistent high quality and affordable price of Printed Circuit Boards. Utilizes cutting edge technology to ensure that all of our products are produced with absolute precision and built to our customers required specifications. We take great pride in offering the most up-to-date facilities and equipment guaranteeing that our products are built fast, efficiently and defect free.
Quick Details Place of Origin: Liaoning, China (Mainland) Brand Name: GESP Model Number: 2 Layer Pcb Base Material: FR-4 Copper Thickness: 0.25 Oz -12 Oz Board Thickness: 1.6mm-3.2mm 0.2mm-4.5mm Min. Hole Size: 0.15mm Min. Line Width: 5mil Min. Line Spacing: 4 mil Surface Finishing: HASL/enig/OSP/immersion silver /gold finger Base Material:: FR-4,CEM-3, Roger,teflon , taconic,arlon , Metal/ceramic/aluminum base Copper Thickness:: 0.25 oz -12 oz Board Thickness:: 0.005 Certificate:: ISO/UL/RoHS/TS16949 Gold thickness:: 0.05UM V-cut Scoring:: YES Standards:: IPC Class 2, Class 3 Max. Panel Size:: 22 Impedance Control: yes Surface Finishing:: HASL Lead Free/OSP/Soft Gold/Hard Gold
Quick Details Place of Origin: Liaoning, China (Mainland) Brand Name: GESP Model Number: 2 Layer Pcb Base Material: FR-4 Copper Thickness: 0.25 Oz -12 Oz Board Thickness: 1.6mm-3.2mm 0.2mm-4.5mm Min. Hole Size: 0.15mm Min. Line Width: 5mil Min. Line Spacing: 4 mil Surface Finishing: HASL/enig/OSP/immersion silver /gold finger Base Material:: FR-4,CEM-3, Roger,teflon , taconic,arlon , Metal/ceramic/aluminum base Copper Thickness:: 0.25 oz -12 oz Board Thickness:: 0.005 Certificate:: ISO/UL/RoHS/TS16949 Gold thickness:: 0.05UM V-cut Scoring:: YES Standards:: IPC Class 2, Class 3 Max. Panel Size:: 22 Impedance Control: yes Surface Finishing:: HASL Lead Free/OSP/Soft Gold/Hard Gold
Quick Details Place of Origin: Liaoning, China (Mainland) Brand Name: GESP Model Number: 2 Layer Pcb Base Material: FR-4 Copper Thickness: 0.25 Oz -12 Oz Board Thickness: 1.6mm-3.2mm 0.2mm-4.5mm Min. Hole Size: 0.15mm Min. Line Width: 5mil Min. Line Spacing: 4 mil Surface Finishing: HASL/enig/OSP/immersion silver /gold finger Base Material:: FR-4,CEM-3, Roger,teflon , taconic,arlon , Metal/ceramic/aluminum base Copper Thickness:: 0.25 oz -12 oz Board Thickness:: 0.005 Certificate:: ISO/UL/RoHS/TS16949 Gold thickness:: 0.05UM V-cut Scoring:: YES Standards:: IPC Class 2, Class 3 Max. Panel Size:: 22 Impedance Control: yes Surface Finishing:: HASL Lead Free/OSP/Soft Gold/Hard Gold
Quick Details Place of Origin: Liaoning, China (Mainland) Brand Name: GESP Model Number: 2 Layer Pcb Base Material: FR-4 Copper Thickness: 0.25 Oz -12 Oz Board Thickness: 1.6mm-3.2mm 0.2mm-4.5mm Min. Hole Size: 0.15mm Min. Line Width: 5mil Min. Line Spacing: 4 mil Surface Finishing: HASL/enig/OSP/immersion silver /gold finger Base Material:: FR-4,CEM-3, Roger,teflon , taconic,arlon , Metal/ceramic/aluminum base Copper Thickness:: 0.25 oz -12 oz Board Thickness:: 0.005 Certificate:: ISO/UL/RoHS/TS16949 Gold thickness:: 0.05UM V-cut Scoring:: YES Standards:: IPC Class 2, Class 3 Max. Panel Size:: 22 Impedance Control: yes Surface Finishing:: HASL Lead Free/OSP/Soft Gold/Hard Gold
We are the manufacturer with ISO standard certification in GuangDong China that specialize in producing all kinds of PCB(print Circuit Board) with reliable quality. All products are selled by Factory Price. The price is variable according to the complexity of your design. You can send your inquiry with required documents( such as Gerber File , Protel or DXP format File, Cadence format File, PADS format file). We will reviews your files and reply in a few hours with competitive price and valuable comments & suggestions. We also have PCB SMT Production Line and can provide SMT service. If you have similar requirements, please contact us.
XSSY Infrared LED 2835 Epistar 14mil Chip PCB Board for Security CCTV System with High Quality 1.High infrared luminous intensity 2.High photoelectric conversion efficiency 3.Excellent heat dissipation 4.Low attenuation values Model XS-60-18 Board Dimensions ¸ 52mm Plate Thickness 1.6 mm Color Black Board Material Double-sided glass fiber Plate Input Voltage DC12V-13V Input Current 255mA ±10% Single LED Current 85mA LED Spec. 2835 (14mil) LED Qty. 18pcs Connection Mode 6series * 3parallels IR Emission Angle 60 ° with 18pcs IR Wavelength 850nm Operating Temperature (-30 -60 ) Storage Temperature (-40 -80 ) Humidity 90%
Category:High TG PCB Number of Layers:6 Layers Material:IT180 Thickness:1.6mm±0.1mm Surface Treatment:ENIG 3u" Finished Copper:1oz Min.Line Width/Space:3/3mil Minimum Hole:0.15mm Hole Copper:25um Technical Features:Black Ink&Thick Gold&BGA Applications:Communication&Compute
Category:Standard PCB Number of Layers:1 Layer Material:FR4,Tg135 Thickness:1.6mm±0.1mm Surface Treatment:HASL lead free Finished Copper:1oz Applications:Electrical Toy Ship by DHL, FEDEX, UPS, TNT or client specified. Pay with popular and secure payment methods, such as PayPal, Telegraphic Transfer, etc. Our PCB products are mainly used in these fields: Power Electronics, Communications, Industrial Control, Medical Electronics, Security Electronics, Consumer Electronics, Computer, Automotive Electronics, etc.
Double-layer/Multi-layer PCBs, ceramic/aluminum substrate PCBs, as well as flexible FPCBs. We offer PCBs from single side PCB up to 12 Layers
Layer: 1~22 layers Materials: FR-4, CEM-3, Teflon, Aluminum, Rogers, High Tg Surface finished:Lead Free HASL,Immersion Gold/Tin/Silver, OSP, Gold Finger Plating, Selective Immersion Gold,Gold Plating Max.Panel Size: 550 * 650mm Min. Finished Holes Size: 0.10mm Microvias diameter: 0.10 - 0.15mm Min. Line Width/Spacing: 0.075 / 0.075mm Copper Feature to Holes(Outer): ±0.075mm Min. Plated Drills to Copper(inner): 0.25mm Min. Copper to Edge distance: 0.25mm Max. Copper Thickness: 140m Max. Board Thickness: 4.80 mm Min. Board Thickness: 0.20mm Min. Core Thickness: 0.10mm Min. Soldermask Dam: 0.10mm
Layer:1~22 layers Materials: FR-4, CEM-3, Teflon, Aluminum, Rogers, High Tg Surface finished:Lead Free HASL,Immersion Gold/Tin/Silver, OSP, Gold Finger Plating, Selective Immersion Gold,Gold Plating Max.Panel Size: 550 * 650mm Min. Finished Holes Size: 0.10mm Microvias diameter: 0.10 - 0.15mm Min. Line Width/Spacing: 0.075 / 0.075mm Copper Feature to Holes(Outer): ±0.075mm Min. Plated Drills to Copper (inner): 0.25mm Min. Copper to Edge distance: 0.25mm Max. Copper Thickness: 140μm Max. Board Thickness: 4.80 mm Min Board Thickness: 0.20mm Min. Core Thickness: 0.10mm Min. Soldermask Dam: 0.10mm
Rigid-flex circuits are a hybrid construction flex circuit consisting of rigid and flexible substrates which are laminated together into a single structure.The layers of a rigid flex are also normally electrically interconnected by means of plated through holes. Rigid-flex boards are normally multilayer structures.
Elecrow provides high quality assembly service. We can solder the most common used package such as 0201/0402/0603/QFP/QFN/BGA/THT. We do not have any minimum quantity limitations. You can make the very first 1 pcs prototyping PCBA, or make thousands for your mass production. As the customer requirements, we can solder the PCBA with hand or with reflow oven. For quantity>50 pcs, we will use the pick-and-place machine to place the components. Besides, lead free soldering available for the ROHS compatible. Part mapping file maybe needed for the components placement with pick-and-place machine. As the cost, the soldering cost will depend on the quantity of Pads, 0.03$ for SMD Pads(with stencil) and 0.04$ for THT pads, with discounts based on the quantity; for prototyping round less than 20 pcs, 5$ will be added for each design.
