In a city average consumption of traffic lights accounts for about 10% of the total public lighting. The possibilities for energy and cost savings in this field can therefore be very interesting. The main advantages of LEDs compared to incandescent lamps are: â?¢ Lower consumption (up to 93% less); â?¢ Longest average over 20 times more); â?¢ Strong reduction in maintenance (longer duration, the absence of parabola); â?¢ Improved safety (better visibility in critical condition and reliability of the lamp). Product Made in ITALY
Ideal for creating general parking signs and signaling danger zones. To make visible the terms of reference such as siting, excavation, demarcation of maintenance works. It is resistant to weathering and chemicals. It can be used on numerous surfaces such as cement, asphalt, glass, wood, synthetic materials. Lines of high precision can be made with this product. The width of the line can vary from 4 to 6 inches depending on the setting. The length varies depending on the traveling speed and the porosity of the surface: 40-50 m.
The Flood Led Light use the LED technology with very high luminous efficiency to generate the luminous flux most performing on the market. The strengths of these projectors are more brightness and brilliance with lower consumption, seven models available for all needs, powers up to 600watt (unique on the market) and three types optics . DRACO projectors are ideal for skilful lighting architectures and areas to achieve maximum performance with high aesthetic quality.Reference standards: EN 60598-1, EN62471, EN55015, EN61547, EN61000-3-2, EN61000-3-3.Guidelines: 2011/65/CE, 2006/95/CE, 204/108/CE.RoHS - IK08 â?? CE - IP66 - RGO . Example : 600W led replace 2000W JM , 270w LED REPLACE 1000w JM
Solar street lights to be fit easly in every place, also without the electricity facility. CE certified. For any information please don't hesitate to contact us.
Indoor lighting products.
Thickness 1, 5 until 2, 0 mm 90% bovine calf - 10% goat Colours : 20% black - 50% brown - 20% bordeax and other dark colours - 10% light colours quantity this stock . Kgs. 11, 252 net price euro 5, 70 kg. Ew work
Furniture scraps Anelina big size selected From sofa factory Origin material : germany Only one factory Size : three hands up Thickness : 50% mm. 0,9-1,2 50% mm. 1,3-1,5. Colours : 70% dark (brown and black) 30% light (mainly white).
All grain (full grain and correct grain) Size : 40/50 sf. Average 42/45 sf. Thickness : 50% mm. 0,9-1,1 50% mm. 1,3-1,5. Colours : 60% dark family - 40% light family. Quantity minimum each colour : 3000 sf.
There are many variations passages of available but theses in majority have suffered alteration in some form injecte humou or randomised words which don't looks even slightly believable embarrassing hidden in the middle.
The bench hand-operated rolling head fits for rolling the multi R-, A1 - and tinfoil capsules with a maximum length of 60 mm; ready for the installation of the capsule-prepolishing piece of equipment for 0,5 litre to 2 litre bottles having a height from 180 mm. Min to 360 mm. max * Made in stainless steel * Rolling spindle made in bronze with adjustable pressure rolling. * Pre-polishing equipment * Voltage 220/380 V. Hz.50 - Kw.0,18 * Weight Kg.28 * Speed 1400 rpm (2800 rpm on demand) * Dimensions mm. 300 x 400 x 1000 h.
Machinery
Industrial soap machine
Multisystem machine Bench Saw, Multisystem Model: edge polishin, profiling, cutting and chamfering machine for working marble and granite slabs. 2 speed main motor for marble and granite. Motorized, adjustable speed on 2 axes (X-Z). Hydraulic roller table. Water tank with buit-in recycling pump.
Mobile bridge saw Motorized main motor motion with adjustable speed on three axes (X-Y-Z). CNC control unit. Diamond Blades up to 500 mm. Motorized main motor rotation. Hydraulic roller table. Hydraulic slab loader. Laser cuttin guide.
ôAir-Basicö (system covered by worldwide patent ITMI20010049) is the latest model to be patented to produce Air-Bubble Film. It is outcome of twenty years of experience and the result of accurate research about all the production process aspects and the most advanced technology. It assures the maximum flexibility ( it is possible to stop the production with the films that remain inserted into the machine ) and minimum energy consumption at an economical retail price but with the utmost reliability. All the Torninova models have the same qualities of solving the many problems of marketing air bubble film such as the high cost of transportation, storage and energy consumption. Furthermore since Air Basic in completely versatile and automatic, only one operator is required to produce any type of multilayered air bubble film thought different materials and bubble size, changing production within few minutes and without scratches. ItÆs just this unique possibility to allow, with a limited investment, both producers and major consumers, to place the system in the specific consumer area, producing the more required air bubble films without transportation charge costs. The Air Basic system is completely automatic, controlled by Plc with touch screen display to program the meters for each roll, the distance between precuttings, the temperatures, the different speed of the nip rolls. Contact us
Mac bubble is the result of many years of torninovaÆs experience in the air-bubble film packaging systems. It is a step ahead in the survey of air bubble film systems, meeting the needs of the most important producers: a high levels production, a completely automatic functioning and a more flexible use allow it to answers to the demand of the growing market. The accurate design and the over dimensioning in his components mixed with the possibilities of the new plc generation, made the system completely reliable to work continuously for 24 hours a day. The accessories developed thanks to the collaboration with our customers can also be used subsequently cause the system is fully modular and arranged for the application of accessories. That gives to the system the right means to satisfy the market requires. The installation of pre-cutting unit controlled by plc, the fast interchangeability of forming cylinders in order to obtain a different bubble sizes, the 3rd and 4th layers producing modules, the possibility of ink-jet printing, the special rewinders according to the needs, the remote control unit to check the system function to distance, are a sample of the technical solutions to assure best systems. Mac bubble systems are made according to the european community rules and for the high components quality they no required additional maintenance. From the first one (made in 1986) they are all in working all around the world. Contact us
"coreless rewinder rp" is a completely automatic rewinder (roll to roll) that allows to rewind air bubble film for packaging in small rolls without internal core ( pony roll ) This rewinder born following the request of our customers to enter in the markets of hardware store, shopping mall, bricolage shop, etc., where the air bubble film cannot be sold in rolls with standard dimensions, but only in small rolls with few meters. This rewinder remove also the problem of the internal core cost that could be to much expensive if compared to the sold material. The plant is composed by different groups: Unwinder group complete with bearing brackets for the air expansion shaft with pneumatic closing system where the mother roll with an internal core (° 76mm) is loaded Central group complete with motorized nip-roll cylinder and pneumatic cut system with blade; Rewinder group where the material is rewinded without internal core thanks to rewinding rollers, unhooked and the present length and positioned on a basket. The plant also allows, through the application of an adhesive label or tape, to close the produced roll. Control panel where it is possible to set each parameters of production like number of rolls to produce and length. Once inserted the roll of departure, the "coreless rewinder rp" proceeds to the production of the rolls without internal core without any intervention of the operator which is only necessary to load a new mother roll and to remove the produced roll from the basket. The plant is conforming to the ce safety directives and it is furnished complete of manuals of operation and maintenance. Contact us
Lam machine, thanks to its flexibility, is a system that allows to: - laminate on the total surface two or more rolls of plastic materials as air bubble film of two or three layers, ldpe or hdpe films and foam. - to effect a joining through longitudinal sealing rollers of 20-40mm of two rolls of air bubble film with aluminium on a side. The coupling can also foresee an inside material of expanded foam or other materials. The lam plant results therefore very suitable for the production of laminated materials and for those people who intend to produce complex materials for insulation market
The perforating unit is totally an independent group that allows to pre-cut different types of material as film air bubble film, plain pe films, foam, paper to desired intervals. The plant results ideal to put in line with other system as extruders, air bubble film machinery, flexography printing machine. The group, built in steel with auto-level supports, it is composed from a rubber cylinder with neutral movement for the control of the speed of the material, group of pre-cut endowed with brushless motor and cylinder with toothed blades, cylinder of compression brushed and motorization for regulation from keyboard (minimum interval of pre-cut 200mm). The cover protection and the electric plant are conforming to the safety norms ce. The plant can be completed with the trimming group. Contact us
The demand to offer different productive solutions to its own customers, has allowed Torninova to apply its own technicall ability and experience in the production of air bubble film, in the production of machinery with in-line processing equipped with cast extruders (mono). The plant Power Bubble put together all the modern technologies and stand out for the following characteristics: Extruders with a.c. motor mounted in axis and controlled by inverter with nitrided steel barrier screws realized to plasticize and homogenize the material to extrude in different diameters according the request production capacity. Flat die with double delivery or separated flat dies for a good control and adjustments of the produced films, realized in steel with adjustable deliveries. Infrared Barrel Heating power saving up to 20%, long heater element life and quicker cooling response times Forming unit climbed on guide and rack arms that allow the automatized movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials deliver for the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature Produced air bubble film width from 1.000mm to 2.500mm (or more on request) The plant can be equipped (also in a second time thanks to its modularity) with various accessories: Forming cylinders with bubbles in different sizes Perforating unit equipped with brushless motor. Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Gravimetric blending and metering for up to 4 ingredients for a more accurate and automated management of the granules to be extruded Ink-jet printing unit to personalize the material with logos and symbols
