The demand to offer different productive solutions to its own customers, has allowed Torninova to apply its own technicall ability and experience in the production of air bubble film, in the production of machinery with in-line processing equipped with cast extruders (mono).
The plant Power Bubble put together all the modern technologies and stand out for the following characteristics:
Extruders with a.c. motor mounted in axis and controlled by inverter with nitrided steel barrier screws realized to plasticize and homogenize the material to extrude in different diameters according the request production capacity.
Flat die with double delivery or separated flat dies for a good control and adjustments of the produced films, realized in steel with adjustable deliveries.
Infrared Barrel Heating power saving up to 20%, long heater element life and quicker cooling response times
Forming unit climbed on guide and rack arms that allow the automatized movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials deliver for the flat dies and for its fast interchangeability.
Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant.
The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature
Produced air bubble film width from 1.000mm to 2.500mm (or more on request)
The plant can be equipped (also in a second time thanks to its modularity) with various accessories:
Forming cylinders with bubbles in different sizes
Perforating unit equipped with brushless motor.
Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films
Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing
Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder
Gravimetric blending and metering for up to 4 ingredients for a more accurate and automated management of the granules to be extruded
Ink-jet printing unit to personalize the material with logos and symbols
Supplier: Stp, etp, wtp, fine bubble tubular diffuser, fine bubble disc type diffuser, coarse bubble diffuser, mbbr media, tube settler, filter press machine, float switch, rota meter, pall rings, strainers, pressure gauge, drainage cell, e dosing pump, frp vessels, filter media, activated carbon, coconut shell carbon, activated carbon powder, pebbles and gravels etc.
Selling stage effect, confetti machine, bubble machine, larger snow machine, co2jet, smoke machine.And so on Technical parameter: Power :120w voltage:220v/50hz Height of flame:1-3m Weight:12kgíííísize:37*30*56cm (l*w*h)
Model No. LK1522ZH Frequency 15KHz Output power 2200W/2800W/3200W Power supply 220V/110V 50Hz/10A/1P Operation mode Time welding mode Electric current 10A Max Mold(Horn) Titanium or Magnesium alloy Welding area 50-250 mm Size(MM) 650L*390W*1400H Welding time 0.1-3 Seconds Max. force 3000N Display Digital dispaly Weight 100 KG Warranty One year 1)Seaworthy pack: Bubble pack+stretch films+wood frame with marks of product information 2)Packing method can be also changed according to the clients' special requirement.
1.Fast speed: The working period of both ordinary work-piece and highlight work-piece is less than 2 minutes after it enters the main machine, which is 2-4 times of the efficiency of common positive and negative pressure membrane pressure equipment. 2.Good effect: The product processed by common film has clear groove, no open side, bubbling, no color difference, and high light working surface has strong adhesion, and the effect reaches the international leading level. 3.Low energy consumption: The total power of the machine is 35KW, which is one half of that of the peer equipment;The main heating starting power is 21KW, and the average power consumption is 12KW/h. 4.High configuration: The key part of the machine adopts original parts from Germany, Japan and Taiwan, which is high configuration and stable performance. 5.High working efficiency: The whole machine adopts automatic top block. Compared with other domestic manufacturers, it saves the technological process of making the pad, saves the cost of process raw materials. The technology can be applied to different manufacturers and different positive and negative pressure devices, which saves the cost of replacing equipment. saves the scanning sequence of the pad of the equipment, saves the time of laminating process, greatly improves the working efficiency and reduces the labor cost.
Shenyang Zhanhongtu Machinery & Equipment Co.,Ltd We can change the standard positive and negative pressure to the workbench with PIN system. We are here, Shenyang, China's heavy industry city. We are waiting for you here. 1.Fast speed: The working period of both ordinary work-piece and highlight work-piece is less than 2 minutes after it enters the main machine, which is 2-4 times of the efficiency of common positive and negative pressure membrane pressure equipment. 2.Good effect: The product processed by common film has clear groove, no open side, bubbling, no color difference, and high light working surface has strong adhesion, and the effect reaches the international leading level. 3.Low energy consumption: The total power of the machine is 35KW, which is one half of that of the peer equipment;The main heating starting power is 21KW, and the average power consumption is 12KW/h. 4.High configuration: The key part of the machine adopts original parts from Germany, Japan and Taiwan, which is high configuration and stable performance. 5.High working efficiency:
china coal 0001 Introduction Of XTZNY-Intelligent Vacuum Circulation Press Slurry Machine 1, using servo control system, touch screen operation, imported PLC control. 2. Continuous grouting, no bubbles and stable pressure during grouting. 3, low-speed mixer can ensure the uniformity and fluidity of the slurry, 500L capacity can ensure the continuity of the grouting process. 4. Accurately control the ratio of water to glue, and the unqualified slurry will not enter the pulp tank and effectively control the performance of the slurry. 5, real-time monitoring of the flow to ensure that the pipeline is smooth. Parameter Of XTZNY-Intelligent Vacuum Circulation Press Slurry Machine Low Speed Stirring 450L High Speed Stirring 250L Low Speed Motor Speed 40r/min High Speed Motor Speed 1450r/min Low-Speed Click Power 2.2kw Pressure Rate 451/min Pressurized Click Power 4kw High Speed Motor Power 5.5kw
The features of Intelligence Machine Intelligence machine series is researched and developed by Lingke company , promptly become the hot sales machine type. Suitable for the Nonwoven,Plastic file,Recycle Bags,Kids toy, Daily use products,Electronics Industry,Auto spare parts and other plastic products welding 15K /20k Split ultrasonic plastic welding machine PLC) type LK2022ZH/LK1522ZH Frequency 15KHz/20KHz Output power 1500W/2000W/2600W 2200W/2600W/3200W Power supply 220V/110V 50Hz/10A/1P Operation mode Time welding mode Operation switch Two-hand stard with EMERGECY STOP at front Drive type 63mm Size(MM) Main machine650*390*1400 Generator560*420*160 Weight 100kg 1)Seaworthy pack: Bubble pack+stretch films+wood frame with marks of product information 2)Packing method can be also changed according to the clients' special requirement
TM2580F Positive and Negative Press Machine Features 1. Fast speed: the working period of ordinary workpiece is less than 2 minutes after it enters the main machine, which is 2-4 times of the efficiency of common positive and negative pressure membrane pressure equipment. 2. Good effect: the product processed by common film has clear groove, no open side, bubbling, no color difference, and high light working surface has strong adhesion, and the effect reaches the international leading level. 3. Low energy consumption: the total power of the machine is 28KW, which is one half of that of the peer equipment; The main heating starting power is 18KW, and the average power consumption is 10KW/h. 4. High configuration: the key part of the machine adopts original parts from Germany, Japan and Taiwan, which is high configuration and stable performance. The equipment uses imported solid core diameter 180mm cylinder to prevent oil leakage. The frame is made of manganese steel plate and sandblasted to enhance corrosion resistance and load bearing. The lifting balance system is easy to adjust, and the rise and fall are more stable. Hydraulic system oil port improvement and maintenance is more convenient. The aluminum frame is processed by one body, and no weld seam increases the strength. Outline size 11200mm*2480mm*2150mm Worktable size 2560mm*1270mm Weight 14T Total power 28KW Actual power consumption about 10KW Maximum processing size 50mm Voltage 380v 50HZ optional Rated operating pressure positive â?¤0.6Mpa negative â?¥-0.095Mpa Pls contact me Cindy Lee Shenyang Zhanhongtu Machinery & Equipment Co.,Ltd WhatsApp:+8615840529588 Wechat:15840529588
Feature : This line of machine has widely apply in many field, such as Car decoration, package industry, stationery, Building decoration and food packing field. Because it's light and the foaming pore is very even, bright, texture clear and low costs. 1.Special Extrusion Screw design: To ensure excellent mixing and dispersion performance. Effectively improve spot and color difference problems. 2.Vacuum Dry System: Provide both efficient removal of moisture,gas wasted and stable material output. 3.PID Temperature Control System: Combined with the forced cooling system to provide maximum stability and accuracy of temperature control. 4.DC Device: Provides stable driving performance,low noise,low power consumption and maximum power output. This machine can also be a multifunctional, producing common Sheet: AB C, ABA, AB and single, Cost-effective, Advanced machine design, Configuration optimization and reasonable, High automation. Item Description Materials PP Capacity 100-250 kg/h Screw Diameter (mm) |Õ90/|Õ55; |Õ120/|Õ65; |Õ150/|Õ85 Ratio of Screw (L/D) 1:30 Output product width 800-1600mm Output product thickness 0.6-5.0mm Leading speed 1-25m/min Main motor power (KW) 45/7.5; 110/45; 160/45 Co- motor Power (KW) 10-15 Heating Power (KW) 100-200. Wooden case line with bubble bag or as your required.
