The perforating unit is totally an independent group that allows to pre-cut different types of material as film air bubble film, plain pe films, foam, paper to desired intervals. The plant results ideal to put in line with other system as extruders, air bubble film machinery, flexography printing machine. The group, built in steel with auto-level supports, it is composed from a rubber cylinder with neutral movement for the control of the speed of the material, group of pre-cut endowed with brushless motor and cylinder with toothed blades, cylinder of compression brushed and motorization for regulation from keyboard (minimum interval of pre-cut 200mm). The cover protection and the electric plant are conforming to the safety norms ce. The plant can be completed with the trimming group. Contact us
Wide range pvc trunking Size 60x45 - 80x60 - 110x70 mm.
Flexographic machine Flexoline is the last generation lombardi flexo press. Flexoline's printing unit is our bigger technical success: it is a masterpiece of precision and simplicity of use. In fact printing unit's project was developed inspiring to hyper systems technical concept. A system is said to be a hyper system if its features optimize a specified technical parameter. More in detail flexoline's printing unit exhibits: Hyper-fit-system: an innovative system is used for print rolls allowing for immediate fitting of cylinders of different diameter with no need for an adapter. In fact print rolls lay on a special algorithmical-studied curve that ables to keep constant the printing pressure varying the roll diameter. (it minimizes the fitting time). Hyper-fix-system: the plate cylinder is pneumatically clamped with a conical piston that grants irreversibility of motion and reduces motions and vibrations to a minimum. (it optimizes stability). Hyper-clean-system: when the machine stops, the ink roller (anilox) is first removed, followed (after a settable time) by the print cylinder, in order to clean ink in excess (an essential operation when using non-uv inks).(it minimizes cleaning time). If you are interested please contact us.
The demand to offer different productive solutions to its own customers, has allowed Torninova to apply its own technicall ability and experience in the production of air bubble film, in the production of machinery with in-line processing equipped with cast extruders (mono). The plant Power Bubble put together all the modern technologies and stand out for the following characteristics: Extruders with a.c. motor mounted in axis and controlled by inverter with nitrided steel barrier screws realized to plasticize and homogenize the material to extrude in different diameters according the request production capacity. Flat die with double delivery or separated flat dies for a good control and adjustments of the produced films, realized in steel with adjustable deliveries. Infrared Barrel Heating power saving up to 20%, long heater element life and quicker cooling response times Forming unit climbed on guide and rack arms that allow the automatized movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials deliver for the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature Produced air bubble film width from 1.000mm to 2.500mm (or more on request) The plant can be equipped (also in a second time thanks to its modularity) with various accessories: Forming cylinders with bubbles in different sizes Perforating unit equipped with brushless motor. Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Gravimetric blending and metering for up to 4 ingredients for a more accurate and automated management of the granules to be extruded Ink-jet printing unit to personalize the material with logos and symbols
The polyboll machine is customizable with different options as moulder cylinders with different bubbles size, third and fourth layer unit, automatic loader for pellets, etc.
The twin bubble machine allow to produce in-line (without further steps) an air bubble film for insulation applications composed of: two layer of air bubble film laminated with coated aluminium foil on the external side. The machine can produce, of course, air bubble film in 2 or 3 layers for the packaging market. The twin bubble system has the following characteristics: Two extruder for the production, at the same time, of the two layers of air bubble film and one, placed in the middle, for their lamination. Two interchangeable forming cylinders Rewinder with automatic cycle that allow to produce rolls from 25 up to 150 mt and more. Possibility to add two additional lamination unit by hot air in order to laminate a layer of foam in the centre of the material (between the two layers of air bubble film). Recommend for the air bubble film production for insulation market
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are: Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods. Better protection with thinner plastic film: it means better performance with less raw material consumption. Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times. Recyclable : the co-extruded bubble film could be recycled with other polyethylene material An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process. Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure. You can easily understand the co-extrusion process through the following layout: The COEX BUBBLE plant has got the following features: Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure. Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron. Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded. Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature. Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request) The plant can be equipped (also after installation, thanks to its modularity) with several accessories: Moulder cylinder with bubble in different diameters Perforation unit with brushless motor Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue. The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
Olive oil machines
Chromed brass traditional cleat, dimensions: cm. 160 X 50 X 58H
Brass square deck hatch, dimensions: cm. 50 x 50
Polished brass oval bulkhead lamp, E27, 75W, CE approved
CiPiTENE - Recycled High Density Polyethylene granule qualified for blow-moulding, extrusion and thermoforming. Suitable for single layer bottles, watering pots, profiles, no pressure pipes, nets, sheets, plastic kerbstones and so on.
CiPiTENE is qualified for hollow bodies blow-moulding, for extrusion and thermoforming. CiPiTENE M.F.I. 0,2-0,3 g/10' 190ªC/2,16 Kg. CiPiTENE colour is light green only, but it can be easily coloured on darker colours with standard masterbatches. CiPiTENE is impurity free because it is filtered with 100 microns sieves. CiPiTENE smells slightly of detergent. packing on 25 Kg plastic bags (lot 27 t), on 1.020 Kg octabins (lot 22,44 t), on 1.250 big bags (lot 27,5 t) or upon request in bulk with silo (lot 27 t).
Our company can manufacture automotive spare parts like liner seals for the following truck brands: man / volvo / mercedes / renault / iveco / daf etc. Pls do not hesitate to contact us. Any kind of packaging (on request also kits)
PVC trunking Size 30x35 - 60x45 - 70x55 - 80x60 - 110x70 mm. complete of accessories for air conditioning systems Boxes lenght 2 meters
HVAC components
Lift Packages Any range for traction or hydraulic lifts , special and machine roomless , personalized projects .
Mould
Petroleum
WE SELL CLEAN hdpe drum regrind SERIOUS BUYER SHOULD CONTACT US FOR MORE DETAILS
