This machine for growing crystals by Kyropoulos method. KY sapphire growing machine “Omega” Sapphire boule are high efficient yield sapphire single crystal materials. Yield rate of the Kyropoulos sapphire boule more high then other known methods. Main applied for LED-industry.
Request
Features:
Closed water cooling system with proximity sensors control the flow and temperature of cooling water lines
Software enables programs to form heating-cooling, each of which comprises a sequence of independent segments, defined by three parameters: the increment of the voltage on the segment length of a segment of time and limit the voltage on the segment. It is possible to maintain these programs in the electronic memory of industrial computer. The software implemented the ability to "hot" switch from one program to another.
Control and monitoring provides a fully controlled by the user on the software and hardware levels of crystal growth process
Implemented the ability to control mechanical parts installation, implemented the ability programming parameters of the heater power
Furnace is equipped with preinstalled software on a perpetual commercial license
"hot" switch between automatic and manual types of control, at any moment you can stop the execution of the current program is automatically carried out the process and manually setting the new parameter set to continue process in automatic mode
Control and monitoring of the crystal growth is able to save all existing programmed parameters of the growth process in the nonvolatile memory.
Software is the preservation of all operator actions and changes all the setup parameters in nonvolatile memory.
Specification:
Sapphire crystals weight 30 - 150 kg
High automation of the process
Special adaptive software
Resistive heating
Working atmosphere: vacuum
Vacuum, torr: 2*10-6
Area required, sq. m : 10
Weight, kg: 2300
Power, kW: 40-100
Technological stages:
loading crucible;
pumping out working volume up to residual pressure 6x10-5 Tor;
heating raw materials to 2100 Celsius and melting it
seeding
decreasing of the power with a given speed
Sapphire crystal for:
LED substrate
Smartphones screens
Camera of smartphones lens
The specialized optical applications. Windows, lenses, prisms and etc
Lens of a photo and a video cameras
Screens protected schields
Watch industry applications
smart watches glasses such as «iWatch»
Armored protective sapphire glass as windows for military equipment and special devices
Sapphire plates as ballistic armor elements for vehicles
Individual protection viewport
Endoprosthesis
Protective housings and domes
This machine for growing crystals by Czochralski method. CZ wide range crystal growing machine “Oxide”. Applied for lab and industry crystal making. Automatical diameter control system. High precision weight meter system with exclusive direct weight control design. Czochralski furnace “Oxide” crystal growth of different type materials: BGO, LSO, LiNbO3, YAG, PbWO4 and many other. Oxide crystals by using the Czochralski method, such as lithium niobate, lithium tantalate, alum-yttrium garnet (YAG), gallium-gadolinium garnet, etc (GGG).
Request
Features:
Automatic growing ingot predetermined form (automatic diameter control)
The system of direct weighing growing ingot (exclusive)
Bottom rod with working and accelerate adjustable movement speed (supply for Customer request)
Frequency heating (up to 20 kHz) with automatic frequency oscillatory circuit
Furnace is equipped with preinstalled software on a perpetual commercial license
Closed water cooling system with proximity sensors control the flow and temperature of cooling water lines
Power stability of the heating system is not less than ± 0.01%
Software enables programs to form heating cooling, each of which comprises a sequence of independent segments, defined by three parameters: the increment of the voltage on the segment length of a segment of time and limit the voltage on the segment. It is possible to maintain these programs in the electronic memory of industrial computer. The software implemented the ability to "hot" switch from one program to another.
Many other features will added by Customer demand
Specification:
Inside height, mm: 400-1800
Inside diameter, mm: 400-800
Special adaptive software
Heating type: inductive or resistive
Run of the top rod, mm : 500-1200
Working atmosphere: vacuum, inert gas, hydrogen, oxygen
Scintillator
Laser
Piezoelectric
Different oxide crystals
High temperature
Special sensors
Science materials
Special optics
Ceramics and glasses
New high-tech materials
EFG furnace designed for growing shaped crystals (sapphire and other). Crystal growing machine by EFG method. "Orion" is sapphire crystal growing machine with max crystal weight 10 kg. The EFG machine can growing up to 38 tapes at one time. A crystal form depend from shaper. The furnace can be use for any profile products such as: tapes, tubes, profiles, rods, etc. Best effectivity solution for high quality sapphire glasses windows making. Lowest making cost for sapphire glass.
Request
Features:
Automatic growing ingot predetermined form (automatic growing crystal speed control)
The system of direct weighing growing ingot (exclusive)
Bottom rod with working and accelerate adjustable movement speed (supply for Customer request)
Resistive or Frequency heating (up to 20 kHz) with automatic frequency oscillatory circuit
Furnace is equipped with preinstalled software on a perpetual commercial license
Closed water cooling system with proximity sensors control the flow and temperature of cooling water lines
Power stability of the heating system is not less than ± 0.01%
Software enables programs to form heating cooling, each of which comprises a sequence of independent segments, defined by three parameters: the increment of the voltage on the segment length of a segment of time and limit the voltage on the segment. It is possible to maintain these programs in the electronic memory of industrial computer. The software implemented the ability to "hot" switch from one program to another.
Many other features will added by Customer demand
Specification:
Automatic growing including seeding
Presicion weight control system
Inside height of chamber, mm : 1000-1,400
Inside diameter of chamber, mm : 450-800
Run of the top rod, mm : 450-1000
Heating type: inductive or resistive
Working atmosphere: vacuum, inert gas
Vacuum, torr: 7,5*10-3
Area required, sq. m : 6-12
Max Crystal weight, kg: 10
Power, kW : 30-90
Weight, kg : 2150
Applications:
Smartphones screens cover
Sapphire optics lens
Smartphones camera lens
Tube for high-temperature lamps
Rods for medical
Vehicle armor optics
Science aparatus
Sapphire crucibles
Laser rods
Screens protected schields
Optical fiber
Sapphire glass for smartwatches
Individual protection viewport
Capillaries
Lance tip is associating with the central iron and steel research institute, we can optimize the lance nozzle by your steelmaking practice. This would be suitable for your high-efficient oxygen blast demand and shorten the time of blowing, then you will get a better steelmaking efficient.
The nozzle produced by the technology of vacuum casting has high-density organization with high copper purity, good thermal conductivity and long service life.
With reliable welding technology of copper, and steel, the products, adapt to high temperature and high strength working conditions.
The life of the nozzle used at the 250t bof of the second plant of baosteel increases by 30% than that the ordinary nozzle.
The assembled nozzle made by forging has the properties of closely grain, high-density organization, high temperature resistance and strong resisting fatigue.
By optimal designing the nozzle's inside passage of cooling water, the passage has smaller water resistance and good cooling effect.
We provide the clients with comprehensive and high-quality products by our exquisite and perfect technologies and offer specialized service support by highly efficient and rapid response capabilities, so as to spare no efforts in creating the utmost scientific and technological values for the clients. We sincerely hope that we can get ;;win-win;;¨¤ ending with insightful men from home and abroad hand in hand.
1200c muffle furnace is a ce certified high temperature furnace using high quality ceramic fiber board and resistance wire heating elements. The temperature of 1200c muffle furnace is controlled by high precision controller with accuracy +/-0.5 c and 51 segments programmable up to 1200c.
This type of furnace is widely used for materials or chemical lab to sinter all types of new materials samples. It is an ideal box furnace for sintering high purity ceramic material at high temperature without element contamination.
Muffle furnace features:
1) three sides resistance wire coil for fast and uniform heating serve as heating element
2) maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient high purity alumina fiber ceramic insulation.
3) double layer steel case with air cooling to ensure low surface temperature
4) design of sliding down door is for loading materials easily
5) furnace chamber: 250x320x450mm
6) built in precision digital temperature controller is 51 segments programmable to control heating rate, cooling rate and dwell time. Temperature control unit can be separated from furnace, and make moving at easy.
7) the furnace temperature is controlled by precision scr (silicon controlled rectifier) digital controller with accuracy +/-1c and 51 segments programmable up to 1200c
Muffle furnace applications
1. Gravimetric analysis
2. Sintering
3. Quantitative analysis
4. Heat treating
5. Glass preparation
Vacuum gas atomization powder equipment is characterized by small environmental pollution, high degree of ball-shape powder, low oxygen content and fast cooling rate and so on.
Analytical Chemistry: A muffle furnace can be used for sample pretreatment in analytical chemistry, such as ashing, combustion, and thermal decomposition of inorganic substances. They can also be used for the pyrolysis, dissolution, and removal of organic substances.
Coal quality analysis: used for measuring moisture, ash content, volatile matter content, ash melting point analysis, ash composition analysis, elemental analysis, and can also be used as a universal ashing furnace.
Ore smelting: In metallurgy and ore processing, muffle furnaces are used for sintering, reduction, and smelting of ores. They can provide a high-temperature environment to melt or undergo chemical reactions in the ore.
Ceramic technology: In ceramic manufacturing, muffle furnaces are widely used for sintering ceramic products, such as ceramic billets, ceramic coatings, and ceramic fibers.
Our three-pass full wet-back internal combustion boiler features a corrugated furnace and smoke tubes with internal ribs for increased heat transfer and stability. Constructed with full flange butt welding and an 'expand first, then weld' technique, it minimizes thermal stress and corrosion, enhancing longevity. The WNS boiler type offers automation, stable outputs, and is easy to maintain. Installation is straightforward and quick. By incorporating our pellet burner, your boiler can be transformed into an efficient biomass boiler. This modification offers a highly effective solution for ensuring a comfortable environment, even in extremely cold conditions.
The parameters of a single faucet water heater are as follows
Product model: 15L stepper water heater
Rated voltage
220V~240V (110V)
Capacity 15L
Rated power 3000W
Rated water volume 38L/h
Inner liner material 304 stainless steel
Product size 185 * 365 * 680mm
Our range of Muffle Furnace are best suitable for the laboratories and in various experiments. Muffle furnace is light weight with ceramic fiber wool insulation (instead of brick insulation).
820 Units of Brand new Centrotherm 2" x 120" Vent Length Gas/Furnace Line
Manufactured from environmentally friendly polypropylene, InnoFlue�® has been tested and is listed to all relevant American, Canadian and European Safety Standards. It is listed and warranted for sustained flue gas temperatures up to 230F (110C), thus providing enhanced performance properties and significant safety margins.
TL-5 model Indirect burning furnace with 5 layers sleeves consists of 5 parts: a blower, flue gas induced draft fan, burner, five-layer sleeve body and control system. The flue gas in the furnace takes two rounds while the fresh air takes three rounds.
Natural gas is burned through the burner to generate a high-temperature flame. Under the action of the flue gas fan, the heat is transferred to the heated air through the five-layer sleeve wall and dense fins, meanwhile the flue gas is discharging out the body after it´s temperature down to 150. The heated fresh air enter the sleeves through blower. After heat mix, the temperature rises to the setting number and sent out from the hot air outlet.
4ã??Advantages/features
1. Continuously provide pure air with constant temperature and constant pressure.
2. Temperature has a wide adjustable range: 40~300
3. Indirect heating, automatic operation, exhaust gas emissions meet the requirements
4. Reasonable design, compact structure, thermal efficiency up to 75%
5. Stainless steel high temperature resistant inner tank, durable
TL-4 model Direct burning furnace with 3 layers sleeve consists of 3 layers of cylinders. It uses fully burned natural gas to obtain high-temperature flame, and mixing this temperature with fresh air to achieve the required hot air device. Due to the use of fully automatic single-stage fire, two-stage fire or modulating burner, the output hot air is extremely clean by natural gas fully burned, , meeting the drying and dehydration needs for most stuffs. The external fresh air enter the furnace body under negative pressure, takes two strokes and sequentially cools the middle cylinder and the inner tank. After being fully mixed with the high-temperature flame in the mixing zone, it is extracted from the furnace body and enter the drying room. When the temperature reach the setting number, the main burner stops working and the auxiliary burner continues to burn to maintain the temperature. When the temperature drops to the set lower limit temperature, the main burner will be run again.
4ã??Advantages/features
1. Simple structure and easy installation
2. Small air volume, high temperature, adjustable from normal temperature to 500â??
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. The fresh air has a long stroke that can fully cool the inner tank, so the outer tank can be touched without insulation.
6. Equipped with high temperature resistant centrifugal fan, large pressure center and long lift
TL-3 model Direct burning furnace with lower Inlet and upper outlet is consists of 8 parts: natural gas burner + inner tank + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After fully combusts the natural gas inside the inner tank, it�´s mixed with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system.
4. Advantages/features
1. Simple structure and easy installation
2. Large air volume and small wind temperature fluctuation
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. High-density fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device.
8. Automatically replenish fresh air
TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place.
4. Advantages/features
1. Simple structure and easy installation
2. Large air volume and small wind temperature fluctuation
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. High-density fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
7. left and right fans run alternately in cycles to ensure even heating
8. Automatically replenish fresh air
TL-1 burning furnace is consists of 5 parts: natural gas burner + inner tank + insulation box + fan + control system. The burner forms a high-temperature flame after full combustion in the high-temperature resistant inner tank, these flame mixes with the cold or recirculated air to produce a new and high-temperature air. Under the action of the fan, it is discharged to provide heating for drying machines or places.
Advantages/features
1. Simple structure and low cost
2. Large air volume and small wind temperature fluctuation
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. High-density fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
