Lance tip is associating with the central iron and steel research institute, we can optimize the lance nozzle by your steelmaking practice. This would be suitable for your high-efficient oxygen blast demand and shorten the time of blowing, then you will get a better steelmaking efficient. The nozzle produced by the technology of vacuum casting has high-density organization with high copper purity, good thermal conductivity and long service life. With reliable welding technology of copper, and steel, the products, adapt to high temperature and high strength working conditions. The life of the nozzle used at the 250t bof of the second plant of baosteel increases by 30% than that the ordinary nozzle. The assembled nozzle made by forging has the properties of closely grain, high-density organization, high temperature resistance and strong resisting fatigue. By optimal designing the nozzle's inside passage of cooling water, the passage has smaller water resistance and good cooling effect.
Oxygen lance is used to decarburize, dephosphorize or extract alum This kind of product is used for converter and eaf Raw material: steel pipe The main functions of oxygen lance body are: to supply oxygen and cooling water to the nozzle, whose structure should meet the production needs of converting steel-making, and is favorable to the replacement and maintenance of nozzles, to compensate action force to oxygen lance nozzle caused by outer pipe in case of thermal expansion. Appropriate lance barrel length goes upward oxygen&water supply pipe and downward molten bath surface, oxygen supply meets the need of converter nominal tonnage, and water supply guarantees cooling performance of that the oxygen lance furniture. In this case, oxygen lance designed and manufactured is reasonable, safe and stable, energy-saving and low consumption, which is effective practical converting steel-making equipment.
The following are the characteristics: 1. The Copper Panel is made by vacuum smelting process technology, high purity copper, good thermal conductivity, and no defects such as pores, sand hole and unconsolidated. 2. Safe and reliable copper welding process makes the welded joint satisfies the requirment of high temperature and strength. 3. The perfect structure design and appearance meet the requirment of field use and completely replace the imported products. 4. Perfect internal waterway structure design, uniform waterway, closely mating, low flow resistance, and good cooling effect. Technical Parameter Chemical Composition:Cu=99.93% O= 30ppm H =1.0ppm Conductivity:=94%IACS Pressure test:Water pressure 1.5MPa maintain 30 min without leakage.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Supplier: Fly ash, granulated iron blast furnace slag (gbfs), potassium feldspar , sodium feldspar , stpp sodium tripolyphosphate, zirconium silicates & zirconium flours
Supplier: Brass components ,brass precision part,brass cable glands, brass molding insert,brass stop plugs,brass ppr inserts,brass hardware, brass & metal nozzles,brass nipples, brass sanitary part,brass bush and brass products,brass anchors & fasteners, brass lock nut & check nuts & dome nuts, brass turned components,brass inserts, brass auto parts, brass threaded stud, brass forging components, brass forging metal turning parts, brass shower header wall bracket socket,brass electrical components,brass shower hinges pipe to glass connector,brass shower header clamp,brass knob,brass pipe bush,brass guide bush,brass parts,brass tuned components,brass and metal precision parts,brass,ms,ss elbow fitting,brass terminal box connector,brass tee,brass,ms,ss,aluminium stand off(spacers),brass&ms&aluminium &steel metal adapter,brass&ms & aluminium & steel precision turned components,brass & ms& aluminium & steel & metal nuts, bolts, washers, zinc (zamak,mazak) metal parts, brass & ms, ss, zinc, aluminium
Services: Manufacturer & exporter
About THE Product : Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement). Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications. Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties. Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste. Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water. Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium. GBFS : (Granulated Blast Furnace Slag) Source : Granulated BF Slag From Gujarat State, India Supply Quantity : 50,000 Metric Tons Per Month Packing: Bulk Parameters (% BY MASS) CaO 30-38 Al2O3 15-20 SiO2 30-40 Glass Content 85-97 MgO 8-11 Fe2O3 0.5-1.5 Moisture 10 MAX Size -5mm Min 95, +5 mm Max 5 Relative Gravity 2.9 Bulk Density(Bagged) 1200 KG/M3