Mulching Film / Paper .& Bio degradable mulching Paper These are made of LLDP material Available in various thickness from 21 micron to 100 micron. Maximum length from 400 Mtr to 800 Mtr & width is 0.75 Mtr to 1.5 Mtr. Packing - In roll covered in polythene sheet. Minimum Order 5000 Roll
Product Introduction Customized titanium fiber felt for the fuel cellis a high-performance material made through a process of sintering titanium fibers. The result is a porous and lightweight material that is exceptionally strong and corrosion-resistant. The material is commonly used in industries such as aerospace, chemical processing, and medical equipment manufacturing. Customized titanium fiber felt for the fuel cell is a versatile and high-performance material that has a wide range of applications in and GDL. Its unique combination of properties, including high porosity, good electrical conductivity, and thermal stability, make it an attractive material for various industrial applications. Parameters Material: Ti Porosity: 50%-80% Size: 1000 2000mm Thickness: 0.2mm-1.0mm(0.2mm 0.4mm 0.8mm 1.0mm) Filtration rate: 10um 20um 30um and so on Features: Sintered titanium fiber felt is a unique material that possesses several features that make it ideal for various industrial applications. Firstly, the material has a high strength-to-weight ratio, making it an attractive choice for applications where weight is a critical factor. Additionally, sintered titanium fiber felt is highly resistant to corrosion, even inharsh environments, making it an excellent choice for chemical processing applications. The material is also highly durable and can withstand high temperatures, making it a suitable choice for aerospace applications.
The multi-layer metal sintered mesh filter element is made of metal meshes with different wire diameters and meshes sorted in a certain order and sintered at high temperature. It has higher strength than stainless steel fiber felt, better permeability than metal powder products, uniform pore size distribution, good permeability, high strength, strong corrosion resistance, high temperature resistance, weldable, renewable, long life, easy to clean and not easy to break. Product parameters Material: stainless steel 304 or 316L; Size: 1000mmx500mm, 1200mmx600mm, 1000mmx1000mm (customizable); Filtration accuracy: 2um-300um; Classification: single-layer, double-layer, three-layer, five-layer, seven-layer and multi-layer metal Note: Special specifications can be customized according to the requirements of the buyer. Features 1.High strength and durability: This feature is achieved through high temperature sintering, which is a process of sintering material through heat and pressure without melting it. The high temperature sintering process enables the material to have a high level of strength and durability, making it resistant to wear and tear. 2.Anti-corrosion and heat resistance: This material can withstand high temperatures up to 600 C and is resistant to corrosion, which makes it ideal for use in harsh environments. 3.Steady filter rating: This material has a steady filter rating that ranges from 2 micron to 300 microns. This means that it can effectively filter out particles of different sizes, making it suitable for a wide range of applications. 4.Filter mesh not easy to deform: The filter mesh is protected by two layers, which makes it difficult to deform. This feature ensures that the filter mesh maintains its shape and continues to function effectively even under high pressure or high viscosity environments. 5.Versatile in manufacturing processes: This material can be cut, bent, punched, stretched, and welded, making it versatile in manufacturing processes. It can be easily customized to fit different shapes and sizes, making it suitable for a wide range of applications. Application aspects and industries Metal meshes of various wire sizes are sorted in a specific sequence, sintered at high temperatures, and used to create the multi-layer metal sintered mesh filter element. It is stronger than stainless steel fiber felt, more permeable than metal powder goods, evenly distributed pore size, strong corrosion resistance, high temperature resistance, weldable, renewable, long-lasting, simple to maintain, and difficult to break. Multi-layer metal sintered mesh filter elements have many applications in the filtration of high-temperature and high-pressure media (liquid-solid separation, gas-solid separation), including oil sand separation in oil fields, high temperature gas dust removal, beverage filtration, oil filtration, and water treatment.
The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and then sintered under high temperature and high vacuum conditions. The resulting filter element contains countless micropores that are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. Product parameters Outer diameter: 20 100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1.Precise and uniform porosity: The stainless steel filter boasts highly accurate and uniform porosity, which ensures precision in filtration. The countless micropores inside the filter are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. 2.Excellent mechanical properties: The filter has excellent mechanical properties, including impact resistance and alternating load. It has a stable shape with low resistance to filtration, enabling high permeability. 3.High-temperature resistance: The stainless steel filter has a high temperature resistance of up to 600, making it suitable for use in high-temperature environments. It exhibits a stable separation effect, and its good chemical stability provides high resistance to corrosion at high temperatures. 4.Easy to regenerate: The filter is easy to regenerate, enabling simple reverse cleaning and ensuring an extended service life. It is easy to weld, with seamless welding lengths of up to 1500mm, and the filter is highly versatile, making it suitable for use in a wide variety of applications. Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry. Processing: The production process of stainless steel filters involves monitoring all raw materials, including the metallurgical composition, particle size distribution, and bulk ratio of the metal powder. After being formed through cold isostatic pressing, the filter is sintered at high temperature and high vacuum.
Stainless steel pleated filters cartridge is a type of filter element that is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants. Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases. parameters Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request. Filter rating 1-300 microns Flow rate: 80-200l/min Working pressure:1.5 bar-250 bar Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc. Working temperature: 600 Features 1.High Strength Against High Differential Pressures: These filters can withstand high differential pressures without loss of their filtration efficiency or structural integrity. 2.Large Surface and Filtration Area: The pleated design of these filters results in more pleats in the stainless steel filter, which means a larger surface and filtration area. This provides a greater ability to capture contaminants. 3.Washable and Reusable: The stainless steel filter element is washable and reusable, which prolongs its service life and reduces the frequency of filter replacement. This saves money and reduces waste. 4.Excellent Heat and Corrosion Resistance: These filters are highly resistant to heat and corrosion, making them suitable for use in harsh environments where other filters may fail. Applications Oil and gas production: are used in the oil and gas industry to filter out contaminants from crude oil, natural gas, and other fluids. Chemical processing: These filters are used in chemical processing to remove impurities from chemicals and solvents. Water treatment: are used in water treatment plants to remove sediment, debris, and other contaminants from the water supply. Food and beverage production: These filters are used in the food and beverage industry to filter out impurities and ensure product quality. Pharmaceutical production: are used in the pharmaceutical industry to filter out contaminants and ensure product purity. Automotive and aerospace industries: These filters are used in the automotive and aerospace industries to filter out contaminants from hydraulic fluid, lubricating oil, and other fluids used in machinery. Industrial air filtration: are used for industrial air filtration to remove dust, smoke, and other airborne contaminants from the air.
Product Introduction Metal powder serves as the only raw material for the sintered metal powder filter; no binders are used. It is generated by cold isostatic pressing and then sinters at high temperatures. By adjusting the process parameters and metal powder particle size, the pore size and distribution of the component can be changed. Utilize the pore structure, material composition, compressive strength, and other characteristics of different filter materials to develop filter products suitable for users. When the filter cake on the surface of the sintered metal powder filter element reaches a certain thickness, due to its high-strength performance characteristics, by backwashing or backflushing the filter element under a specific reverse pressure, the filter element can be cleaned and reused. Product parameters Material: stainless steel powder, brass powder, titanium powder Diameter: Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface form: M20 M30 222 226 Filtration accuracy: 0.45 micron 1 micron 3 microns 5 microns 10 microns 20 microns 30 microns 50 microns 80 microns 100 microns
Metal powder serves as the only raw material for the sintered metal powder filter; no binders are used. It is generated by cold isostatic pressing and then sinters at high temperatures. By adjusting the process parameters and metal powder particle size, the pore size and distribution of the component can be changed. Utilize the pore structure, material composition, compressive strength and other characteristics of different filter materials to develop filter products suitable for users. Product parameters Material: stainless steel powder, brass powder, titanium powder Diameter: Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface form: M20 M30 222 226 Filtration accuracy: 0.45 micron 1 micron 3 micron 5 micron 10 micron 20 micron 30 micron 50 micron 80 micron 100 micron Features Strong resistance to corrosion An inert metal with exceptional corrosion resistance is titanium. Strong alkali and strong acid media can be filtered using the titanium metal rod filter element. It has a wide range of applications in the chemical industry and in the filtering of the pharmaceutical industry's organic lysozyme production process. Good tolerance to high temperatures The titanium filter element has a high temperature resistance that goes up to 300C. In operational situations with high temperatures, this function is frequently used. The temperature resistance of the filter element made of polymer materials is normally limited to 50 C. The support and filter membranes will alter if the temperature goes beyond 50 C. It is frequently employed in the filtration of high-temperature liquids and steam filtration (steam filtration in fermentation processes), despite having a significant accuracy variance. Superior mechanical qualities With external pressure of 20 kg and internal pressure of 10 kg of destructive force, the titanium rod filter element has strong mechanical qualities and may be utilized in high pressure and quick filtration processes. The pore size of other polymer filter components will fluctuate or even break down when the external pressure is more than 0.5 MPa. Good regeneration Due to its superior corrosion resistance, high temperature resistance, and high strength performance, titanium rod filters have a good regeneration effect. There are two types of regeneration: chemical regeneration and physical regeneration treatment. Physical regeneration method: (1) Pure water recoil (2) Steam blowback (3) Ultrasonic cleaning Chemical treatment method: (1) Alkaline washing (2) pickling Applications Catalyst filtration and separation; Filtration of fluidized bed tail gas in petrochemical facilities and of high-temperature gas in the petrochemical industry; High-temperature flue gas purification in the metallurgical industry;
Product Introduction Stainless steel powder sinter filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1m-100m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:
Stainless steel powder sintered filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1 m-100 m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:
Product Introduction Stainless steel hydrogen-rich water machine accessories - hydrogen dissolving rod, made of food-grade stainless steel, can be applied to various machines for making hydrogen-rich water. Sintered one does not fall off, does not drop powder, high temperature resistance, pressure resistance, stronger and more durable than PE plastic; uniform porosity, high filtration accuracy, can evenly produce very small bubbles, so that hydrogen can be better integrated into the liquid ;The contact area is large, the circulation speed is fast, the efficiency is high; and it is long-lasting and simple to clean. It is widely used in portable hydrogen absorption household accessories, hydrogen machines, high-concentration hydrogen generators and other equipment. Product parameters Product category: Accessories Power: customized Material: Stainless steel Pore size range: 0.5-65 microns Features 1. Stainless steel material: 316L stainless steel material, which can withstand high temperature of 600 C and high pressure; 2. Accurate pore size: evenly distributed, the size of the filter holes is uniform and evenly distributed, and the pore size range: 0.5~65 microns; 3. No increase in solid particles: there is no hidden danger of metal particle precipitation, the structure is stable, the particles are tightly combined, no migration, no slag, no chips
Products Description Sintered copper powder filter element is also called sintered copper. Like titanium and stainless steel powder sintered filter elements, it is also a breathable porous material formed by molding, isostatic pressing, etc., and then sintered by high temperature vacuum. It is a new type of material used in filtration and high-tech industries. Due to the advantages of stable pores, good strength, large amount of dirt, can be directly processed on the substrate, can be cleaned, and can be customized according to the required shape and size, sintered copper powder filter element has been widely used in pneumatic cylinders, electronic accessories, hydraulic filter elements, air dust removal, and gas distribution. , heat sink, mold making and other industries. The selection of precision is very critical In the process of using the sintered copper powder filter element, the selection of precision is very critical. If you choose a product with a smaller precision, if there is no corresponding pressure, the product flow will decrease and cannot meet the flow requirements; if you choose a product with a higher precision, it will It cannot intercept the required impurity particles, and cannot achieve the effect of filtering or dust removal. If it is used in a high temperature environment, it will also have a certain impact on the performance of the product. Features 1. Sintered copper powder filter element has stable penetration and high filtration accuracy; 2. Can better withstand thermal pressure and impact; 3. High strength, good plasticity, anti-oxidation, corrosion resistance, good assembly; 4. Strong regeneration ability and long service life; 5. Sintered copper powder filter element is resistant to rapid cooling and rapid heat, and has better performance than filters made of paper, copper wire mesh and other fiber cloth, and is easy to assemble, disassemble and clean; 6. It can work at higher temperature and in corrosive medium, and can be welded, bonded and machined. Main application of the product 1. Pneumatic valve cylinders and other pneumatic components are used to filter air, remove impurities in the air or gas distribution, decompression, interception, etc., and are fixed and installed by interference, stamping, screwing, threads, and clamps. 2. Oil-gas separation, solid-liquid separation, and oil-removal impurity filtration and separation, according to experience, can operate continuously under a pressure of 20Mpa, and can effectively remove impurities in the pore size according to different conditions of precision and pressure.
Titanium powder sintered filter disc is made of industrial pure titanium powder (purity 99.6%) as raw material, which is formed by rolling the powder and then sintering at high temperature and high vacuum. There is no need to add any binder during rolling. Because the raw material is high-quality titanium powder, the titanium powder sintered filter has a uniform structure, a porosity between 30% and 40%, a filtration accuracy of 0.22 microns to 100 microns, and high separation and purification efficiency. High temperature resistance, acid and alkali corrosion resistance. The sintered products are laser cut or lathe cut according to the size and style required by customers. The main shapes are: round, square, hexagonal and special-shaped pieces. Product parameters Product name: Customized porous titanium powder sintered filter disc for beverage filtration Filtration accuracy: 10 microns Porosity: 35% Size: 40mm 40mm (customized) Applicable temperature: 300 Features 1. Porosity, good air permeability; 2. Depth filter; 3. Easy to clean and backwash, long service life; 4. Narrow pore size distribution; 5. High separation efficiency and good filtration performance; 6. Corrosion resistance. The main usage Mainly used for liquid-solid separation of beverages, reverse osmosis pre-filtration
Sintered stainless steel mesh filter is a new type of filter material made of multi-layer metal woven wire mesh through special lamination pressing and vacuum sintering. The meshes of each layer of wire mesh are interlaced to form a uniform and ideal The filtration structure has excellent filtration accuracy, filtration resistance, mechanical strength, wear resistance, heat resistance, cold resistance and processability, especially ideal for filtration that requires high compressive strength and uniform filtration precision. Parameters: Material: 316L stainless steel Filtration accuracy: 0.22-100um Size: standard or customized Application: (1) Used as dispersion cooling material in extremely high temperature environment; (2) Orifice plate material for gas release liquid fluidized bed; (3) Used for high-precision, high-reliability high-temperature filter materials; (4) Used for high pressure backwash oil filter. Examples: (1) Precision filtration of various hydraulic oils and lubricating oils in the machinery industry; (2) Filtration and purification of various polymer melts in the chemical fiber film industry, filtration of various high-temperature corrosive liquids in the petrochemical industry, filtration, washing and drying of materials in the pharmaceutical industry; (3) Application of gas homogenization in powder industry, fluidized plate in steel industry; (4) Buzzer, etc. in explosion-proof electrical appliances; (5) Gas-solid, liquid-solid, gas-liquid separation. Performance advantages: 1. High strength and rigidity: high mechanical strength and compressive strength; 2. High precision, uniform and stable: uniform filtering performance can be achieved for the filtering particle size with a precision of 1~300 m, and the mesh does not change during use; 3. Wide range of use environments: It can be used for filtration in temperature environments ranging from -200 C to 650 C and acid-base corrosive environments; 4. Excellent cleaning performance: good countercurrent cleaning effect, can be used repeatedly, and long life (can be cleaned by countercurrent water, filtrate, ultrasonic waves, dissolution, baking, etc.).
Sintered titanium powder filter with a flange connector is a kind of porous filter element which is made of industrial high-purity titanium, after sieving, cooling and isostatic pressing, and then sintered at high temperature and high vacuum. It has excellent properties such as corrosion resistance, high-temperature resistance, high strength, easy to ensure filtration accuracy, and easy regeneration. It is suitable for the filtration of various corrosive media, such as hydroxide, seawater, aqua regia and the filtration of chloride solutions such as iron, copper, and sodium. Product name:Sintered titanium powder filter with flange connector Specifications:OD20 WT2.5-3.0 L200mm Filtering accuracy:30um Connector:Flange connector Packaging: Standard export wooden case or according to the customer's request Delivery: By sea & Air Shipping & International Express Lead time: Generally around 3-7 days for sample,7-15 working days for order, it's according to quantity. Advantage 1, Uniform structure, narrow pore size distribution, high separation efficiency. 2, High porosity, low filtration resistance, high penetration efficiency. 3, High temperature resistance, Normally can be sued up to 280 degrees. 4, Good chemical stability, acid and alkali corrosion, antioxidant properties. Applications 1. pharmaceutical industry, such as infusion, small injections, eye drops, oral liquid the filtration before the end. 2. impurity filter, decarbonization filter and precision filter during the productuon of medicine. 3. Security filter for UF system, RO system and EDI system in water treatment, and filtration after ozone sterilization. 4. Food and beverage industry such as drinks, juice, wine, beer, vegetable oil, mineral water, soy sauce etc.filtration. Packing and Delivery: In order to protect them from rubbing,make them wrapped with plastic bags respectively. kraft paper is used to fasten the plates together,protect them from scattering. Putting the foam in the wooden cartoon to protect them better while shipping. Finally put the goods into wooden cases.
RUBBER BLADDER FOR CWP NXQ-A1.6/20-H-HT for power system is specialized in manufacturing and providing components for turbines, coal-fired generators, and hydro units, as well as for electrical equipments, machinery parts, hydraulic machinery and parts. Our company is seated in the famous industrial city - Deyang with advanced technology, complete facilities and scientific management. Productions are in strict accordance with national standards. Need more products for power plant now if you don't know where to search a product. DF-RUBBER BLADDER FOR CWP NXQ-A1.6/20-H-HT-DF Filter Discharge TLX268A/20 cross reference oil filter HCY0113FKZ16Z hydraulic filter press FX-190-25H Bolt Heater Stick ZJ-20-36 oil filter price WUI-A400*50FS lvdt 20mm sensor TD-01 Direct-Operated Servo Valves MOOG-J761-004 Switch 4RN-EE4-M4-C1A china cartridge filter ZCL-1-450 EH oil pump oil-return filter DP401EA03V/-W china cartridge filter stainless steel filter cartridge GY93-100*30 hydraulic oil filters ZALX110*250-MZI Heater rod ZJ-20-T14 Generator Carbon Brush NCC634 filter housing cartridge Q3U-H160*3S Coalescence Filter QYLX-400*10Q2 pressure hose S100-AC-FB-0150 oil hydraulic filter HC5020F2016H thermal resistance WZPM2-12,50-G 1'2.S china cartridge filter STZX2-25*5 sliding vane pump PVT38-2R5C-C03-S00 hydraulic oil filter remover YWU-40*80-J hydraulic filter micron rating CFRX-630*30Q Duplex oil filter SFX-1300*30 Oil purifier coalesce filter GY135-100*20 dc speed control sensor DF6101-005-065-02-03-00-00 hydraulic oil splitter (servo valve) MOOG-072-559A air side sealing oil pump core HSNH280-43Z SAIMO SM6000 DOUBLE A/D BOARD V14-09-23 Element Oil filter FX190-10H Accessories for accumulator NXQAB-10/31.5-2-A hydraulic oil filter pump with cart TZX2.BH-630*20 element filter XU-63*100J machine oil filter FAX (NX)-63*5 excavator filter element LH0030D10BH/HC RUBBER BLADDER FOR CWP NXQ-A1.6/20-H-HT oil and filter CFRX-1100*5Q best oil filter HCY0106FDS8Z oil filter price DP2B01EA10V/-W Steam Turbine Bolt Electric Heater RJ-17.5-1050 hydraulic return oil filter TZX2.BH-630*5 lube station filter DQ150AW25H1 solenoid valve comparable replacement to hydraforce sv08-30 4WE6D62/EG220N9K4/V High pressure hose for Stator cooling water pump DFB100-65-260 Sealing ring of EH oil system HB4-56J8-154 ac pressure switch RC861CZ090HSSYR24DC Oil cooler Duplex filter HX-10*30 High Temperature Sealant COPALTITE LIQUID 5 Oz. Insulation Adhesive 793A Oil-water alarm OWK-1G BFP EH oil system filter 0508.1031T0102.AW010 Heat bypass valve JL015082 Solenoid valve FRE.WJA3.001 RUBBER BLADDER FOR CWP NXQ-A1.6/20-H-HT DFYL-2022-8-3-ZJ
Media: Activated carbon Frame: Cardboard Efficiency:H10-H14
Features 1.ldeal for capturing and culturing microorganisms in the Water and wastewater industry. 2.Used to determine particulate contamination of lubricating oil and hydraulic fluid in patch test kits. 3.Available in pore sizes 0.22um and 0.45um, colored black, with a gridded surface. 4.Compatible with gamma irradiation.
For removing particulates reducing signal-to-noise ratios and maintaining flat baselines. Filtering aqueous and organic solutions. Two types in pore size: 0.22um and 0.45um. Three types in filter size: 13mm, 25mm and 30mm.
High mechanical and tensile strength. Used for most organic solvents and mid-polar liquids. Two types in pore size:0.22 m and 0.45 m. Three types in filter size:13mm, 25mm and 30mm. Note: Nylon binds protein, do not use when high protein recovery is desired.
We offer a wide range of high pressure filtration solutions to meet with your fluid power transmission system requirements. Hydraulic High Pressure Inline Filters Models : MS450-040 ,063 ,100 ,160 ,250 ,400 Pressure line filters are installed on the hydraulic system line and ensure that the used oil is constantly filtered / cleaned. Return Line Filter Element Filter Element DIN Standard 24550 Models are ; MS010-040, 063, 100, 160, 250 Return filters are located on the return line of the fluid to the tank on the hydraulic systems. It filters the materials formed in the system like dirt, filth, etc. and ensures that the hydraulic fluid in the tank is clean. Usage Areas are ; Industrial Hydraulic Mobile Hydraulic Marine Hydraulic Open-sea Hydraulic Space Hydraulic
