Stainless steel pleated filters cartridge is a type of filter element that is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants.Â
Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases.Â
parameters
Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request.
Filter rating 1-300 microns
Flow rate: 80-200l/min
Working pressure:1.5 bar-250 bar
Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc.
Working temperature: 600
Features
1.High Strength Against High Differential Pressures: These filters can withstand high differential pressures without loss of their filtration efficiency or structural integrity.
2.Large Surface and Filtration Area: The pleated design of these filters results in more pleats in the stainless steel filter, which means a larger surface and filtration area. This provides a greater ability to capture contaminants.
3.Washable and Reusable: The stainless steel filter element is washable and reusable, which prolongs its service life and reduces the frequency of filter replacement. This saves money and reduces waste.
4.Excellent Heat and Corrosion Resistance: These filters are highly resistant to heat and corrosion, making them suitable for use in harsh environments where other filters may fail.
Applications
Oil and gas production: are used in the oil and gas industry to filter out contaminants from crude oil, natural gas, and other fluids.
Chemical processing: These filters are used in chemical processing to remove impurities from chemicals and solvents.
Water treatment: are used in water treatment plants to remove sediment, debris, and other contaminants from the water supply.
Food and beverage production: These filters are used in the food and beverage industry to filter out impurities and ensure product quality.
Pharmaceutical production:Â are used in the pharmaceutical industry to filter out contaminants and ensure product purity.
Automotive and aerospace industries: These filters are used in the automotive and aerospace industries to filter out contaminants from hydraulic fluid, lubricating oil, and other fluids used in machinery.
Industrial air filtration: are used for industrial air filtration to remove dust, smoke, and other airborne contaminants from the air.
Product Introduction Stainless steel pleated filters cartridge is a type offilter elementthat is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants. Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases. parameters Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request. Filter rating 1-300 microns Flow rate: 80-200l/min Working pressure:1.5 bar-250 bar Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc. Working temperature: 600 Features 1. High Strength Against High Differential Pressures 2. Large Surface and Filtration Area 3. Washable and Reusable 4. Excellent Heat and Corrosion Resistance
The stainless steel pleated filter cartridge is a type of filter cartridge that uses single or multiple layers of stainless steel woven mesh as the main filter material. The sealing surface of the filter element adopts an argon arc welding process, and the filter layer is processed by folding 3-5 layers of stainless steel mesh. The filter layer is supported and reinforced by two layers of mesh on the inside and outside, with the actual filtering layer in the middle. The seams are welded using argon arc welding to form a complete filter cartridge that does not leak or allow any medium to pass through. The filter material used is stainless steel woven mesh, which is made of stainless steel wire of different diameters woven to different mesh sizes. The pleating creates a larger surface area for the filter, allowing it to trap more particles and contaminants than a flat filter of the same size. Parameter: Material: SS304 or SS316 Filtration Accuracy: 1 - 200 microns Size: Customized Operating temperature: 650 Features: Filtration efficiency: Pleated stainless steel filters offer high filtration efficiency due to their large surface area and multiple layers of mesh. They can remove a wide range of contaminants from liquids and gases, including particles, debris, and sediment. Durability: Stainless steel is highly durable and corrosion-resistant, making pleated stainless steel filters suitable for use in harsh environments, such as chemical processing plants and oil and gas refineries. Customization: Pleated stainless steel filters can be customized to meet specific filtration requirements. They can be designed with different sizes, shapes, and micron ratings to suit different applications. Temperature and pressure resistance: Stainless steel is capable of withstanding high temperatures and pressures, making pleated stainless steel filters ideal for use in a wide range of industrial applications. Reusability: Pleated stainless steel filters are reusable and can be cleaned and reused multiple times, making them a cost-effective and environmentally friendly filtration solution. Applications: Oil and gas industry: Pleated stainless steel filters are used to remove contaminants from oil and gas during production, refining, and transportation. Food and beverage industry: Pleated stainless steel filters are used to filter liquids and gases in food and beverage production, ensuring product quality and safety. Chemical processing industry: Pleated stainless steel filters are used to remove contaminants from chemicals and solvents during production and processing. Pharmaceutical industry: Pleated stainless steel filters are used to filter liquids and gases in pharmaceutical production, ensuring high product purity and quality. Water treatment industry: Pleated stainless steel filters are used to remove contaminants from water in water treatment plants and other applications.
Description Yitong stainless steel pleated filter cartridges attains their superior performance due special filter medium, composed of 100%, 316L random fiber stainless steel. The unique calendering process compresses the fiber matrix to form specialized filter media which provides consistently high porosities and large filtration areas. The metal structrue provides perfect strength, which helps it to wothstand high pressure drop. Feature 1 High porosity, low pressure drop 2 High temperature and high pressure resistance 3 Suitable for filtration of high viscous liquids 4 Suitable for filtration under high temperature condition 5 Easy to clean. Application 1 steam filtration 2 filtration of strong acid and alkali 3 filtration of the corrosive liquid 4 filtration of liquid and gas under condition of high temperature 5 Decarburization filtration 6 Filtration of viscous liquid
Product Introduction The stainless steel pleated filter cartridge is a type of filter cartridge that uses single or multiple layers of stainless steel woven mesh as the main filter material. The sealing surface of the filter element adopts an argon arc welding process, and the filter layer is processed by folding 3-5 layers of stainless steel mesh. The filter layer is supported and reinforced by two layers of mesh on the inside and outside, with the actual filtering layer in the middle. The seams are welded using argon arc welding to form a complete filter cartridge that does not leak or allow any medium to pass through. The filter material used is stainless steel woven mesh, which is made of stainless steel wire of different diameters woven to different mesh sizes. The pleating creates a larger surface area for the filter, allowing it to trap more particles and contaminants than a flat filter of the same size. Parameter: Material: SS304 or SS316 Filtration Accuracy: 1 - 200 microns Size: Customized Operating temperature:â?¤650â?? Features: Filtration efficiency: Pleated stainless steel filters offer high filtration efficiency due to their large surface area and multiple layers of mesh. They can remove a wide range of contaminants from liquids and gases, including particles, debris, and sediment. Durability: Stainless steel is highly durable and corrosion-resistant, making pleated stainless steel filters suitable for use in harsh environments, such as chemical processing plants and oil and gas refineries. Customization: Pleated stainless steel filters can be customized to meet specific filtration requirements. They can be designed with different sizes, shapes, and micron ratings to suit different applications. Temperature and pressure resistance: Stainless steel is capable of withstanding high temperatures and pressures, making pleated stainless steel filters ideal for use in a wide range of industrial applications. Reusability: Pleated stainless steel filters are reusable and can be cleaned and reused multiple times, making them a cost-effective and environmentally friendly filtration solution.
Stainless steel Pleated cartridge is manufactured using either stainless steel wire mesh or sintered metal fiber felt. It undergoes a sintering process at each wire contact point, resulting in a robust surface-sieving porous filter cylinder. Additionally, the filter element is designed with pleats, providing a larger filter area and excellent dirt-holding capacity. Customers can choose between double open-ended or single open-ended configurations, while threaded ends are often equipped with gaskets like o-rings to minimize friction on the corrugated filter. Compared to unsintered mesh filters, pleated sintered mesh filters allow for the use of finer wires, resulting in a higher number of pores per unit area and increased contaminant loading capacity. Moreover, Stainless steel pleated sintered filter cartridges are preferred replacements for PP filter cartridges due to their backwashing capability and reusability advantages. They find applications in corrosive liquid filtration, oxidizing liquid filtration, as well as liquid and gas filtration. Pleated wire mesh filters consist of a fine wire filtration mesh that is folded repeatedly in a back-and-forth pattern, enabling a large surface area of mesh to fit within a compact housing. This design facilitates fine filtration with a high dirt-holding capacity while minimizing backpressure. The pleated fine mesh is supported by a rigid core or bound by stiffer coarse mesh to maintain its shape. The filter is then capped at both ends to form a complete pleated stainless steel filter cartridge. Parameters: - Material: 316 stainless steel - Length: 10 inch( Other size can be customized) - Micron Rating: Available in various micron ratings (e.g., 1, 5, 10, 20 microns, etc.) - End Cap Type: DOE (Double Open End) or SOE (Single Open End) - End Cap: 222, 226, NPTF, NPTM, Thread, Fin - Operating Temperature Range: up to 600�°C
Material: high carbon spring steel, spring steel, stainless steel, alloy steel Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm Torsion spring wire diameter :0.2-35mm Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution. Extension spring hook include Germany hook, British hook, Side hook We can customize special design of springs based on your requirement.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Supplier: Metal products, all types of metals steel pipe seamless and welded, galvanized steel coil, steel sheet PPGI, stainless sheet, aluminum coil, ingots scrap angel bar, H steel beam, and deformed steel bar are widely applied to auto industry, household appliances, construction industry, and highway guardrail construction
Services: Trading, recycling
Buyer: Metal products, recycling machine, waste materials, agricultural products
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, textile fiber, rubber, plastic, paint drier, plasticizer, flame retardant, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, ms pipe, pipe fitting, flange, fasteners, steel wire
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
