4-methylcatechol can produce sterilize, antiphlogistic, eliminate tetter, cure various skin diseases, good result in stopping itching, obvious result in reducing swelling & pimple. 25kgs-200kgs(buckets/cardboards)
Basic dyes, direct dyes, cationic dyes, acid dyes, disperse dyes, soda ash light / dense, caustic soda flakes, sodium hydrosulphite 90%, sodium sulphate anhydrous 99%, potassium chlorate 99.5%, ammonium phosphate dibasic 98%, ammonium phosphate monobasic, organic pigment, inorganic pigment.
Guaiacol, methylguaiacol, ethylguaiacol, methylcatechol.
Chemicals.
Industrial Chemicals..
Refined chemicals and non-ferrous metals, petrochemicals.
Chemicals, pharmaceutical products, urea 46%, npk, cement, sulfur, rock phosphate.
Gum rosin, glycerol ester of gum rosin, phosphoric acid, PCE, SLES, LABSA.
Detergent grade CMC sodium, carboxy methyl, cellulose sodium, carboxy methyl, cellulose for detergent powder.
Product Property: Molecular formula: Zn Molecular Weight: 65.38 Physical Property: light grey metal fine powder. Density: 7.14g/cm3 Melting Point: 419.4¡ãC Boiling Point: 908% Chemical property: insoluble in water, soluble in acid and alkali, slowly soluble in acetic acid, ammonia water, it has strong reducing performance and give out hydrogen. Lumps when being wet, keeps stable in dry air and generates white basic carbonate covering in its surface in wet air. When combusting in the air, it can generate blue green flame and generate zinc oxide. High pure zinc act slowly with sulfuric acid and nitric acid, while act fast when it contains few of other metals such as steel, tin and lead.
Product characteristics: The highly active Zinc powder produced by our company has some characteristics of high contain of Zinc, low impurity elements, smooth surface, large surface area, small density of loose-powder, little oxide on surface, melting deformation and little grape shaped particles after sticking, average particle diameter is 0.1-4¦Ìm, total Zinc contain is more than 98.5%, metal Zinc contain is more than 96%.
Zinc ingot. Package: Bundled up with galvanized steel strips
Metal abrasive Here belowed is the scope of our products Steel shot: s70 s110 s130 s170 s230 s280 s330 s390 s460 s550 s660 s780 Steel grit: g10 g12 g14 g16 g18 g25 g40 g50 g80 g120 Steel cut wire shot: 1.0mm 1.2mm, 1.5mm, 2.0mm Stainless steel cut wire shot, 0.3mm, 0.4mm, 0.5mm, 1.6mm, 0.8mm, 1.0mm Steel abrasives are used to clean a wide variety of surfaces and parts, for example De-sanding and cleaning foundry castings Descaling metal sheet, billets and profiles produced by the steel industry Surface preparation prior to coating Steel abrasives are used in the following industries and applications: Foundries, metal producers, shot peening, surface preparation, general cleaning, granite cutting, Chemical composition of the products: C 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%. Hardness: Steel shot: 40-60hrc Steel grit: 42-66hrc Steel cut wire shot:1.0mm:51-53hrc ; 1.5mm:41-45hrc Density: Steel shot: 7.4g/cucm Steel grit: 7.6g/cucm Steel cut wire shot:7.8g/cucm Microstructure: tempered marten site High strength, long lasting ervin life: cast steel shot and grit: 2000 cycles; Steel cut wire shot: 2800 cycles. 25kg in one bag, 40bags on one pallet, 20mt for each container
Commodity/Product: Electrolytic Copper Cathode Plates Fineness: 99.99% Cu; but not lower than 99.97% (inferior quality to be rejected) Quality: Non LME registered but in compliance with LME Grade A specifications Origin: Democratic Republic of Congo LME: London Metals Exchange (www.lme.com) Physical Dimensions Length 914 mm (LME standards) Width 914 mm (LME standards) Thickness 12 mm (LME standards) Net weight per sheet 125 Kg (Approx.) (+-2%) Net weight per pallet 2 Mtons (Approx.) (+-2%) Net weight per container 20 Mtons (Approx.) (+-2%) Gross weight per container 22,2 Mtons (Approx.) (+-2%) Packing palletized banded by aluminum bands Chemical Composition Elements Value Copper Cu 99.97% Min. Cobalt Co 0.2 ppm Max. Lead Pb 0.2 ppm Max. Iron Fe 2 ppm Max. Aluminum Al 0.5 ppm Max. Manganese Mn 0.1 ppm Max. Nickel Ni 0.2 ppm Max. Antimony Sb 0.1 ppm Max. Arsenic AS 0.1 ppm Max. Silica Si 0.3 ppm Max. Bismuth Bi 0.1 ppm Max. Teleurium Te 0.05 ppm Max. Silver Ag 10 ppm Max. Selenium Se 0.3 ppm Max. Sulphur S 4 ppm Max. Magnesium Mg 0.4 ppm Max. Argent Ag 10 ppm Max. Zinc Zn 0.4 ppm Max. Oxygen O2 0
Ammonium sulfate.
high-fat, low-fat desiccatted coconut in fine grade, medium grade, shred, chip, flakes grade. Chemical specifications: Moisture content: 3 max oil ; oil content :65-69% free fatty acid : 0.1-0.15% as ol eic acid Peroxide value: n/a residual So2 50ppm or as required Microbiological specification. : Standard plate count: 5,000 cfu/g max , coli form count : 10cfu/g max, molds and yeast count 50cfu/g max, E. Coli: negative, salmonella: negative in 50g.
Rtv & htv silicone rubber, silicone hose, silicone composite tape.
