Metal abrasive
Here belowed is the scope of our products
Steel shot: s70 s110 s130 s170 s230 s280 s330 s390 s460 s550 s660 s780
Steel grit: g10 g12 g14 g16 g18 g25 g40 g50 g80 g120
Steel cut wire shot: 1.0mm 1.2mm, 1.5mm, 2.0mm
Stainless steel cut wire shot, 0.3mm, 0.4mm, 0.5mm, 1.6mm, 0.8mm, 1.0mm
Steel abrasives are used to clean a wide variety of surfaces and parts, for example
De-sanding and cleaning foundry castings
Descaling metal sheet, billets and profiles produced by the steel industry
Surface preparation prior to coating
Steel abrasives are used in the following industries and applications:
Foundries, metal producers, shot peening, surface preparation, general cleaning, granite cutting,
Chemical composition of the products:
C 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%.
Hardness:
Steel shot: 40-60hrc
Steel grit: 42-66hrc
Steel cut wire shot:1.0mm:51-53hrc ; 1.5mm:41-45hrc
Density:
Steel shot: 7.4g/cucm
Steel grit: 7.6g/cucm
Steel cut wire shot:7.8g/cucm
Microstructure: tempered marten site
High strength, long lasting ervin life: cast steel shot and grit: 2000 cycles;
Steel cut wire shot: 2800 cycles.
25kg in one bag, 40bags on one pallet, 20mt for each container
Metal abrasives Steel shot:s110, s170, s230, s280, s330, s390, s460, S550, s660, s780 Steel grit:g120, g80, g40, g40, g25, g20, g18, g16, g14, G12 25kg in plastic bag
Steel Shot is made of Chrome Alloy material which are fast atomized after melting.After heat treatment,it is featured with optimum mechanical characteristics,good tenacity,fatigue resisance,long woring-life,low consumption and so on.These made consumption save more than other suppliers' steel shot.
Cast Steel Grit Size: G10,G12, G14, G16, G18, G25, G40, G50, G80, G120 Chemistry Composition: C: 0.70-1.20% Mn: 0.60-1.20% Si: 0.40-1.20% S: 0.05%max P: 0.05%max Average degree of hardness: GP Steel Grit: 42-50HRC (399-509HV) GL Steel Grit: 56-60HRC (620-713HV) GH Steel Grit: 63-66HRC (795-889HV) Minimum density: 7.4g/cm3 25kgs/bag, 40bags/ton/pallet
Stainless steel cut shot - SUS302 / SUS304 / SUS430 - 0.3mm-3.0mm - 1000mts/month - 25kg/bag - Top quality and reasonable rates - Immediately delivery available - Customized production available 25kg/bag,40bags/sack/pallet
Taa low carbon bainite steel shot is a newly developed product after decade long efforts of taa technician group. This low carbon bainite steel shot has longer life and is competitively priced than martensite steel shot. Compared with the common low carbon steel shot from germany, taa low carbon bainite steel shot not only has good ductility, but also successfully overcome the low hardness weakness. Taa lcb abrasive could be applied to all the fields relating to shot blasting, sand blasting, blasting peening, etc, and its excellent performance could help end users greatly improve efficiency and save 50% of shot blasting cost. 25kg p.P. Bags, 40 bags per pallet
Taa is a professional manufacturer of metal abrasives in china. Our cast stainless steel shot is popular for cleaning and deburring aluminum products. It produces bright surfaces and is ideal for producing finishes free from ferrous residue. Our cast stainless steel shot is available with sus304 and sus430 in different sizes. 25kg p.P. Bags, 40 bags per pallet
Steel shot - S110-S930 - Hardness: 40-50 HRC; 50-60 HRC - Grade: Normal grade and special grade - 1000mts/month - 25kg/bag - Purpose: shot blasting, abrasive medias to remove dust from steel surface - Top quality and reasonable rates - Immediately delivery available - Customized production available 25kgs/bag,40bags/sack/pallet
Taa is a professional manufacturer of metal abrasive products in china with an annual production capacity of 150, 000mt. Our products mainly cover: Steel shot s110, s170, s230, s280, s330, s390, s460, s550, s660, s780 Steel grit g10, g12, g14, g16, g18, g25, g40, g50, g80, g120 Chilled iron grit Stainless steel shot Steel cut wire shot Stainless steel cut wire shot Aluminum/ copper/ zinc shot 25kg p.P.Bags, 40 bags per pallet
Product Standards: Our products have met international standard of SAE and have established the quality controlling system of ISO9000. Application:Aluminum shot is used for removing oxidation skin, burr, eliminating surface defect, removing stress, and etching, unknot, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus, and pump valve industry. Specificationú¦ 0.6~2.5mm Chemical Composition Al >= 99% Microhardness 45 to 50HV Tensile Intensity 80-240Mpa Durability:6500times Microstructure: Deformed Density: 2.7g/ cm3 Bulk Density:1.5g/ cm3 Packing Types: Braided bag packing: 25kg/bag,40 bags/pallet, flexible container packing:1000kg/bag, stock packing, paper bag packing:25kg/bag,40bags/pallet,with paper bag barrel packing:900kg/barrel.
