Glass blocks.
In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. Tempered glass constitutes flat glass, subjected special thermal treatment tempering, in result of witch in glass volume arise naturally distributed internal tensions, witch enlarge mechanical glass strength and provide special (safe) character of its destruction. Increase of mechanical strength (while bend can reach 250 mpa that is five times higher than in usual flat glass) stipulates increase of glass thermal resistance in 3-4 times (since 40 till 180 0c). Flat glass has thermal resistance by 40 0c, tempered glass by 180 0c, that prevents tempered glass from destruction while overheating and temperature difference. It is very important while using in external glass cover by toned and reflex glasses with absorption factor of thermal energy more than 25 %, when glass can get hot till 90 0c. In europe, lately, is widely spread the use of tempered glass with the purpose of safety, longevity and reliability. Bent tempered glass almost does not differ from tempered flat glass, the difference becomes apparent only on the final stage of the process. Glass after heating section comes to tempering section, where in a short period of time flat glass bends by the forming rollers. The forming rollers are usually set according to the radii models and forms. USE: Structural flat glass cover of buildings façades Shops and supermarkets windows Partitions in apartments and offices Glass doors Saunas doors (tempered glass stands perfectly heat strokes) Stairs and parapet fences Roofs, roof visors Winter gardens building Electric and gas ovens doors Escalators side supporting planes. Our company can offer: Tempering of clear float glass, thickness: from 4 till 19 mm Tempering of toned on the whole glass Tempering of reflex (sun protective) glass.
Orion-Glass Ltd produces glass that is widely used in the architecture and building. Architectural glass cover this is the opportunity to change the external building view by using modern technologies and materials. In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. During last ten years glazing became one of the most popular methods in modern architecture. In the architecture in glass industry is widely used a great spectrum of implantations - (structural glass cover, plate, toned and bent glass). Architectural glass is widely used in building for the external glass cover (buildings facades, shop windows, winter gardens, windows, doors, trading pavilions, bus stops and so on) and in internal building and construction decorating (office partitions, check-points, stairs fences, stained-glass windows, floors). Modern building market suggests façades glass cover by using aluminum profiles. Such constructions, due to its practicality, are very popular among those, who want to add attraction in the houses and in the offices using stylish and lone-lived façade. Architectural buildings surprise the spectator of the transparency and lightness of its constructions. But using of usual glass while building high constructions is not safe, that is why the architectures and builders use the products of the modern technologies - tempered glass. Due to its unique properties and rather high level of safety (in comparison with usual glass), tempered glass became more popular in different fields. For example, in modern building this material is successfully used while glass cover of the constructions of any difficulty including many-storied buildings facades, stairs fences, translucent roofs and floors; while balcony and loggia glass cover, bus stops, while producing of the shop windows and stained-glass windows. Today tempered glass became more and more popular in offices and public buildings. Tempered glass is used for producing of the counter reception, office partitions, counters for booklets and periodical. Using in building of the high-test tempered glass this is not only the tribute to the fashion and progress, but also the opportunity to save the balance between beauty and safety.
Exort:lass, reflective glass, sheet glass, figured glass and mirror Wooden packing
A very useful catalyst used for the glass coating system. 50kg drum
1) Available colors: dark blue, light blue, amber, light yellow, green, pink, purple, red and opaque blackú¼transparent black, gold champagne color new color. 2) Regularly stocked tubing size (diameter x wall thickness): Heavy wall tubing :( ten colors) 25 x 4mm, 32 x 3.2mm, 32 x 4mm, 38 x 3.2mm, 38 x 4mm, 44 x 4mm, 51 x 4mm, 51 x 4.8mm (standard length of tubingú¦1220mm) Light wall tubing :( amber, blue, green colors) 25x1.6mm, 30x2mm, 35x2mm, 40x2mm, 50x2mm, 55x2mm, 55x2.5mm, 60x2mm, 60x2.5mm, 70x2mm, 80x2mm, 85x2mm, 90x2mm, 100x2mm, 110x2.2mm, 120x2.5mm Inner profile tubing (amber, blue, green colors) 30x1.8mm, 35x1.8mm, 40x1.8mm, 45x1.8mm
The treatment process of tempered glass is as when heating glass close to molten point, to carry out even and rapid cooling treatment on the surface of glass, this enhancing the strength and thermal stability. The glass will break into cellular pieces when the external force exceeds its strength. It is hence a highly safety glass. Wooden crate.
Functions characteristics: Low-e insulating glass production line Automatic control function for low-e glass It is transmitted by a wheel, steadily and reliably Automatic adjust function for pressing with hydraulic compression Tilting table with hydraulic pressure Monitor using system temperature/speed/production volume Mechanical trouble cheek Whole line control function with 1monitor . Technique parameter: Max .Glass size 1800*2500mm Min .Glass size 300*500mm Glass thickness 3-50mm Thickness of washing glass up to 50mm Max.In washing section 12m/min Max.In accelerating 50m/min Brush 3pair(low-e) Power voltage 28kw(380v)/50-60hz Size of line 15600*2350*3000mm Power rate 20kw . 1 set 3500kg 15600*2350*2600mm.
Introduction : Apply water-proof shaft and bearing in the drying section Perfect low-e glass washing performance Adopt interval working design for saving energy Two pairs of brush Power: 3p 380v/1p 220v 32kw 50hz Technique parameter Max glass size: 2440*3000mm (1800 * 2440mm) Min glass size: 300 * 500mm Washing speed: 0-8m/min Glass thickness: 3-15mm. 9000*1800*3500mm 8000*1800*3000mm.
Functions characteristics : Shape glass LOW-E insulating glass production line Automatic control for LOW-E glass (2-brush treatment for LOW-E) Automatic adjust function for pressing with hydraulic compression Titling table with hydraulic pressure Monitor using system temperature/speed/production volume Mechanical trouble cheek Whole line control function with 1 monitor . Technique parameter : Max. glass size 2500*3500mm Min. glass size 300500mm Glass thickness 3-50mm Thickness of washing glass UP TO 60mm Max.in washing section 12m/min Max.in accelerating 50m/min Brush 4pair(LOW-E) Power voltage 3p 41.5kw(380V)/50-60Hz Size of line 25000*2560*3380mm Power rate 20.6KW . Wood case 7000kg 22000*1560*3380mm.
Features: Frequency:50HZ-60HZ Rated Current:60A Installation Wattage:40KW. Weight:2800KG Dimension:4200mm(L)*2200mm(W)*2250mm(H).
The 'db251d' glass straight-line beveling machine models have been designed and built to accurately grind and polish a bevel to the face of flat glass sheets and also smooth grind (pencil edge+) the remaining glass sheet edge. The beveling, polishing and edging functions are all be processed at one time. The five grinding and smoothing spindles are accurately adjusted as a group allowing fast and accurate changes in required bevel width. The two felt polishing wheels are positioned by manual. The edging diamond wheel is adjusted manually. The whole machines bed is adjusted electrically for angle changes, via a robust gear drive system. Technical data Min. Process size:120mm*120mm Max. Arris angle: 3p-30 Max. Bevel width:30mm Glass process thickness: 4mm-19mm Process speed: 0.73-3.65m/min Spindles: 8 Power·ª16.8kw Overall dimension: 7700*1300*2520(mm) Weight: 4050kgs
Des20 double edger is applicable for grinding straight edge of flat glass of different size and thickness. It can bevel the arris of the straight edge to angle of 45íp and it also can grind the four angles. The rough grinding, fine grinding , polishing for flat edge and arris beveling can be finished at one traveling. Continuous processing can be taken for glass of the same thickness. The shininess of the glass edge surface after being processed will be almost the same as the glass flat surface. 1.2 operation condition 1.2.1 power supply: ac380v+/-10% three phase 50hz+/-2% 1.2.2 ambient temperature: 1íµ~40íµ 1.2.3 r.H:
Ds1d shape edging/beveling machine applies to grinding and polishing for shaping peripheral and beveling edges of circular, ellipse and irregular flat glass, and also applies to semi-automatic grinding for circular and elliptical glass. Using different shaping grinding wheels can obtain the half- round, flat or og edges of glass. The grinding and polishing for bevel edges can be done by the means of adjusting angles of the grinding spindle and using the bowl-shaped grinding wheel Technical data. Working dimension:100mm-2100mm Bevel angle: 0-20 Max bevel width: 40mm Table rotating speed: 0.28-3.0 rpm Spindles: 1 Power:2.85kw Overall dimension: 1300*1100*1700(mm) Weight: 880kgs
Glass table drilling machine (two drilling head) is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping different drilling bits. The machine is good for batch processing. Working efficient is high. Technical data: Distance between drilling head and supporting column:1345mm Hole diameter:í=4mm-200mm Glass process thickness:3mm-19mm Power:4kw Dimention:2500*2200*1600mm
Features: 1). High light transmittance, excellent optical performance. 2). Smooth and flat surface, visible flaw is controlled strictly 3). Easily to be cutted, insulated, tempered and coated. Standard: comply with china gb11614-1999, europe en 572, and russia gost 111-2001. Specification: thickness: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm. Regular sizes: 1524x2134mm, 1220x1830mm, 1600x2400mm, 1830x2440mm, 1800x2600mm, 2134x3050mm, 2134x3300mm, 2134x3660mm, 2250*3210mm, 2250x3300mm 2250*3660mm etc.If your order quantity is more than 10000sqm, we can do according to your design size.
Features: Comparisons in light transmission: thickness clear float galssultra-clear glass 3mm 89% 92% 4 mm 88% 92% 5 mm 87% 91% 6 mm 85% 91% 8 mm 83% 91% 10 mm 82% 91% 12 mm 79% 91% 15 mm 77% 91% 19 mm 73% 90% Specification: Thickness: 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm. Regular sizes: 1524x2134mm, 1220x1830mm, 1600x2400mm, 1830x2440mm, 1800x2600mm, 2134x3050mm, 2134x3300mm, 2134x3660mm, 2250*3210mm, 2250x3300mmú2250*3660mm etc.If your order quantity is more than 10000sqm, we can do according to your design size.
Goden faith coloured float glass Is a heat-absorbing body-float glass product. It features proper heat-absorbing function, lower direct solar light transmittance with efficient energy conservation performance, providing modern architecture with a pleasant d¿ªcor performance. This product serves as an excellent substrate for coated glass Features: 1) the body float glass can reduce transmission of the sun's harmful rays by up to 85% thus minimizing fading to interior furnishings. 2) float colour glass can be bent, tempered or heat strengthened and in addition can be silk-screened or enameled. 3) the comprehensive range of soft natural colors compliments and harmonizes with modern building materials to provide an exciting and different look to new or existing buildings. Characteristics 1).Excellent optical performance. 2) stable chemical properties. 3) absorbing the heat energy of radiation light, saving energy Specification: 1)thickness:3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm, 12mm 2)colour: euro bronze, dark bronae, euro grey, dark grey, ocean blue, f-green, dark green 3)regular sizes: 1830x2440mm, 2134x3050mm, 2134x3300mm, 2134x3660mm, 2250*3210mm, 2250x3300mmú¼2250*3660mm etc.If your order quantity is more than 10000sqm, we can do according to your design size.
Features of coated glass are as follows: ò effectively restrain the radiation of the sun and the effect of sun shading is obvious. ò colourful reflecting hues and perfect decorative effect ò good screening function for indoor objects and building components. ò ideal visible light filtration ratio and reflection ratio. ò weaken the transmission of ultraviolet ray. Functions: The consecutive development of construction aesthetics proposes higher and higher demand for construction glass. It demands the glass has appropriate lighting function and good visual screening effect as well as energy saving and colorful decorative effect. Common transparent glass can 't meet these needs. In hot summer day, if you use transparent glass in your building and the strong thermal radiation enters the room almost freely, then the room surely will as hot as in fire. The coated glass solves the problem. Colors: There are silvery grey, bronze, blue, green, ocean blue, celadon, bluish grey, bluish green, gold, tawney and champers. Every color has different hues to meet the need of design. Thickness: Common thickness is 3, 4, 5, 6, 8mm Quality: Conform to business standard of jc693-1998 thermal reflecting glass and enterprise standard of q/snb009-99 thermal reflecting coated glass.
This robust machine is designed to provide a ground and polished finish to the flat edge on flat glass up to 28mm thickness. The 9 spindle ôDE342Aö is the ideal machine for flat polishing all glass types, which can flat grind and polish flat edges together with ground and polished 45¦ arrises. Operate and maintain. Production speed is controlled via a motorvariator from 1.0 to 5.0 meters/minute. Glass thickness is selected through a toggle switch linked to a servomotor and a digital display The arris wheels automatically adjust with each thickness selected. Each spindle has an associated ammeter enabling the operator to precisely regulate the degree of contact with the glass. The entry and exit conveyors are toothed belts and the entry conveyor is equipped with a precise and easy-to-use gear reduction box that enables the operator to lower or raise the height of the inlet conveyor belt. This is especially beneficial when controlling the amount of glass removal without having to adjust each spindle individually. The main conveyor is very robust with rubber covered nylon conveyor pads. The lubrication system is manual. All motors are supplied according to clientÆs request, transformers are not used. Technical data Min. Process size:120mm*120mm Max. Arris angle:45¦ Glass process thickness:3mm-28mm Process speed:1.0-5.0m/min Spindles:9 Power18.5kw Overall dimension:6900*1200*2520(mm) Weight:2750kgs
