Galv. Malleable Wire Rope Clip Din 1142
Material: Body with malleable cast, Heavy duty Type, U-BOLT with mild steel.
Finished: Galv.
Packing: Gunny Bags and then on pallets.
Minimum order quantity: 200pcs for one size.
Code:
DS-GMWC42
Size:
5-40mm
Material: Cast malleable steel.
Made by Cast.
Finished: Galv. self-color.
Packing: Gunny bags and then on pallets. (customer are available)
Feature: Made by Cast Steel.
Advantage: Price cheaper then forged Steel.
Benefit: General Using, widely. All commonly purpose
Brand:DAWSON/OEM
Code:DS-TMCT
Size:100-3000kg
High quality spare parts for Marzoli machines manufacture, importers and suppliers in India.
We use the most advanced technology and graded raw materials to manufacture the Textile Machinery Marzoli Spare Parts like Marzoli Rings, Peg etc.
We have been regularly supplying this "Marzoli Spare Parts" to many contractors and associated people in this Field across India.
We would request to you to please send to us your enquiries for the same so that we can send to you more details and our commercial offer for the same.
Machine Width With Doffer Max. 1420 mm
Ring Diameter 36 - 54 mm
Application Staple fibres up to 60 mm
Tube Length 180 - 260 mm
Spindle Gauge 70 - 75 mm
Twist Range 4,0 - 80 Tpi (160 - 3150 Tpm)
Material Cotton, man made fibres and blends
Yarn Count 3,0 - 150 Ne (Nm 5,0 - 250).
Ring Diameter 36 - 54 mm
Tube Length 180 - 260 mm
Spindle Gauge 70 - 75 mm
Maximum yarn quality in all working conditions
High drafts up to 80 fold.
Optimum spindle speed at every phase of bobbin build up thanks to an inverter drive.
Independent spindles, ring rail and drafting system drives.
Extremely reliable and fast doffing system with no trailing ends.
Simple and reliable transport peg system for either bobbins or tubes.
Ring frame stops to prevent production of defective yarn.
Flexible linking alternatives.
Bind the rope from the end at a distance equal to the loop desired, plus an additional length of about 10 times the diameter of the rope .split the rope by separating three adjacent strands, leaving the other three strands and core intact. Bend the large section(three strands core ) into the desired size loop and start laying the three separated strands in to the grooves of the bent section,as close to the throat as possible.
Completely lay the three strands around the loop as deep into the throat as possible. allowing the six strands ends and the core to project close to the throat of the loop.
In application of pressed-on ferrule is rolled in eye splice. Noticed how smooth the fabric is joined.
Position the special ferrule over the rolled in splice in preparation for swaging. Ends are still flats.
By administration of tremendous force by swaging machine, ferrule is tapered.
Wire Rope Press Grip Sling Are
Economical Safer And Easier To Work With
Three slings you can count on high strength efficiency on all eye splices.they are tapered and completely sealed with at both end to avoid snagging on loads. these ferrules completely cover all strands and locks them securely into place. there are no opening or rough projection to catch on hands. Rope slings with special pressed on metal ferrules are easier to work with.
Slings are made from 6x19 wire rope and from 6x37 wire rope. We recommended use of 6x19 construction. Upto 1 ¼ :6x37or large slings.
Note:
Standred sleeves are recommended for use with 6x19 or 6x37,IPS or EIF RRL,FC or IWRC wire rope.
Application for Grommat
Grommat slings can be fabricated in very short circumstances. The reason is this: Grommat slings are made from one continuous length of strand or wire rope. This requires only one tuck-in point as compared with six tuck-in points needed manufacturer an endless sling.
A Grommat consists of an endless rope having construction 6/1 construction & is used where high ultimate breaking strength of the rope is required beyond the limits of a single part rope.
A strand of sufficient length to complete the Grommat shall be obtained by either of the following methods:
Method A: An order strand shall be unlaid from a specimen of 6/1 rope conforming to the requirement of the customer.
Method B: Unlaying from a specimen of 6/4 rope having strands in all respects equipment to those obtained by method A above.
Method C: Using a virgin strand either prefromed or post formed & in all other respects equivalent to those obtained by method A & B.
During the course of construction of a Grommat the performed lay of the strand shall be maintained and shall not be interfered with except when laying in the core for which purpose length of strand left to form the core should be straightened .
The length of the strand required to form a Grommat shall be equal to about 7.5 times the parameter of the Grommat in case of spliced Grommat. But in case of complete streamline splicing length shall be 4 times the effective length.
Butt Splice
The two ends of the rope should be joined together by two five –tuck splices.
Number of Tucks
The splices shall be tucked three times the full size of strand, a fourth time with the strand each reduced to half the original number and a fifth with the strands each further reduced to one third the original number. The heart strand is to be rowed in during tucking so that a double heart is produced for at least the length of the first three tucks in both directions.
Method of Tucking
The Tucks of the Splice shall be made over one strand and under one strand against the lay of the rope. The heart strand of the rope shall not be removed when the strands are opened out for tucking, but may be cut to a suitable length.
Finishing
The ends of the splice in way of the twisted off ends of wire that is between the end and the third tuck shall be tightly served with seizing wire, after parcelling with canvas, Hessian or wax paper.
Flattening Test - Ferrules shall be pressed, along the major axis until the inner, surfecestmeet.
Multipurpose, Portable, Universal, Gearless, Hand, operated Pulling and Lifting machine, Supplied, complete with telescopic, operating handle and, standard Length of super flex steel fibre-mixed core, wire-rope fitted with Hook or Shackle at one end and, fused and tapered at the other end.
After completion of the test, there shall, be no visible crack on the ferrule.
All dimensions in millimetres., Note, For wire ropes of intermediate sizes, the next larger size of thimble shall be used., Dimension M is the standard pin hole and the largest pin-hole for each thimble. Should a, smaller pin-hole be required the diameter of this shall be stated in the enquiry and order.
Features
Basket is cast steel.
Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope.
Wedges are color coded for easy identification.
Blue - largest wire line size for socket.
Black - mid size wire line for socket.
7/16" on US4
9/16" on US5
Orange - smallest wire line size for socket.
Cast into each wedge is the model number of the socket and the wire line size for which the wedge is to be used.
Cast into each socket is the name "McKissick", "Crosby" or "CG", its model number and its wire line range.
By simply changing out the wedge, each socket can be utilized for various wire line sizes (Ensure correct wedge is used for wire rope size).
Load pin is forged and headed on one end.
US-422 wedge sockets contain a hammer pad (lip) to assist in proper securement of termination.
Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B20.26.
UWO-422 Wedges are to be used only with the
US-422 Wedge Socket Assemblies.
