Turnbuckle Malleable Commercial Type

Manufactured directly, with strict quality control to ensure consistent performance and cost efficiency.

Ultra-thin, high-purity graphene nanosheets designed for maximum thermal conductivity and electrical performance.

Perfect for batteries, polymer reinforcement, lubricants, and concrete applications.

Cyclone Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dustand other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust.
Multiple-cyclone separators consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure, and operate on the same principle as single cyclone separatorsâ??creating an outer downward vortex and an ascending inner vortex.

Multiple-cyclone separators remove more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiple-cyclone separators collectors is higher than that of single-cyclone separators, requiring more energy to clean the same amount of air. A single-chamber cyclone separator of the same volume is more economical, but doesn't remove as much dust.

Cyclone separators are found in all types of power and industrial applications, including pulp and paper plants, cement plants, steel mills, petroleum coke plants, metallurgical plants, saw mills and other kinds of facilities that process dust.

1. Commodity: Turnbuckle, US type, DIN type
2. Size: from 6mm to 100mm
3. Technology / Material : forged carbon steel
4. Safety factor: 4 times
5. Surface: self color, hot dip galvanized HDG, electro galvanized EG, powder coated color coated
6. Related: Wire ropes, thimbles, shackles, turnbuckles, chains, hooks, swivels, etc

1. Commodity: Malleable wire rope clip forged wire rope clip
2. Size: from 5mm-102mm, 3/16-4
3. Technology / Material : forged carbon steel, casting malleable steel
5. Surface: self color, hot dip galvanized HDG, electro galvanized EG, powder coated color coated
6. Related: Wire ropes, thimbles, shackles, turnbuckles, chains, hooks, swivels, etc

Genetron 245fa (R-245fa) is a hydrofluorocarbon (HFC) refrigerant used as a non-ozone-depleting replacement for R-11 in centrifugal chillers and other commercial applications. It is commonly used in organic Rankine cycles, commercial air conditioning, and commercial refrigeration.

Key Specifications:

ASHRAE Number: R-245fa

Brand: Genetron
Chemical Name: Pentafluoropropane

Formula: CF3CH2CHF2

Refrigerant Type: Single component fluid

Replaces: R-11

Substitutes: CFC-11

Typical Lubricants: Synthetic lubricants like PE and PVE.

Applications:

Commercial A/C: Cooling for large commercial buildings.

Commercial Refrigeration: Used in systems requiring efficient refrigerants.

Organic Rankine Cycle: Suitable for waste heat recovery systems.

Brand:
DAWSON/OEM
Code:
DS-HF0010-B3/16EE
Size:
3/16 - 1inch

Brand:
DAWSON/OEM
Code:
DS-3007
Size:
M5-M20

Brand:
DAWSON/OEM
Code:
DS-3001
Size:
M5-M20

Freon M059 R-417A Refrigerant Gas 25lb / 11.9 kg US Origin

Chemours ISCEON MO59 (R417A) is an HFC retrofit refrigerant that is cost-effective and ozone-friendly, used to retrofit equipment that uses R22, such as air conditioning (AC) and medium-temperature commercial refrigeration systems.

Applications:

Residential and commercial air conditioning systems.
Note: For water-cooled systems, MO29 is recommended.

Medium temperature refrigeration, commonly used in commercial units, including food service, supermarket display cases, and food storage/processing.
Benefits:

Efficient and cost-effective retrofits.
Ozone-friendly, does not harm the ozone layer.
In most cases, no need to change lubricant type during the retrofit process; compatible with traditional and new lubricants.
No need to replace existing equipment.
After the retrofit, MO59 can be topped off without needing to drain the refrigerant.
Advantages:

Lower discharge temperatures compared to R22, which can extend compressor life.
Provides the necessary cooling capacity in most systems.

Proven to save energy in some systems.
MO59 is an ozone-depleting substance (ODS) with zero ODP (Ozone Depletion Potential) and is not subject to phase-out under Montreal Protocol regulations.

Recommended lubricants:

Mineral Oil (MO), Alkylbenzene (AB), and Polyol Ester (POE) in most cases, no lubricant change is required during the retrofit process.