Copper millberry scrap lead batteries for recycling Liquid mercury Aluminium scrap
Johndeere T20249 Exhaust Manifold
10W SMD LED A60 BULB, 90lm/W 2 Years Warranty
Astra street light Suitable for residential car parks as well as main traffic routes
Fluorescent tubes
Enclosed fluorescent fitting Suitable for all commercial, industrial & domestic applications
Coach lantern
This DC to AC inverter is designed for the backlight of 6.4-15.1" LCD Panel with single CCFL lamp Input voltage: 12VDC Kick-off Voltage: min1500 Lamp Voltage: 500V Output Connector Mode: SM02B/ SM02 (8.0)*2 Transformer Qty: 2 Output Current: 6mA Output Voltage: 500V Frequency: 40 KHz Dimmer: Yes Dimension : 95.5mm*20mm*4.7mm.
tested used pressing iron for export from germany.
Used 4.5 MW Back Pressure Steam Turbine for sale; Year of Manufacture: 2005 Year Retired : 2012 Condiotion: Excillent Operating Hours: 17.092 Status:Installed on foundation Generator; Apparent Power: 5.625 kVA Active Power: 4500 kW Power Factor: 0.8 Speed: 1.500 rpm Frequency: 50 Hz Steam Turbine; Inlet Flow Most Economical: 2400 kW Inlet Pressure Rated: 44.5 Bar Inlet Temperature: 360 oC Rating Max. Cont.: 4700 kW Rated Speed: 10.043 rpm
Application: PEUGEOT EXPERT Tepee (VF3V_) 2.0 Hdi 07- FIAT SCUDO 2.0 D Multijet 07- CITROEN JUMPY 2.0 HDi 120 07- OE No. 6455.ES Packaging Size: 69,1x48,6x6,9cm Gross Weight: 3,2kg
Energy saving light only 62x46x32cm 16kg (100pcs pack)
Description of building system: Building costs of typical individual house is about 40% cheaper than another popular in eu systems; Small costs of investment, production and working power the execution of buildings in system r; Costs of air conditioning for typical house is about 5 times cheaper than another popular in eu systems; Costs of heating for typical house is about 5 times cheaper than another popular in eu building systems; System r possesses indispensable certificates and it fulfils all valid in eu building norms: - stamina norms - resistance on moisture - protecting before noise - protecting before fire - hygienic norms - norm of waste of energy - large range of recycling Coefficient of heat infiltration “u” for 30 cm of wall is ca. U = 0, 20 w/m2k and can be more reduced easily yet; Heat energy consumption for typical individual house is ca. 42, 50 kwh/m2 and can be more reduced easily yet; System consists from 17 basic building elements; Lateral surface of one typical structural element: 0, 18 m2 Consumption structural typical elements per unit: 5, 5 elements/m2 The joining the elements follows of thin-layer plaster glue. Basic materials to production small block in system r: - plaster - water - expanded polystyrene, eps
The Y3 Iperespresso coffee is a beautiful amalgamation of the unique quality of Illy coffee with compact and simplistic design. The Y3 espresso machine is functional, small and easy to use. A capsule and a touch of a touch- icon of your choice. This machine is the ideal product for hotels, restaurants and bars, due to its small sizes. Y3 has two heads support that lets you choose the size and height of your cup . Ideal for all coffee lovers. During the preparation of coffee and machine never come in contact with each other . As a result, the machine remains clean and maintenance and cleaning are reduced to a minimum.
The Y5 Iper Espresso is designed compact , elegant and very smart. The housing consists of aluminum and tempered glass.
The unmistakable design is reminiscent of the actions of the barista and espresso that you make at home is just like those in the bar with a constant and perfect extraction quality : you do the capsule in the filter holder and put the issue on with one button press . That is iperEspresso . With soft-touch buttons. He has a steam pipe for cappuccino : the wait time between switching from coffee to cappuccino function is minimal
r control is designed to Optimize the charging cycles for any type of battery, 230v coil single-pole contactor, D.C. Fuse on rectifier output, delta-star stray flux single-phase power transformer Class h; impregnated in autoclave with ecological epoxy resins, with thermocouples For disconnection due to maximum temperature, single-phase rectifier bridge with Silicon diodes, natural cooling, with snubber protection, mains input and d.C. Output Polarized cables, modular installation on galvanized steel base, sheet steel case with Modular panels so as to assure maximum accessibility in case of service, epoxy Powder coating, oven-baked, standard colour: ral 2002 red, new lexan plate with Charging data very easy to understand, equalized recall push button, on - off push Button, option to adjust the charging time from 90 to 210 minutes, option to adjust The threshold voltage from 2.3 to 2.4 v/cell., equalization charge timed, led signaling Charging phases or result, short check of functions and times, option to program The equalized charge automatically, lab-tested electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, option: custom-made color, logo and Silk-screen printing, option: assembly of plugs and battery connectors on request.
Icroprocessor control is Designed to optimize the charging cycles for any type of battery, single mains input Fuses, auxiliary transformer suitable for the supply voltage, d.C. Fuse on rectifier output, Delta-star stray flux single-phase power transformer, tenvex copper windings with Double enamel insulation; class h; impregnated in autoclave with ecological epoxy Resins, with thermocouples for disconnection due to maximum temperature, singlephase Rectifier bridge with silicon diodes, natural cooling, with snubber protection, Mains input and d.C. Output polarized cables, modular installation on galvanized Steel base (type a: 20/10, type b :30/10), sheet steel case with modular panels So as to assure maximum accessibility in case of service (type a : 10/10 - 12/10, Type b : 12/10 – 15/10), epoxy powder coating, oven-baked, standard color: ral 2002 red, lab-tested electronic circuit conforming to the directive on electromagnetic Compatibility and ce marking, equalization charge timed, automatic start, automatic Disconnection of battery charger due to battery disconnection, smart charging system According to the discharge level of the battery, short check of functions and times, Option: custom-made colour and custom-made logo and silk-screen printing, final Acceptance test conforming to safety regulations, charging with decreasing current (wa characteristic): 9÷11 h charging time, charging with decreasing current (wo - Wa characteristic): 7÷8 h charging time, complete with mains and battery cables; Assembly of plugs and battery connectors on request.
Ptek nre3 three phase is designed to recharge medium - large capacity traction And start lead-acid batteries, developed using our forty-year experience in the field Of battery chargers and multi-years application of microprocessor control systems D electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, equalization charge based on Time, charging with decreasing current (wa characteristic):9÷11 h charging time, Transformer thermal protection, modular installation on galvanized steel base, sheet Steel case with modular panels, epoxy powder coating, oven-baked, standard color: Ral 5003 blue, option: custom-made color, logo and silk-screen printing, mains Input and d.C. Output polarized cables, complete with mains and battery cables; Assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge). It will start after 55’ from charge end, Duration of equalized charging phase: each hour 5’ (repeated for 48 Hours), calculation to determine the size of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek tc3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of , three-phase rectifier Bridge with silicon diodes, natural cooling, with snubber protection, mains input and D.C. Output polarized cables, modular installation on galvanized steel base, sheet Steel case with modular panels so as to assure maximum accessibility in case of Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new Lexan plate with charging data very easy to understand, equalized recall push Button, on - off push button, option to adjust the charging time from 90 to 210 Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization Charge timed, led signaling charging phases or result, short check of functions and Times, option to program the equalized charge automatically, lab-tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, option: Custom-made color, logo and silk-screen printing, option: assembly of plugs and Battery connectors on request. Charge at decreasing current with intervention of the final charge At 2.40 v/cell, final charge with timed control 9h / 11h, fixed Charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ From charge end, duration of equalized charging phase: each Hour 5’ (repeated for 48 hours), calculation to determine the size Of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
