We are very much interested in buying TG sets along with the following accessories:
a). Turbine (preferably speed 3000 RPM)
b). Inlet steam pressure (40kg / sq cm)
c). Gauge Steam temperature 425 degree celcius (+/- 10)jd
d). Exhaust pressure fully condensing (29.5 each of Hg vaccum)
e). Condesor suitable for sea water
f). Condensor must have facility of online cleaning
g). Condensor vaccum system should be vaccum pumped operated or system ejector complete with condensing unit
h). Turbine should have one main oil pump (turbine shaft driven pump)
i). Steam driven oil pump
j). PC battery oil pump.
Tablet pc charger 12v1.5a 18w for acer iconia w3 a510 a700 a701
Technical specification:
Condition:100% brand new
Input: 100 to 240v ac, 50 to 60hz
Protection: over-current, voltage and auto recovery
Output protection: over-load and short-circuit protection
Ac inlet: plug-in type
Insulation strength: class a
Operating temprature: -10¡ãc~+40¡ãc (10-90%r.H)
Storage temprature: -40¡ãc~+60¡ãc (10-90%r.H)
Operating humidity: 10% ~ 90% rh non-condensing
Storage humidity: 5% ~ 95% rh non-condensing
Case materials: pc, abs, or equivalent
Packing details:1 piece per plastic bag + inner box (negotiate when order)
Product characteristic:
1) over ten years of professional experience in design and producing laptop adpters.
2) strong r&d capability, all kinds of products available.
3) abundant inventory for fast delivery.
4)pass ccc, fcc, ce certificates. Reliable quality
Power1, 2(+);3, 6(-) (endspan)
Data1, 2-tx; 3, 6-rx
Power supply modedetect pd, then power support
Otherselectromagnetic compatibility ce class b/fcc part15, class b/vcci class b/c-tick
Safety normsce/lvd
Operating temperature0¡ã¡a40¡æ
Operating humidity10%-90%, non-condensing
Physical
Features Universal AC input / Full range
AC input active surge current limiting
Built-in active PFC function, PF>0.95
Protections:Short circuit/Over load/Over voltage/Over temperature
Built-in constant current limiting circuit
Current sharing up to 2 units or 2000W
Built-in remote ON-OFF control
Built-in remote sense function
SpecificationOver Load Protection 115~140% of rate load. Protection type : Constant current limiting, recovers automatically after fau
Over voltage protection type : Shunt down o/p voltage, re-power on to recover.
Over temperature TSW1: 95?C (Detect on the heatsink of PFC MOSFET) TSW2: 90?C (Detect the winding of output choke)
Protection type : Shun down o/p voltage, recovers automatically after temperature goes down
Remote control RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current <20mA
Working temp., humidity -10~+65?C (Refer to output load derating curve), 20~90% RH non-condensing
Storage temp., humidity 20~+85?C , 10~95% RH
Temp. Coefficient ?0.03%/?c (0~50?c)
Vibration 10~500hz, 2g 10min./1cycle, 60min. Each along x, y, z axes
Safety standards ul1950, tuv en60950 approved
Emi conduction & radiation compliance to en55022 (cispr22) class b
Harmonic current compliance to en61000-3-2, -3, class a
Ems immunity compliance to en61000-4-2, 3, 4, 5, 6, 8, 11; env50204, light industry level, criteria a
Withstand voltage i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac
Isolation resistance i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc
MTBF 59.6K hrs min. MIL-HDBK-217F (25 ?C)
Input Voltage 90 ~ 264VAC 127 ~ 370VDC
Input Frequency 47 ~ 63Hz
Power Factor 0.95/230VAC 0.95/115VAC at full load
AC Current 11.2A/115AVC 5.6A/230VAC
Inrush Current 32A/115VAC 63A/230VAC
Leakage Current <2mA / 240VAC
Setup, Rise Time 1500mS, 50mS/230VAC 1500mS, 50mS/115VAC at full load
Hold Time 24mS/230VAC 24mS/115VAC at full load
Seagull series
Products model sb05s-n sb05s-c sb10s Sb10l
Capacity 500va/300w1000va/600w
Input voltage220vac +22% -30%
Frequency50hz+10%
Inputelectrical supply stateStabilize automaticallyYes
Voltage220vac+10%when electrical supple is +20%
WaveformPure sine wave
Output(invert state voltage 220vac+3%
Frequency50hz+0.5%
WaveformSimulated sine wave
Switch time< 2ms
Dc startYes
Battery type lead-acid without maintenance battery
Specification7ah/12vdc connect if longtime model
Sections 1 set2 sets
Nominal voltage12vdc24vdc
Charge timeThe capacity reach up to 90% in 4 hours
Back-up time10 ~ 30 minutes long time model is different
Automatic diagnosisCold startYes
Software control+Yes
Display functionLed displayUps performance state, battery state, fault state
Protection functionOverload> 110%
Short-circuitInput fuseelectrical supply+circuit protection automaticallyinvert
Noise controlEmi/rfi filter
Low voltage batteryClose down protection
Modem+ Two rj11
Warm installationSound and light warmelectrical supply fault, low voltage battery, overload, ups fault
Mute+Control by software
Physical parameter Sizew-d-h105-350-155 mm110-367-185 mm
Weight6 kg6kg13 kg12 kg
UsingenvironmentTemperature0 ~ 40¦
Moisture< 95% without condensing
Computer interfaceInterface type+diagram interface: real rs-232 communication
FunctionUps and electric power state, electric power failure, low battery voltage, telecontrolclosing down, control menu
Operation system compatibility+windows95=windows98=windows2000=windowsnt
Qualified standard
Remarks: the s in sb-series model stands for standard model, l stands for long-time model.
+stands for without this function. If there is any amendment of parameter, we won+t inform you.
This type CT is designed for easyinstallation in tight spaces and environment without removing the main busbaror cable .The connector uses the holding pressure of folding structure. Safetyisolation to protect the user from direct contact with the electrifiedbody.Meet the 600V,CATIII secure degree.
Features:
.Flexibleand light weights,exquisite appearance
.Easily&quick installation in tight spaces
.Excellentlinearity
.Maximummeasuring current up to 550A
Applications:
.Power quality monitoring
.Smart logger
.Distributed measurement systems
Mechanical Dimension:
462.png
Technical index:
Item
Parameter
Rated Primary
500A AC
Output voltage
1Mv AC/A
Amplitude Accuracy
±0.3%rdg. ±0.01%f.s.(f.s:500A,45Hz-66Hz,primary conductor in the center)
Phase Accuracy
±0.5º(10-100%IIn )(45Hz-5kHz)
The Amplitude Frequency Characteristic
±1%(45Hz-5kHz)(Deviation Accuracy)
Conductor Impact
±0.5%(off-center)
The influence of external electromagnetic fields
=0.1A(In AC 400A/m electromagnetic fields)
Maximum input current
550A AC Continuous (45-66Hz,Ambient temperature50º C
Temperature Coefficient
0.02%reading data /º C
Dielectirc strength
5312V ACrms/continue15seconds(circuits-iron core)
The Maximum rated voltage
600V crms
Operating temperature &humidity
0 to 50º (32-122º F), =80%RH(NO condensate)
Storage temperature &humidity
-10º C to60º C(14-140º F), =80%RH(NO condense)
Indoors operating environment ,UP to 2000m above sea level
Applicable Standards
Safety:EN 61010-2-032:2002,CATIII ,Contamination II
EMC:EN 1326:1997+A1:1998+A2:2001+A3:2003(classA)
Measurable conductor diameter
=Ø46mm
Cable Length
About3M
Dimension
About 79W*159H*40Dmm (Excluding Protruding parts)
Weight
About 380G
GGD Type AC Low Voltage Distribution Cabinet
GGD type AC low voltage distribution cabinet
Product Introduction
Introduction and usage
GGD type AC low voltage distribution cabinet is suitable for power plants, substations,factories,mine enterprises whose distribution system is with 50HZ AC,to 3150A rated working current, used for power change,distribution and control of power, lighting and power distribution equipments.
GGD AC low voltage distribution cabinet is a kind of new type low-voltage distribution cabinet, designed based on the requirements of the Department of Energy in charge  of the higher level, the majority of electricity users and design department, and with principles of safe, economic, rational and reliable. It is with these characteristics of high breaking capacity, good dynamic thermal stability, flexible electrical program, convenient combination methods, series, practical, novel structure, high level of protection, can be treated as a replacement product of low voltage switchgear assemblies.
GGD type AC low voltage distribution cabinet meets the standard of IEC43Low-voltage switchgear and control gear, GB7251Low-voltage switchgear assembliesOperational conditions
1, surrounding air temperature not more than +40°C, not less than -5°C, average temperature over 24hs cannot more than +35°C
2, installed in indoor, altitude not higher than 2000m
3, surrounding air relative humidity at the highest temperature of + 40 not more than 50%, at a lower temperature allows a greater relatively humidity( for example, temperature is + 20 , humidity can be 90%), should consider the influence of condensation caused occasionally due to the temperature change.
4,the inclination between cabinet and vertical plane not exceed 5%
5, cabinet need be installed in the place without severe vibration and shock and where is insufficient to corrode electrical components.
6,users can consult with manufacturers if have special request.
EAN
Product code: PSQ511
Trade name: PSQ511. Wall-mounted / floor plate type AC 400V, 16A, 11KW household type 2 electric vehicle smart charger
Input the wiring scheme: L1 + L2 + L3 + N + PE
Input rated voltage: AC 400V
Input the rated current: 16A
Input frequency: 50 / 60Hz
Output voltage: AC 400Vâ?
Output current: 16A
Rated power: 11KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Commodity color:
EAN
Product code: PSQ522
Trade name: PSQ522. Wall-mounted / floor plate type AC 400V, 32A, 22KW household type 2 electric vehicle intelligent charger
Input the wiring scheme: L1 + L2 + L3 + N + PE
Input rated voltage: AC 400V
Input the rated current: 32A
Input frequency: 50 / 60Hz
Output voltage: AC 400V
Output current: 32A
Rated power: 22KW
Operating temperature: -30 C + 50 C
Storage temperature: -40 + 80
Working humidity: 5% 98% no coagulation cream, no condensation
RCD A+DC6mA
Cable connectors: SAE J1772, EC61851-1, IEC 62196-2
Connector type: NEMA 5-15 / 6-20 / 6-30 / 6-50 / 10-30 / 10-50 / 14-30 / 14-50 / EU Plug / UK Plug / CEE Plug
Support communication: APP, 4G, RJ 45, Bluetooth / wifi
Start mode: plug and play.(Support for optional password, fingerprint, swipe card, QR code)
Connector mechanical working life: 10,000 times
Emergency stop: Standard configuration OK
Key surface indicator: green / blue / red (blue-standby; green-charging gun connected to the car, flashing for charging; red-abnormal)
Cable length: 5m standard in Europe and 7.60m standard in America. Support to buy 10m, 15m
Quality assurance: 12 months
Waterproof grade: IP65
Impact protection: IK 10
Noise control: 60 dB
Product certification: 3C, CE, ROHS, REACH
Commodity color:
