Fiber laser with 20 w power Marking area : 100 x 100 mm ; 200 x 200 mm Longer laser source life No consumables cost Lower electrical consumption Lower maintenance cost Compact & user friendly
10 w to 100 w fiber & yag laser marking system with various sizes of work station, rotary attachment & special purpose automation
1.Introduction The new generation of laser scribing machine YMS-50 (CE certificated product) is capable of scribing various silicon wafer, solar cell, ceramic wafer, thin metal sheet (~0.5 mm thick maximum), etc., in industries of electronics, semiconductor and solar energy, etc.. It is designed by experts with professional features, such as excellent beam quality and power stability, precise CNC worktable and efficient auto cooling system. Some of the most important parts are manufactured in UK, USA and Germany. Thanks to the automatic control of the whole system, you can save more efforts on the manufacturing, instead of how to operate and maintain the system. 2. Features Excellent beam quality and system reliability High-speed scribing (up to 120 mm/s), very low-defective index Auto cooling system Precise CNC worktable Friendly man-machine interface and simple software operation 3. Technical Parameters Laser medium Nd3+:YAG Wavelength 1064 nm Pump source Kr lamp Laser cavity Ceramic Modulated frequency 0.5 - 50 kHz Beam power Adjustable, max 50 W Aiming laser Red Scribing speed Adjustable, max 120 mm/ s Scribing depth Max 1.2mm Line width Min 0.2mm Worktable repeating accuracy 0.01mm Marking area 300 mm í- 300 mm Power supply 3-phase 4-wire AC 380V í+ 10%,50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation) Input power Max 5kW Dimension 550 mm x 290 mm x 650 mm Net weight ~560 kg Cooling Mode Water cooling 4.Standard Configuration Laser machine í- 1 set Exhauster í- 1 set Vacuum pump í- 1 set Cooling unit (Chiller, temperature controller, water tank, filter) í- 1 set Worktable unit (CNC controller) í- 1 set Kr lamp í- 2 pieces Laser detector í- 1 piece PC í- 1 set Scribing software (In English) í- 1 set Operation manual (In English) í- 1 Wooden Case
1.Introduction The laser scribing machine is specially designed for insulation of a-si (amorphous silicon) and back contacts such as aluminum coating of the a-si thin-film solar cell, without any damage to tco (transparent conductive oxidization) coating. 2. Features Cnc worktable size: 900mm íß 1600mm High-speed up to 500 mm/s or 200 íß 4 Auto programming / cooling / on-off Kerfs width 0.05 ¿c 0.15 mm, continuously adjustable 3. Technical parameters Wavelength 532 nm Laser output stability ín ía 3% Beam expanded angle ín 8 mrad Scribing speed Continuously adjustable, max 250mm/s Kerf width Continuously adjustable, 0.05 - 0.15 mm Scribing area 900 mm íß 1600 mm Power supply Single-phase ac 220v ía 10%, 50 hz /60 hz, pe, (a voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation) Input power Max 1500w Cooling mode Air cooling 4.Standard configuration Laser machine íß 1 set Worktable unit (cnc controller) íß 1 set Pc íß 1 set Scribing software (in english) íß 1 set Operation manual (in english) íß 1. Wooden case
1.Introduction The laser scribing machine is specially designed for insulation of a-si (amorphous silicon) and back contacts such as aluminum coating of the a-si thin-film solar cell, without any damage to tco (transparent conductive oxidization) coating. 2. Features Laser: lamp-pumping laser Cnc worktable size: 500mm íß 500mm High-speed up to250 mm/s Auto programming / cooling / on-off Kerfs width 0.05-0.15 mm, continuously adjustable 3. Technical parameters Wavelength 532 nm Pump source Kr lamp Laser output stability ín ía 3% Beam expanded angle ín 8 mrad Scribing speed Continuously adjustable, max 250mm/s Kerf width Continuously adjustable, 0.05 ~ 0.15 mm Scribing area 500 mm íß 500 mm Power supply 3-phase 4-wire ac 380v ía 10%, 50 hz /60 hz, pe, (a voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation) Input power Max 5kw Cooling mode Water cooling 4.Standard configuration Laser machine íß 1 set Exhauster íß 1 set Vacuum pump íß 1 set Cooling unit (chiller, temperature controller, water tank, filter) íß 1 set Worktable unit (cnc controller) íß 1 set Kr lamp íß 2 pieces Laser detector íß 1 piece Wooden case
1.Introduction The new generation of laser marking machine YMM-50 is applicable to almost any material surface. It offers various advantages with comparison to the traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free(Tools wear in stamping systems). Laser marking technique offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any material surface. 2. Features Friendly and ergonomical man-machine interface Stable, precise and high-speed system File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.; Embedded test and graphic design tools offer various editing features Auto-numbering Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, etc. and serial numbers Auto cooling Flexible text / graphics marking; Line or arc scribing to enable flexible profile scribing (Complicated profile scribing is optional) 3. Technical Parameters Wavelength 1064 nm Pump source Kr lamp Laser cavity Ceramic Laser output stability í_ í+ 3% Beam expanded angle í_ 8 mrad Aiming laser Red Linear speed Adjustable, max 5000 mm/ s Line width Min 0.1mm Letter size Min 0.5mm Marking area F=160 mm 70 mm í- 70 mm F=220 mm 100 mm í- 100 mm F=250 mm 150 mm í-150 mm Power supply Single-phase AC 220 V í+ 10%, 50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation) Input power Max 7kW Dimension 1500 mm x 500 mm x 1200 mm Net weight ~180 kg Cooling Mode Water cooling 4.Standard Configuration Laser machine í- 1 set PC í- 1 set Marking software (In English) í- 1 set Operation manual (In English) í- 1 Wooden Case
1.Introduction The laser marking machine YMM-10C is applicable to almost any non-metal surface. It has many clear advantages with comparison to traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free (Tools wear in stamping systems). Laser marking offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any surface. 2. Features Unique optics design Friendly and ergonomical man-machine interface Stable, precise and high-speed File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.. Embedded test and graphic design tools offers various editing features Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, Data Matrix, QR Code, etc. , and serial numbers 3. Technical Parameters Wavelength 1064 nm Aiming laser Red Linear speed Adjustable, max 5000 mm/ s Line width Min 0.2 mm Letter size Min 0.8 mm Marking area F=160 mm 70 mm í- 70 mm F=220 mm 100 mm í- 100 mm F=250 mm 150 mm í-150 mm Power supply Single-phase AC 220 V í+ 10%, 50 Hz / 60Hz Input power Max 210W Dimension 550 mm x 290 mm x 650 mm Net weight ~33.75 kg Cooling Mode Air cooling 4.Standard Configuration Laser machine í- 1 set PC í- 1 set Marking software (In English) í- 1 set Operation manual (In English) í- 1 Wooden Case
Sell tunable laser source of agilent 8164a, agilent 8168f, agilent 81689a, agilent 81640a, ando aq4320.
Laser power: 70w. Cutting size: 700mmx500mm. 1450x1000x1100mm.
Two cutting head Laser power:70x2w Cutting size:1200mmx600mm . 1820x1220x1150mm.
With cameral, Laser power:85w, Cutting size: 850mmx600mm . 2200x1160x1320mm(lxwxh).
Laser power: 70w Cutting size: 1000x800mm. 1580x1210x1110mm.
Digital camera
32 inch or 42 inch HD-ready or full HD.
Products Characteristics 1.Advanced stepper control system with high precision and stalbe work function,support work on/off line. 2.Integrated design adopt the framework structure,stable and reliable,low noise. 3.Imported linear rail, advanced high-speed motor and driver, carving fast and higher precision. 4.High stability laser tube,imported lens and reflected mirror,infrared positon system ensure the cutting precision is high,incision is smooth. 5.Power off memory and breakpoint continuous carving function avoid wasting materials. 6.Laser Cut 5 software the latest support graphic format form the Auto CAD,Corel Drow,Photoshop and so on. 7.Multifarious work table such as honeycomb work table,aluminous strip work table and aluminous plate work table for choose, up-down device, rotary device optional. Technical Parameters We can supply different kinds of this machine:SF960,SF 1290,SF1410 and so on. 1.Model: SF 960 2.Work area:900X600mm 3.Laser power: 60W(option 80íó100íó130íó150W) 4.Laser type:Co2 sealed glass laser tube 5.Engraving speed:1-50000mm/min 6.Cuttting speed:1-30000mm/min 7.Minimum shapping character:Chinese character2x2mm,letter1x1mm 8.Maximal scanning precision:3000dpi 9.Location precision:
Tem no.ú¦mov196 Sizeú¦110mm*63mm*28mm Weightú¦200g Tem no.ú¦mov196 Sizeú¦110mm*63mm*28mm Weightú¦200g
Camera.
Digital camera.
Ideal for exporters - can be used as spairs and repairs. Come in between 32ich to 50 sizes mix Sold only in contaner loads. Container or loarry load only.
Spectral range 8½14ª8m Pixels320ß240 Image frequency25hz Field of view 14pß10p optical(optional) 7pß5p optical 3.5pß2.5p(optional) Netd¬é50mk Field of view and focusing mode electronically controlled Image presentation Image colourb & w, b & w inverse (pseudo color optional) Integrated displaycrt view finder Video outputpal Environmental specification Operating temperature- 40 ½ + 60 Storage temperature- 45 ½ + 65 Humidityn95% Detection range Recognization range1.7m people ²2.5km 1.7m people²1.2km 215ß118ß130mm.2000g
