We can also provide the following products: Burkert flow transmitter Gf signet flow transmitter Foxboro flow transmitter Yokogawa flow transmitter Honeywell flow transmitter Coriolis flow transmitter Rosemount flow transmitter Siemens flow transmitter
•Slim pen-style design has handy belt clip •Easy to handle and simple to store •Easy-to-read LCD displays clear reading in seconds kelilong ph meter is specially designed for high accuracy and ruggedness. It's excellent features are best suited for industries, laboratories and swimming pool, where accuracy is of utmost importance. The tester is equipped with Automatic Temperature Compensation (ATC) to make accurate calibrations, which enhances accuracy in subsequent tests.
•Compact construction •Easy operation •On-the-spot measurement •Easy to carry Model 009(II) pen-type pH meter uses combined pH electrode of high sensitivity, fast response, and good repetition as probe. With large liquid crystal digits display, the meter is reliable, stable, portable, and convenient to operate, especially for field measuring. It is praised by home and aboard. This product has been exported in batches. It is applicable to determine pH value of water solution in departments of medical treatment, environment protection, scientific research, college, swimming pool and mechanical plant etc.
•Hold Function Able to freeze display for ease of reading and recording. •Low battery alert Function The meter is supplied with BEPS (Battery Error Preventing System) which avoids any erroneous reading due to low battery level, by switching the meter off. •LCD with backlit Function Easy reading in a dark environmental •Ruggedness Its ruggedness is unmatched by any similar pocket size tester. The uniquely re-enforced glass sensor can withstand accidental drop and shocks. The KELILONG pH tester is specially designed for industrial applications uncomparable by others. Its ruggedness surpasses any cheap pH meters. It is splash proof and it floats on water. Its portability makes it the most convenient and reliable test for technician to perform onsite water checking and testing.
KL-061 ph meter is a great hand held pH meter with a large easy to read display, simple operation and easy features. Suitable for many different applications. it makes testing pH easy. The meter is light weight and will fit in your pocket, or you can use the handy clip on the back of the meter to attach it to your clothing.
•Waterproof and designed to float (IP56) •Easy to use •Economical The PH-037 is an advanced handheld,Housed in a floating waterproof case. It can be used for testing the acidity or alkaline levels of almost any liquid, in a wide variety of applications.
•Waterproof and designed to float •Automatic Temperature Compensation •One button operation - just switch on and test •Lightweight and easy to handle pen style tester •Simple to self-calibrate •Replaceable probe kelilong ph meter is specially designed for high accuracy and ruggedness. It's excellent features are best suited for industries, laboratories and swimming pool, where accuracy is of utmost importance. The tester is equipped with Automatic Temperature Compensation (ATC) to make accurate calibrations, which enhances accuracy in subsequent tests.
Model: cac(5) Light sources:d65, cwf, tl84, uv, f Voltage:220v/50hz or 115v/60hz Dimensions:712x405x570mm Cavity:680wx380dx360h G.W.:30kg D65 --- international-standard artificial daylight Color temperature:6500k power:20w Tl84 --- applicable to stores in europe, japan and china Color temperature:4000k power:18w Cwf (cool white fluorescent) Color temperature:4150k power:20w F-light ---- comparison referential light source, applicable to family/hotel Color temperature:2700k power:40w Uv ---- ultraviolet light source Wavelength:365nm power:20w Features: > time running display of each light source. > auto conversion between light sources; different spectrum with same color. > no need warm-up; no flicker; color assessment quick and reliable. > low power-consumption; no heat emission; efficient illumination. > small and convenient. > low price with high quality assurance. Various types available! Standard packaging
Weight Measurement Function: By Hours, minutes and seconds unit, Display the status of the usage of liquid gas and it can be used being installed on storage tank or tank lorry and can be carried as a portable measuring instrument. PC Monitoring Function: As the remained liquid goes below 10% of its capacity, it automatically alarms to supplement liquid gas. Thus, the appropriate time for supplement of liquid gas can be decided on time. Alarm Function: the liquid remaining of the storage tank is less than 10%, The alarm sound provides information that you can setting the a liquid supply time. Diversity Of Power Supply: Use the usual 220volt electric, in case of power outage, the built-in battery will supply the charged electricity, in addition built-in battery is operated and available for tank lorry using the car battery. Option (Printer : additional purchase): Receipt Output Function; Portable thermal transfer printer can use the output value measuring of storage tank and tank lorry without visiting a long measuring place directly by the output as a receipt.
Residential Diaphragm Gas Meter ITRON (MID approved) Steel Version Basic Features 3 Compact size: 1.2 dm cyclic volume Range: G1.6, G2.5, G4 EN 1359 & O.I.M.L compliance Design Long -term accuracy & safety Ready for remote reading & data management Quality World-class, ISO9001 certified, European Engineering and Manufacturing APPLICATION The ITRON, with an installed base of over 30 million units, is a versatile meter that makes it the preferred choice of many large utilities world-wide. METROLOGY The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by the LNE), and more than 25 national metrological standards (DVGW,NMI Class 1....). Its design and the careful choice of materials enable the ITRON to meet the highest demand in international markets in terms of accuracy and long-term stability. During the preliminary test controls on the sonic nozzle test benches, all meters are tested at Qmin, 0.2 Qmax and Qmax. OPERATING PRINCIPLE The ITRON is a positive displacement diaphragm gas meter with a stand-alone twin chamber measuring unit. The twin chambers are each fitted with a flexible and gas-tight diaphragm which is moved by the differential between the inlet and outlet pressure. The Gas enters one side of the diaphragm pan while on the other side it comes out through a separate port on the valve. When one side is full, the rotating mono-valve moves on to the next position, allowing the gas to fill the empty side. A transmission gear and a mechanical coupling or stuffing box transfer the reciprocating motion to the mechanical retrofitable index. The measuring unit is housed in a robust gas-tight casing. CONSTRUCTION With its casing in steel, high protection against corrosion is ensured by 500 hours salt fog spray test resistant cataphoresis treatment. The aluminum version can withstand up to 1000 hours salt fog spray test. The extreme strength of the case joint is achieved by rolling the belt & compressing the flanges into contact with a sealant applied between the faces. This forms a joint which is both gas-tight and fire- resistant. MEASURING UNIT The achievement of the fixed stroke mechanism is the result of precision and high quality automation, and eliminates the need for an adjustable tangent. This confines all registration adjustments to the accessible change wheels behind the index. The long life synthetic diaphragms, coupled to the well-proven movement design, combine to give excellent stability and accuracy during the whole life of the metre. All materials have been selected for their superior resistance to chemicals and gas. The valve and the grid, thanks to a special Bakelite formulation, enjoy high gliding properties and are protected against premature wear. Finally, a back-run stop prevents the metre from running backwards in case of tampering. INDEX The metres are available with metric or cubic inch indexes. They come with a permanent magnet for pulse generation and can be retrofitted with a pulse transmitter. Ip54 and Ip67 versions are available for specific environments. QUALITY ASSURANCE Quality assurance procedures- such as ISO 9001- and strict controls throughout the manufacturing process ensure a very high quality level. APPLICATION The ITRON, with an installed base of over 30 million units, is a versatile meter that makes it the preferred choice of many large utilities world-wide. METROLOGY The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by the LNE), and more than 25 national metrological standards (DVGW,NMI Class 1....). Its design and the careful choice of materials enable the ITRON to meet the highest demand in international markets in terms of accuracy and long-term stability. During the preliminary test controls on the sonic nozzle test benches, all meters are tested at Qmin, 0.2 Qmax and Qmax. OPERATING PRINCIPLE The ITRON is a positive displacement diaphragm gas meter with a stand-alone twin chamber measuring unit. The twin chambers are each fitted with a flexible and gas-tight diaphragm which is moved by the differential between the inlet and outlet pressure. The Gas enters one side of the diaphragm pan while on the other side it comes out through a separate port on the valve. When one side is full, the rotating mono-valve moves on to the next position, allowing the gas to fill the empty side. A transmission gear and a mechanical coupling or stuffing box transfer the reciprocating motion to the mechanical retrofitable index. The measuring unit is housed in a robust gas-tight casing. CONSTRUCTION With its casing in steel, high protection against corrosion is ensured by 500 hours salt fog spray test resistant cataphoresis treatment. The aluminum version can withstand up to 1000 hours salt fog spray test. The extreme strength of the case joint is achieved by rolling the belt & compressing the flanges into contact with a sealant applied between the faces. This forms a joint which is both gas-tight and fire- resistant. MEASURING UNIT The achievement of the fixed stroke mechanism is the result of precision and high quality automation, and eliminates the need for an adjustable tangent. This confines all registration adjustments to the accessible change wheels behind the index. The long life synthetic diaphragms, coupled to the well-proven movement design, combine to give excellent stability and accuracy during the whole life of the metre. All materials have been selected for their superior resistance to chemicals and gas. The valve and the grid, thanks to a special Bakelite formulation, enjoy high gliding properties and are protected against premature wear. Finally, a back-run stop prevents the metre from running backwards in case of tampering. INDEX The metres are available with metric or cubic inch indexes. They come with a permanent magnet for pulse generation and can be retrofitted with a pulse transmitter. Ip54 and Ip67 versions are available for specific environments. QUALITY ASSURANCE Quality assurance procedures- such as ISO 9001- and strict controls throughout the manufacturing process ensure a very high quality level. Prepaid Gas Meter Sensus Meters satndars
Part NO DC current AC Voltage Resistance DC Voltage FC- 380 2.5m/25m/200m/20 20/50/250/1000V 1/10/100/1K/10k 0.1/0.5/2.5/10/50/250/1000V FC-2010 2m/20/200m/10A 200/600V 200/2000/20k/200k/2M/20M 200m/2/20/200/600V FC-838 2000u/20m/200m/10A 200/750V 200/2000/20k/2000k 200m/2000m/20/200/1000V FC-830L 2m/20m/200m/10A 200/600V 200/2000/20k/200k/2000k 200m/2/20/200/600V
Dn15 The minimum flow:0.03 The standard flow:1.5 The maximum flow:3 Heating minimum temperature:4 Heating maximum temperature:95 Battery working time: 8years Operating pressure:1.6 mpa Accuracy class:2 Size:15*12*11 Net:0.7kg
Model : KL-0071 Measuring range : 30¡«99999r/min Accuracy : (0.02%n+1dight) Measuring distance : 5¡«150cm Store time : Until take out the battery Memory : Max/Min/Last Value OperatingTemperature : 0¡«70¡æ Adoption time : 1(automation) Power supply : 31.5V AAA BATTERY Dimensions : 72mm x 136mm x 33mm Weight : 146g
Product synopsis Application:used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. Model: CM8829S With separate probe(s) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution: 0.1/1 Accuracy: í+1-3%n or í+2.5um Min. measuring area:6mm Min. sample thickness:0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating conditions:0-+45íµ(32¿H-104¿H),í_90%RH Dimensions: 126x65x27mm Weight: 81g(not including battery)
Specifications Display: 4 digits LCD, backlit Range: 0~1250 ¬ªm/0~50mil (other ranges can be specified ) Min.radius workpiece: F: Convex 1.5mm/Concave 25mm N: Convex 3mm/ Concave 50mm Min. measuring area: 6mm Min.Sample thickness : 0.3mm Resolution: 0.1 ¬ªm (0~99.9¬ªm); 1 ¬ªm (over 100¬ªm) Accuracy: f+1~3%n or 2.5 ¬ªm or 0.1mil (Whichever is the greater) Bttery Indicator: Low batter indicator. PC interface: with RS-232C interface Power supply: 2x1.5 AAA(UM-4) battery Operating condition: Temp. 0~50f¦ . Humidity
Acceleration 10Hz-1KHz 0.1-400m/ms+ 0.3-1312ft/ms+ 10Hz-10KHz 0.1-400m/ms+ 0.3-1312ft/ms+ Velocity 10Hz-1K 0.1-400mm/s 0.004-16.0inch Displacement 10Hz-1KHz 0.001-4.0mm 0.04-160 mil Accuracy:++5% Auto power off RPM(revolution):5-100000r/min Frequency:0.1 to 10KHz Metric/imperial conversion With RS232C interface Max hold Operating conditions:0-+45f+(32=¬-104=¬),f-90%RH Power supply:4x1.5V AAA(UM-4)battery Battery indicator: low battery indicator Optional accessories: RS-232C cable & software: 1.USB adaptor for RS-232C 2.Bluetooth interface Dimensions : 124x62x30mm Weight: 120g(not including battery)
Application: Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.Is pecifically designed for present measuring various mechanical vibration. So as to prove the data for the quality control, run time and equipment upkeep. Iuse the high-performance acceleration meter, realize the repetitiveness and accurate measurement.It has the function of testing axle bearing situation. Specifications: Acceleration 0.1-200m2/s (10Hz to 1KHz 10Hz to 10KHz ) Velocity : 0.1-200mm/s0. (10Hz to 1KHz) Displacement: 0.001-2.0mm(10Hz to 1KHz) Accuracy:·+5¼t Auto power off Max hold Operating conditions:0-+40f¦(32+H-104+H),f_90%RH Power supply: 4x1.5V AA(UM-3)battery Battery indicator: low battery indicator Dimensions : 160x68x32mm Weight: 181g(not including battery)
Features Used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters. Specifications Displayª 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz Display Range Ra: 0.05-10.00um/1.000-400.0uinch Rz: 0.020-100.0um/0.780-4000uinch Accuracy: Not more than 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 10um Material of Probe Pin: Diamond Measurement Force of Probe: 16mN(1.6gf) Probe Angle: 90fp Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 1~5 cut off optional Driving speed: sampling length = 0.25mm Vt=0.135mm/s sampling length = 0.8mm Vt=0.5mm/s sampling length = 2.5mm Vt=1mm/s returning Vt=1mm/s Resolution : 0.001¬ªm if reading ·+10¬ªm 0.01¬ªm if 10¬ªmf_reading·+100¬ªm 0.1¬ªm if reading fª100¬ªm Power Li-ion battery: rechargeable Operating conditions: Temp. 0-50f¦ Humidity
Features This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate Specifications Display·ª 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz, Rq, Rt Measuring Range Ra, Rq: 0.005-16.00um/0.020-629.9uinch Rz,Rt: 0.020-160.0um/0.078-6299uinch Accuracy: f_f+10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 5um Material of Probe Pin: Diamond Dynamo-measurement of Probe: 4mN(0.4gf) Probe Angle: 90fp Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 5l Driving speed: sampling length = 0.25mm Vt=0.135mm/s sampling length = 0.8mm Vt=0.5mm/s sampling length = 2.5mm Vt=1mm/s returning Vt=1mm/s Profile digital filter Filtered Profile: RC Filtered Profile: PC-RC Filtered Profile: Gauss Non-Filtered Profile: D-P Resolution : .001¬ªm if reading ·+10¬ªm 0.01¬ªm if 10¬ªmf_reading·+100¬ªm 0.1¬ªm if reading fª100¬ªm Evaluation length : 5 cut-off Power Li-ion battery: rechargeable Operating conditions: Temp. 0~50f¦ Humidity
Wholesale PH Meter
