Application: Siren and alarms is widely used in fire fighting, car, office, residential building and security equipment etc Specifications: Dc resistance: 19 ohm +/- 10% Impedance: 100 ohm +/- 25% at 1khz Frequency range: 2000hz +/- 20% S.P.L: >= 90db at 10cm 2000hz 9vp-p square wave >= 95db at 30cm 1000hz 12vp-p square wave Export standard carton
This product adopts a high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has a wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication. Specification: 1.Detection Range: 180 degree 2.Power Consumption: 0.45W (work) 0.1W (static) 3.Detection Distance:max.12m 4.IP65 Function: Detection field: The wide detection range is made up of up and down, left and right, the detection range could be adjusted according to your desire, but the moving orientation in detection field has great relation with the sensitivity. Identify day and night automatically: The ambient light of product could be adjusted according to your desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way. Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time). Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec ±3sec, and the maximum is 7min±2min.
Quick Sense(Qs-WR02): Wardrobe/Cabinet Smart IR Sensor Quick Sense(Qs-WR03): Mirror/Hand Smart IR Sensor for Auto Lights Auto On and Off Upon Moving Hand Power source: 220-240V/AC Power Frequency: 50/60 Install the product on the wall with two enclosed inflated s Connecting the power and the load to the sensor as the connection-wire diagram Switch on the power an It is a Short Distance IR Sensor. Its ON or OFF is controlled by hand movements. When you move your hands towards the IR sensor, it gets detection and turns on the light. The light will be switched off until the IR sensor detects another movement by hand. NOTE: In front of the detection window there shouldnâ??t be hinder or unrest objects affecting detection
Quick Sense Wardrobe Cabinet Hinge LED Motion Sensor Night Light System (White, 0.25 W) - Set of 10 Pack Smart Sensor Light Specifications: Material: ABS; Color: Grey Lighting Color: Warm white/Cool white (Optional) Battery: 12V 23A(Not Included) Type: Smart Sensor; Bead Quantity of Each Light: 3pcs How to Installation: Step1: First open the hinge screws on the backsheet Step2: Put the back sheet screws and hinges screwed together Step3: Put the battery into the LED hinge light Step4: Make LED lighting into the card pre-installed on a good film Step5: Put the thickest chucking and complete Can be used in your home cabinet, closet, cupboard, or wardrobe with a hinge. Note: suitable for hinges like the picture, the screw in the hinge must be screwed off, the led light base need to be mounted in there
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights Sensitivity Adjustable: Turn on Lights during Day or nights
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights Sensitivity Adjustable: Turn on Lights during Day or nights
Light turns on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual Fully Automatic Switching On And Off Operation. Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights. If you have any queries feel free to contact us. Quick Sense Innovations Official site. packing is tested before dispatched so that the item reaches the buyer safely and undamaged. Working: As shown in the above diagram out of three wire's Red: Load, Blue: Neutral & Brown: Phase. Connect Red & Blue to Load Application were using (i.e. Lighting) & Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep the torch over to the Photocell load will turn ON. Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights. If you have any queries feel free to contact us. Quick sense innovations. Packing is tested before dispatched so that the item reaches the buyer safely and undamaged.
Turn on the lights during the day or night Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights Sensitivity adjustable: Turn on lights during day or nights It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Sq Type Microwave Motion Sensor Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux) 18 Months Mfg Warranty Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. HF system : 5.8GHz CW radar,ISM band, Connection Point: L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily
Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack MINI PIR Sensor Switch, Max load: 100 w Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�° Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the â??+(sun)â?? position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions. Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest. It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack MINI PIR Sensor Switch, Max load: 100 w Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�° Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the +(sun) position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions. Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest. It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
Quick Sense(Qs-WR05): Touch Smart IR Sensor for Auto Lights It is a Touch Sensor. Its ON or OFF is controlled by touch metal. When your hands touch any metal surface connected by the metal ring, it gets detection and turns on the light. The light will be switched off when your hands touch again. Power source: 220-240V/AC Power Frequency: 50/60Hz Install the product on the wall with two enclosed inflated s Connecting the power and the load to the sensor as the connection-wire diagram Switch on the power an
Lux: turn on the lights during the day or night Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights Sensitivity adjustable: Turn on lights during day or nights It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
The HR series dual-core radar level sensor is a non-contact, microprocessor controlled, easy to install and maintain digital level instrument. Through the antenna emitter narrow and low power microwave pulse signals, the pulse signal in the space at the speed of light transmission, encounter reflects measured medium, reflected signal is received, the pulse signal of the transmitted pulse signal and receiving time interval and the datum is proportional to the distance to the surface of the measured medium, the emitting and receiving by measuring the time interval, to realize the antenna to the surface of medium distance measurement. Built-in LCD display, convenient site setting. It doesn't have to contact industrial media can meet the requirements of most of the material level measurement, so as to thoroughly solve the disadvantages of pressure type, capacitance type, float type of traditional measurement methods such as winding, jam, leaking, corrosion medium, safeguard inconvenience. Thus can be widely used in plastics, coal, grain, sewage disposal, petroleum, chemical, food and beverage, pharmaceutical and other industries. Non-contact measurement, corrosion resistance, easy installation, high measuring accuracy, fast response, long life, good stability, large span, can be used to measure the height of liquid and solid material, in the barn, oil tank, chemical raw materials tank, sewage pool, high corrosive environment, requirements of hygiene, environment of material level measurement is widely used.
Manufacturer: Texas Instruments IC DRIVER 4/0 16SOIC Applications: - Chemical and Gas Sensors - Field Transmitters: Temperature Sensors and Pressure Sensors - Military: Radars and Sonars - Motor Control: Brushless DC and Brushed DC - Military and Avionics Imaging - Temperature Sensors and Controllers Using Modbus
"FAMAGA Group OHG, the global supplier of industrial equipment and spare parts, is glad to provide encoders by Encoders Bei Sensors: We supply a complete range of the manufacturer's catalog, including the following items: Encoders HS35F-100-R2-SS-1024-ABZC-5V/V-SM18-EX Encoders 924-60004-003 Encoders HS45F-150-R2-SS-1024-ABZC-5V/V-SM18-EX Encoders NEG0001480 Encoders soem15-0216s001 Encoders GHT514-1024S020 Encoders SEUX30-1212-001 Encoders NEG0002606 Encoders DHO514-1024-003 Encoders EM-DR1-IS-5-RTB-28V/V Encoders H25D-SS-1024-ABC-4469-SM18-S Encoders HS35F-75-R2-SS-2048-ABZC-28V/V-SCS18-S Encoders NEG0001522 Encoders DHM510D4000-001 Encoders 3200-2674 Encoders NEG0002648 Encoders NEG0002754 Encoders NEG0002846 Encoders MS3106F18-1S Encoders CHO514-13BT-018 Encoders DHO514-0300S001 Encoders GHT514-1024S019 Encoders hhm306-0128s006 Encoders GHU9 25/5GT9/10000/G6R Our company is also pleased to offer products of other brands: Bei Sensors IBH Softec Schmersal BALLUFF Pepperl+Fuchs Bernstein Di-Soric Elobau Univer Eltra Aventics FESTO Camozzi Euchner END-Armaturen TAMAGAWA SENECA Airtac Murrelektronik Azbil Yamatake FRANKE-Filter Endress+Hauser IFM Ipf Electronic Kieback & Peter MD Micro Detectors Bihl Wiedemann ANDERSON-NEGELE KITAGAWA Georg Schlegel Metal Work Kipp Allen-Bradley Netter Vibration Kuebler RAFI LINDY 4B Braime SOUTHCO ELGO Electronic FAG RECO Pilz AIRTEC Pneumatic COMITRONIC-BTI Hydac Barksdale Keyence AirCom Pneumatic Garlock Mac Valves MAHLE (Filtration Group) Riegler Baumer Elreha Sick Siko FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world. Our mission is to provide fair prices, reducing the cost of production for our customers. A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms. Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site. You are welcome to check the full catalog on our website.
OUTPUT : 4-20 MA SUPPLY : 24 VDC TYPE :2 WIRE PRESSURE TRANSMITTER CAPSULE TYPE PROTECTION CLASS : IP 65 PROCESS CONNECTION : 1/2 " BSP;1/2"NPT ;1/4"BSP;1/4"NPT FIXED RANGE CAPSULE TYPE
This item will be shipped to Seoul, Korea. We share the available quantity with a price according to the schedules. 1) 12th on April: 20,000 -> sold out 2) 22nd on April: 20,000 -> Booked (but, there is a possibility of cancellation.) If the buyer will cancel their order, we can give you information by email or whatsapp. unit price: $8/1pcs, Advanced T/T 3)15th on May: 20,000 unit price: $5.5/1pcs, Advanced T/T bank transfer Product data sheet http://file2.dzsc.com/product/18/09/02/1140443_111
"Telemecanique Inductive Proximity Sensors OsiSense XS series (extended sensing range) allow you to detect all types of objects in all applications providing high detection performance for metal objects. This inductive sensor range with industry recognised high performing technology provide non-contact detection of material up to 20 mm. Inductive proximity sensors are available in flush and non-flush models (shielded and non-shielded). OsiSense inductive proximity sensors are purely for detecting any metal objects up to 60 mm and include an oscillator with windings (an alternating magnetic field is generated in front) making up the sensing phase."
Key-Wound Temperature Chart Recorders are equipped with liquid or air sensors, offer selectable 24-hour or 7-day operation and recording, and have a temperature range of 0�°â??150�°F. MA-80 models are wall-mounted while MA-81 units are portable. No power source or batteries are required for operation. Air sensors have bendable 14-3/8in (365mm) cable and liquid sensors are supplied with 5ft (1.5m) cable. Units include a package of 100 MAA-60 7-Day Charts and a felt-tip pen. Additional 7-Day and 24-Hour Charts for Temperature Recorder, and a package of five MAA-62 Felt-Tip Pens are available separately. Inquire for models with NIST-traceable calibration. Temperature sensors contain mercury and may be restricted for sale in some areas; check local regulations before ordering. Also, inquire for Temperature Recorders in other F or C ranges, and/or electric or battery-operated drives.