Quick Sense Wardrobe Cabinet Hinge LED Motion Sensor Night Light System (White, 0.25 W) - Set of 10 Pack Smart Sensor Light
Specifications:
Material: ABS; Color: Grey
Lighting Color: Warm white/Cool white (Optional)
Battery: 12V 23A(Not Included)
Type: Smart Sensor; Bead Quantity of Each Light: 3pcs
How to Installation:
Step1: First open the hinge screws on the backsheet
Step2: Put the back sheet screws and hinges screwed together
Step3: Put the battery into the LED hinge light
Step4: Make LED lighting into the card pre-installed on a good film
Step5: Put the thickest chucking and complete
Can be used in your home cabinet, closet, cupboard, or wardrobe with a hinge. Note: suitable for hinges like the picture, the screw in the hinge must be screwed off, the led light base need to be mounted in there
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
Supplier: Wired magnetic door sensors.
Quick Sense(Qs-WR02): Wardrobe/Cabinet Smart IR Sensor Quick Sense(Qs-WR03): Mirror/Hand Smart IR Sensor for Auto Lights Auto On and Off Upon Moving Hand Power source: 220-240V/AC Power Frequency: 50/60 Install the product on the wall with two enclosed inflated s Connecting the power and the load to the sensor as the connection-wire diagram Switch on the power an It is a Short Distance IR Sensor. Its ON or OFF is controlled by hand movements. When you move your hands towards the IR sensor, it gets detection and turns on the light. The light will be switched off until the IR sensor detects another movement by hand. NOTE: In front of the detection window there shouldnâ??t be hinder or unrest objects affecting detection
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Item NO. ZLU05035 PackingEach in a single blister card. Normal inner box and master carton. Product Name Motion sensor night light Certificate UL/CUL Material ABS flame retardant & PC, PS. Light Source With 2pcs white LED Size 58*45*105mm LED Power 0.6W Logo OEM Plug US/EU MOQ 5000pcs Vlotage 230V
Product name: Bathroom wall hanging intelligent touch screen energy-saving anti-fog LED makeup mirror with motion sensor Size : 60~100cm Material: Glass silver-plated Function: Integrated LED mirror lamp Intelligent touch switch Safety explosion-proof bluetooth