To satisfy the ever-growing and changing needs of customers, we are providing a wide range of Water Level Sensor. The Water Level Sensor offered by us is highly acknowledged amongst the customers for their best quality. Our product is used for measuring the level of water in various industries like oil and many more.
We generally ship via DHL Express in 1 Business Day after your item is purchased, product will be deliver in 3-4 Business days.
Ship on Buyer Account/Local Pickup:
Yes, we can ship on a customer's Shipping account. Local pickups are also accepted weekdays from 10-5 PM and by appointment.
Payment Option:
We prefer Bank Transfer. Contact us for other available PAYMENT OPTIONS.
Returns:
Unless Sold â??As-Is,â?? all of our products come with a 30 Day Warranty.
If your item is received in a different condition than stated (DOA, not working properly etcâ?¦).
We are more than happy to rectify any problems by replacing the item or issuing a refund.
Feedback:
We want our customers to be completely satisfied with their purchase.
We think good communication ensures a successful transaction and efficient problem resolution in advance of posting permanent feedback and gives both parties the best chance for a positive trading experience.
Model HQ15-A5 HQ15-A100
Rated primary current 5A AC 100A AC
Output Voltage 10 mV AC/A 1mV AC/A
Maximum input current 50A AC (Continuous) 130A AC (Continuous)
(45-66Hz,Ambient temp.50C)
Amplitude accuracy ±0.3%RD ±0.02%FS (10%-100%I1n),(45Hz- 66Hz)
Phase accuracy ±2 (10%-100%I1n)(45Hz-5kHZ)
The amplitude frequency characteristic ±0.1% (45Hz-5kHZ)(Deviation accuracy)
Conductor impact ±0.5 (Off-center)
The influence of external lectromagnetic fields 0.1A (In AC 400A / m electromagnetic fields)
Temperature coefficient ±0.02%/C of the reading data
Dielectric strength 3000 V AC rms/Continue 15 seconds(Circuits-iron core, iron core-shell)
The maximum rated voltage 300V AC rms
Applicable standards Safety: EN61010-2-032:2002,300V CAT III, Contamination II
EMC: EN61326:1997+A1:1998+A2:2001+A3:2003(Class A)
Mechanical parameters
Measurable conductor diameter Max.15mm
Cable length About 3m
Dimension (W x H x D) About 46135 21 (Excluding protruding parts)
Weight About 230g
Environmental conditions
Operating temperature 0 to 50 C (32-122 F)
Operating humidity 80%RH(No condensate)
Storage temperature -10 to 60 C (14-140F)
Storage humidity 80%RH(No condensate)
Operating environment Indoor, altitude up to 2000 meters
FEATURES
Suitable for 10A-200A cable online measurement.
Holding wire diameter: 20mm
Dimension: 52.5mm137.5mm28mm
Load capacity:
Installation: clamp type
Output mode: lead output
PARAMETERS
Electrical parameters
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.1%, 0.2%
Primary current 0 - 200A AC
Secondary current 0 - 200mA AC (customized)
Max. Cont. Input current 240A
Load capacity 4
Over voltage category CAT III 600V
Output signal (AC current) From 0 to 200mA AC at nominal input current
Output signal (AC voltage) From 0 to 2V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1minute
Temperature range -20C to +55C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode Lead output(2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm) 52.5 x 137.5 x 28
Weight (g) 400
Holding wire diameter (mm) 20
Max. jaw opening (mm) 20
Jaw color Red, yellow, blue, green, black
Material PC+ABS+Polycarbonate, UL94 V0
FEATURES
Suitable for 5A, 10A cable online measurement.
Holding wire diameter: 8mm
Dimension: 42.6mm 122.5mm 23mm
Load capacity: 4
Installation: clamp type
Output mode: lead output
PARAMETERS
Electrical parameters
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.2%, 0.5%
Primary current 0 - 10A AC
Secondary current 0 - 10mA AC (customized)
Max. Cont. Input current 12 A
Load capacity 4
Over voltage category CAT III 600V
Output signal (AC current) From 0 to 10mA AC at nominal input current
Output signal (AC voltage) From 0 to 1V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1minute
Temperature range -20C to +55C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode Lead output(2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm) 42.6 122.5 23
Weight (g) 225
Holding wire diameter (mm) 8
Max. jaw opening (mm) 8
Color Gray
Material PC+ABS+Polycarbonate, UL94 V0
FEATURES
Suitable for 10A-200A cable online measurement.
Holding wire diameter: 20mm
Dimension: 52.5mm 137.5mm 28mm
Load capacity: 4
Installation: clamp type
Output mode: lead output
PARAMETERS
Electrical parameters
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.1%, 0.2%
Primary current 0 - 200A AC
Secondary current 0 - 200mA AC (customized)
Max. Cont. Input current 240A
Load capacity 4
Over voltage category CAT III 600V
Output signal (AC current) From 0 to 200mA AC at nominal input current
Output signal (AC voltage) From 0 to 2V AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1minute
Temperature range -20C to +55C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode Lead output(2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm) 52.5 x 137.5 x 28
Weight (g) 400
Holding wire diameter (mm) 20
Max. jaw opening (mm) 20
Jaw color Red, yellow, blue, green, black
Material PC+ABS+Polycarbonate, UL94 V0
The Primary current sensor uses the same sensor technology as the original Rogowski coil. The True RMS inductive sensor does not use magnetic materials. The opening of the sensor is electronically closed and external currents are electronically rejected.
The accuracy, external current reject, and range of currents measured by the patented amp sensor substantially exceed the performance of the best clamp-on sensors. The key feature of the unit is the ability to leave it deployed on the line to record readings every 15 minutes for 90+ days. It easily attaches to the line with a standard insulating bar. Once on the line, it immediately begins to collect and record the primary current on the line.
The Primary current sensor is equipped with a 433M wireless port for communicating the recorded data into the userâ??s PC. The data is downloaded through GF2018S PC-Link Software, which allows the user to download, view and query the data stored on the Primary current recorder.
The housing of the Primary current sensor is made of ABS+PC and is built to operate safely, even in severe utility environments. It is resistant to shock, waterproof and resistant to flame. It also operates within a wide temperature range. The Primary current recorder has a screw insulation bar of installation, which allows it to hang on the line securely in all weather conditions.
PC-Link Software is a user-friendly software interface that allows the user to download, view, graph and export data from the Primary current recorder into Microsoft Excel. The data directly transfers from the Primary current recorder into Excel through an 433M Port.
PARAMETERS
Basic parametersã??
Recording ammeter kit 3 wireless current sensors (GF2018A, GF2018B, GF2018C)
433 HHT(handheld terminal) or 433M wireless data reader(GF2018R)
PC-LinkSoftware software(GF2018S)
Carrying case
Data recording interval 1min, 5min, 10min,15min, 30min;
Time can be set from 1 second to 60 minutes
Communication distance(wireless) Max 100m
Communication 433M, 868M or 915M (option)
Installation Installation with electricity; Disassemble with electricity
Battery 3.6 volt lithium battery,9000mAh; Battery can be replaced
Software requirements PC-Linksoftware & microsoft Excel
Processor 100 MHz or higher (200 MHz or higher recommended)
RAM 32 MB, 64M recommended
Drive space 15 MB to load software, 10 MB of operating Space
Use of position Outdoor or indoor
Electrical parameters
Range of operation
Voltage 69kV,35kV,20KV, 10kV, 6kV, 0.38kV
Current 0 to 400A; 0 to 800A; 0 to 1500A; 0 to 3500A;
Sensor opening Up to 3.3 cm
Resolution
Amps 1 to 99.9A 0.1A
100 to 300A 1A
Amps accuracy ±1% of reading plus 2 counts
Frequency 60Hz (57-63 Hz) or 50Hz (47-53 Hz) models available
Mechanical parameters
Weight (kg) 0.48
Carrying case(kg) 6.5
Environmental conditions
Operating temperature -40C to 60C
Product descriptionï¼?
The whole experimental cavity is in the glow generation region, uniform equivalent glow, this technology is a good solution to the traditional plasma work instability, In this way, the range and intensity of ionization is 100 times of that of the traditional PECVD, to the uneven accumulation of materials .
Use a quartz tube of a special shape (thin middle between two ends) as a reaction chamber for chemical vapor deposition.The furnace tube can rotate 360 degrees, Quartz stopper on the inner wall of the tube can help stir-fry the powder material and sintered more evenly, and the furnace body can be tilted to the left and right at a large angle, which is convenient to feed in and out, and the inclined angle is adjustable from 0 to 35 degree.
Widely used in the preparation of graphene at low temperature and the carbon coating experiment of powder material.
Main parameter
Furnace
Max. Tem1200°C
Working pressure difference range 0.1ï½?0.5MPa
Max. pressure 3MPa
Connection Φ6mmDouble clasp stainless steel joint
Vacuum unit KF25 series bellows and manual stopper valves
Vacuum degree 10-1 pa
The value can be displayed intuitively by the digital display vacuum tester
DESCRIPTION
CS-106 Winshield is a specially formulated copolymer protective coating used in place of
windows frames, glass, bathtub, plywood, plastic faced formwork, moulds prior to casting
concrete, to ensure a clean release and protective purpose.
FEATURES
Do not corrode glass, plastic or equipment
Minimize subjects cleaning
Cost effective
Apply on plywood, timber, steel, glass and plastic faced
Non-staining, Non toxic, non hazardous
Water-based and environmentally compatible
Product Features1. Perfect self-examination function: wrong signal will not sent to the appliance when the safety curtain sensor fails2. Strong anti-interference ability: has good anti-interference ability to electromagnetic signal, strobe light, welding arc and surrounding light sources.3. Easy to install and adjustable, simple wiring and beautiful appearance in accordance with European design standards4. Surface mount technology for superior shock resistance.5. IEC61496-1/2 standard of Type 4 and has passed CE certification, Type 2, Type 4.6.Short reaction time (â?¤15ms), Safe and reliable.7. 30 * 30mm width and thickness, effectively reduce the installation space; safety curtain sensor is connected to the cable through the aviation plug connector, which enables accurate, quick and simply assemble, dismantle and wiring.8. All electronic components of this safety curtain sensor are produced by world-renowned brands.9. This safety curtain sensor is mainly used in forging machinery and hydraulic equipment.10. For the press where the slider can be stopped at any position of the stroke, it can realize full protection or cooperate with the cam switch to achieve the protection of the stroke between 30 degrees and 180 degrees.Selection DiagramWiring Diagram
The product is smoke detector, hereinafter called detector. With a unique structure design and an intelligent MCU to process photoelectronic signals, it is provided with dust-proof, mothproof and anti-light interference etc. functions, ensuring the detector stability from design. It reacts very quick to visible smoke released by smoldering fire and flaming fire, and suitable for fire alarm in house, factories, shopping malls, hotels, restaurants, office buildings, teaching buildings, banks, libraries, warehouses, etc..
Product Feature
- Low-battery warning
- Auto-Reset after trigger
- Infrared Photoelectronic Sensor
- Sound & Flash Alarm & LED indicating Alarm
- SMT Manufacture Technology, Reliable Stability
- Dust-proof, Mothproof and Anti White light interference
Technical Parameter
Power Supply :DC 2*1.5 AA
Static current:
Overview
Quick Details
Type:
Pressure Sensor
Size:
OEM Size
Car Make:
MAYBACH;MERCEDES-B ENZ;volkswagen
OE NO.:
5149174AB 0061539728;0061531328;0041533028;0041533228;2E0906051A
Place of Origin:
Zhejiang, China (Mainland)
Brand Name:
ANT Auto
Model Number:
M-128
Warranty:
1 Years
Product Name:
Manifold Pressure Sensors
1OE NO.::
A0051535028
2OE NO.::
0041533228
3OE NO.::
2E0906051A
4OE NO.::
5149174AB
5OE NO.::
0051535028
6OE NO.::
0041533028
7OE NO.::
0061539728
8OE NO.::
0061531328
9OE NO.::
EP9451-R3A
SupplyAbility
SupplyAbility:
50000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
white box or bags or according to your request
Port
shanghai or ningbo
Lead Time
7-15days
Overview
Quick Details
Type:
Speed Sensor
Size:
OEM Size
Car Make:
Buick
OE NO.:
1541232
Place of Origin:
Zhejiang, China (Mainland)
Brand Name:
ANT
Model Number:
S-1082
Warranty:
1 Years
Product Name:
Speed Sensor
1OE NO.::
1541232
Working Power Range:
DC 9-16V
MOQ:
10PCS
OEM Order:
Accept
Shipping terms:
DHL,Fedex,Ocean etc.
Delivery time:
7-15 days
SupplyAbility
SupplyAbility:
100000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
Neutral Package
Port
Ningbo Or Shanghai
Lead Time
5-14days
Thermal gas mass flow meter is designed on the basis of thermal dispersion, and adopts method of
constant differential temperature to measuring gas flow. It has advantages of small size, easy installation,
high reliability and high accuracy, etc.
The meter contains two platinum resistance temperature sensors. The thermal principle operates by
monitoring the cooling effect of a gas stream as it passes over a heated sensor. Gas flowing through the
sensing section passes over two sensors one of which is used conventionally as a temperature sensor,
whilst the other is used as a heater. The temperature sensor monitors the actual process values whilst
the heater is maintained at a constant differential temperature above this by varying the power consumed
by the sensor. The greater the gas velocity, the greater the cooling effect and power required to maintain
the differential temperature. The measured heater power is therefore a measure of the gas mass flow
rate.
The format of gas velocity and power is shown as below:
��(1)
Where: is specific gravity of medium
V is velocity
K is balance coefficient
Q is heater power
Î? T is differential temperature
The medium temperature range of meter is -40ï½?220.
In the format (1), the specific gravity of medium is related to the density:
��(2)
Where: is the medium density in working conditionkg/m3
�n is the medium density in standard condition, 101.325kPa and 20 kg/m3
P is the pressure in working conditionkPa
T is the temperature in working condition
In the formats (1) and (2), there is a certain functional relationship between the velocity and pressure in
working condition, medium density, the temperature in working condition.
Due to the sensor temperature is always 30 higher than the medium temperature (environment
temperature), and the meter adopts method of constant differential temperature, therefore the meter do
not need to do temperature and pressure compensation in principle
Features:
1. Miniature s type tension load cells are small and it is easy to install them.
2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency.
3. The load cells are made of stainless steel and provide robust construction.
4. The load cells utilize strain gauge technology and provide high dynamic frequency
Applications:
Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc.
Technical specification:
Rated output
2.0/3.0 ± 10% mv / v
Zero balance
±2 % f.S.
Non-linearity
0.05% f.S.
Hysteresis
0.05% f.S.
Repeatability
0.05% f.S.
Creep (30min)
0.05% f.S.
Temp. Effect on output
0.03% f.S. / 10ºc
Temp. Effect on zero
0.03% f.S. / 10ºc
Input impedance
385±5
Output impedance
350±3
Insulation resistance
5000m/100vdc
Recommended excitation
5-10v
Maximum excitation
15 v
Compensated temp range
- 10 ~ 60 ºc
Operation temp range
- 20 ~ 80ºc
Safe overload
150%
Ultimate overload
200 %
Cable size
53m
Wiring
Red: + excitation black: - excitation
Green: + signal white: - signal.
1. Miniature s type tension load cells are small and it is easy to install them.
2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency.
3. The load cells are made of stainless steel and provide robust construction.
4. The load cells utilize strain gauge technology and provide high dynamic frequency
Applications:
Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc.
Technical specification:
Rated output
2.0 â± 10% mv / v
Zero balance
±2 % f.S.
Non-linearity
0.05% f.S.
Hysteresis
0.05% f.S.
Repeatability
0.05% f.S.
Creep (30min)
0.05% f.S.
Temp. Effect on output
0.03% f.S. / 10âºc
Temp. Effect on zero
0.03% f.S. / 10âºc
Input impedance
350â±5,
Output impedance
350â±5,
Insulation resistance
5000m, /100vdc
Recommended excitation
5-10v
Maximum excitation
15 v
Compensated temp range
- 10 ~ 60 âºc
Operation temp range
- 20 ~ 80âºc
Safe overload
120%
Ultimate overload
150 %
Cable size
Ã?4ã?3m
Wiring
Red: + excitation black: - excitation
Green: + signal white: - signal.
2316 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
