OPT Series Solar inverter (PV inverter) converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be off-grid electrical network. It is a critical balance of systemâ??component in a solar power system, allowing the use of ordinary AC-powered equipment. Suit for home applicance, office equipment, solar power system, and other equipments. Rated power 1KW / 2KW / 3KW / 4KW / 5KW / 6KW Optional Rated battery access 12VD / 24VDC / 48VDC / 96VDC Optional Battery charging ability 30A (default)-C0-C6 can be set City power-grid Input Voltage range 85-138VAC / 170-275VAC 45 - 65Hz Voltage Output 110VAC / 220VAC, ±5% (Inverter mode) 50/60Hz±1% Output wave Pure sine wave Inverter switching time >10ms (typical load) Inverter efficiency DC battery inverter > 85% (80% Resistance load) AC passby > 95% Output overload 110-120% @ 30s >160% @ 300ms Protection feature Battery overvoltage / low voltage, overload, short circuit protection, over temperature protection, Accept custumoerized Operating temperature 0-40C (Storage -15 - +50C)
Place of origin: guangdong, china (mainland) Brand name: oem Model number: yzf-mv300b Rated voltage: 380-480v Rated frequency: 50hz/60hz ±0.5 Output frequency: v/f 0-3000hz, v/c 0-650hz Speed range: 1:200 Speed fluctuation: ±0.3% Torque response:
I5000-mini economic inverters are developed for general applications of small power and oem market. It applies v/f control technology, making the functions of pid, multiple-speed step, dc braking, modbus communication, as well as less installation space (15% smaller than the counterparts) available. Specification: 1ac 220v -15% ~ +10%, 0.2kw 2.2kw 3ac 220v -15% ~ +10%, 0.2kw 2.2kw
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Mfrs. of Led Driver, Led Controller, SMPS Power Supplies for CCTV Camera / Security Systems, Switching Power Supplies, Battery Charger, DC/DC Converter, AC/DC Converter, Waterproof Led Driver, Rainproof Power Supply, Transformer, Medical Power Supply, Switching Non Waterproof ,Adaptors, Solar Products, Lithium Ion Charger, Inverter, UPS & Inverter, ECT. Best regards,
A Variable Frequency Drive (VFD) is a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the electric motor. Other names for a VFD are variable speed drive, adjustable speed drive, adjustable frequency drive, AC drive, microdrive, and inverter. Brands we sell : Siemens, ABB, Schnieder, Chint, LEgrand, Havells, INVT, Delta etc Application : Any kind of application related accept : TT, Paypal, LC, CFR, CIF etc
Wide DC input voltage range * DSP controller * High efficiency by using advanced IGBT and IPM * MPPT(Maximum power point tracking) technology * Transformer less, High efficiency * In accordance with international standards * Quick and easy installation * Operation parameters can be adjusted via LCD and keys * The perfect protection function * Designed to suitable for critical grid environment. Type :Grid Tied/Ongrid, Off grid, Hybrid String type/ Central Inverter Capacity : 500 va to 1000 kva Brands : Goodwe, Growatt, Schnieder, Abb, Delta, Solis, Fronius, Luminous, Livgaurd, Usha shriram etc
3W 3KVAC Isolation Wide Input AC/DC Converters TP03AL The rated output power of TP03AL series is 3W with wide input voltage range, for both AC input and DC input application. High reliability, Low power consumption, safety isolation .Widely used in industrial control and electrical instrumentation, smart home, which do not have high requirement on EMC. The EMC external circuit must be added if the products need to be applied to EMC harsh environment . Part NumberInput VoltageOutputEfficiency (Typ. ) % Voltage ï¼?VAC)Voltage ï¼?VDC)Currentï¼?Aï¼? RatedRange values TP03AL220S03LSW220(4:1)85-2653.30.6063 TP03AL220S05LSW220(4:1)85-26550.6068 TP03AL220S09LSW220(4:1)85-26590.3372 TP03AL220S12LSW220(4:1)85-265120.2574 TP03AL220S15LSW220(4:1)85-265150.2076 TP03AL220S24LSW220(4:1)85-265240.12580
2A non-isolated dc/dc converter TOPPOWER TP78XX-2 series switching regulators are ideal replacement for TP78xx linear regulators and LDOs. The efficiency of up to 92% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs. They are widely used in industrial control, instrumentation, and electric power applications. TOPPOWER can produce: 0.1W-40W DC-DC converters,3W-30W AC-DC converters,(SIP/DIP/SMD) 15W-1200W Enclosed /Open frame/DIN RAIL type AC-DC Switching Power supply, TOPPOWER quality : ISO9001:2015, IATF16949:2016 isolated voltage: 1.5KVDC ,2KVDC,3KVDC,4KVDC,6KVDC,10KVDC,3KVAC,4KVAC. Part NumberInput Voltage (VDC)OutputEfficiencyï¼?%ï¼? NominalRangeVoltageï¼?VDC)Currentï¼?mA) Vin (Min) TP781.5-2124.75~181.5200079 TP781.8-2124.75~181.8200081 TP782.5-2124.75~182.5200085 TP783.3-2124.75~183.3200087 TP785.0-2127-185.0200091 TP786.5-2128.5-186.5200092
High power factor up to 1 Pure sine wave output for sensitive and motor loads Built-in MPPT solar charger, Max. 150VDC PV open circuit voltage Smart LCD setting(Working mode, AC charge current/voltage and etc.) Auto switch between utility AC and battery within 8 millisecond as U.P.S Manual switch priority power source between battery and utility AC. Wifi and RS232 available. Cellphone APP for easy monitoring. Optimize battery charging by equalization function
Kecen KCM100/KC500 High Performance Vecter Variable Frequency Drive /Frequency Inverter / VFD/ AC drive (0.75KW-560KW /Output 3 Phase/ 220V/380V) for Motor /Fan pump / Water pumps /Blow molding machine/ Air condition / CNC/ Washing Machines/Transfer Machines/Crane/Blender/Spinning machine/Lathe/Papermaking machinery/Elevator/Stereo garage.
6W super wide input range regulated signgle output DC/DC converters TP06DE series is 6W, 8:1 wide input range efficiency up to 87%, 1500VDC isolated voltage , at operating temperature -40 to+85 With input undervoltage protection, output overcurrent, short circuit protection, widely used in communications, medical, industrial control, power, instrumentation,etc. FEATURES Super wide input range ï¼?8:1ï¼? Low Ripple &Noise 1500VDC isolated voltage High efficiency, high power density Output over-load,short circuit protection Operating temperature -40â?? to+85â?? Regulated parts RoHS compliant / SELECTION GUIDE Part Number Input Voltage (VDC) Output Efficiency (Typ. ) % Ripple &Noise MV Rated Range values Voltage VDC) Current TP06DE48S03W 48 9-75 3.3 1.8 78 50 TP06DE48S05W 48 9-75 5 1.2 81 50 TP06DE48S12W 48 9-75 12 0.5 85 50 TP06DE48S15W 48 9-75 15 0.4 86 50 TP06DE48S24W 48 9-75 24 0.25 87 50 Notes 1. Do not meet the conditions for full load start when input @9-10VDC only Can start at full load when voltage above 11V. 2. When the working temperature 30 , the maximum output power can be 10W for a long time. 3.It is necessary to add A voltage-stabilizing diode 5.1V / 0.5W between â??Vin pin and CTR pin,See the application circuit for details.
3W, 5W 3KVAC Isolation Wide Input AC/DC Converters TP03(05)AD series is 3W ,5W with wide input voltage range, for both AC input and DC input application, come with Low power consumption
Flowable, Dual Curing, Nano-tech Core Build-Up Composite Fusion Core DC Flo is a dual cure, radiopaque, two component, core build-up material in a convenient automix delivery syringe. This material flows conveniently, yet stacks without slumping, thus offering easy placement. The dual cure formulation allows complete curing. INDICATIONS Core build-up, for vital as well as non-vital teeth Luting of fibre-reinforced resin posts PRODUCT BENEFITS Light curing for time saving application Additional chemical curing for complete polymerisation Low heat development even in bulk application Flowable, non slumping formula for convenient placement Low shrinkage properties
Low Frequency Off Grid Solar Inverter PV3500 PRO Series (4-12KW) PV3500 PRO series is a multi-function inverter ,combining functions of inverter and mppt solar charger controller, solar charger and battery charger to offer uninterruptible power support with portable size. The comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and selectable input voltage based on different applications. Features: Smart LCD setting(Working modes, Charge Current, Charge voltage, etc. Built-in MPPT solar charge controller 80A/100A/200A MPPT efficiency max 98% Powerful charge rate up to 140Amp DC start &Automatic Self-Diagnostic Function WIFI / USB monitoring function with free CD (wi-fi optional) Supporting AGS, BTS port Compatible to generator
Most load types in power system belong to inductive load. In addition, power electronic devices are widely used in power enterprises, so the power factor of power grid is low. Lower power factor reduces equipment utilization ratio, increases power supply investment, damages voltage quality, reduces equipment service life, and greatly increases line loss. In order to improve the energy waste caused by the low power factor of power grid and these unfavorable factors of power supply production, it is necessary to effectively improve the power factor of power grid. Obviously, it is unreasonable and usually impossible for these reactive power to be supplied by generators and transmitted over long distances. Reasonable way is to generate reactive power where reactive power is needed, that is, to increase reactive power compensation equipment and devices. II. Structure Composition Generally speaking, low price Capacitance Compensation Cabinet is composed of cabinet shell, bus, circuit breaker, disconnector, thermal relay, contactor, lightning arrester, capacitor, reactor, primary and secondary conductor, terminal row, power factor automatic compensation control device, panel instrument, etc. III. Basic Principles In the actual power system, most of the loads are asynchronous motors. The equivalent circuit can be regarded as a series circuit of resistance and inductance. The phase difference between voltage and current is large and the power factor is low. After shunt capacitors are connected, the current of capacitors will offset part of the inductance current, so that the inductance current decreases, the total current decreases, the phase difference between voltage and current decreases, and the power factor increases. A reactive power automatic controller is installed in the compensation cabinet, which automatically puts in or removes capacitors according to the load force rate. The main function of the controller is to make the load close to the required reactive current, thereby improving the power factor. For enterprises, the main reason is to avoid the penalty of power factor not up to the standard (0.9).
High Frequency Off Grid Solar Inverter PV1800 VHM Series (2-5.5KW) PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications. Features: Pure sine wave solar inverter Output power factor 1 High PV input voltage range Built-in 80A MPPT solar charger Battery equalization function to optimize battery performance and extend lifecycle Built-in anti-dusk kit for harsh environment
High Frequency Off Grid Solar Inverter PV1800 VHM Series (2-5.5KW) PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications. Features: Pure sine wave solar inverter Output power factor 1 High PV input voltage range Built-in 80A MPPT solar charger Battery equalization function to optimize battery performance and extend lifecycle Built-in anti-dusk kit for harsh environment