Wisdom Automatic Equipment Co., Ltd.

WSD-VZF(R) -27/630-25 removable vacuum load switch + fuse combination electrical appliances (hereinafter referred to as combination electrical appliances) is a new generation of three-phase AC 50Hz, rated voltage 27kV indoor switchgear developed according to unique design concept and market demand. It is widely used in indoor armoured air insulated switchgear. It meets the requirements of GB3804-2004, GB16926-1997 and other standards. Under normal operating conditions, as long as the technical parameters of the vacuum switch are within the range, it can ensure the safe and reliable operation of the corresponding voltage level of the power grid. Environmental Conditions for Use The ambient temperature should not be higher than + 40, not lower than 10 (storage and transportation allowed at 30) Elevation does not exceed 1500m. Relative humidity: the daily average is not more than 95%, the monthly average is not more than 90%, the daily average of saturated vapor pressure is not more than 2.2 x 10-3 Mpa, and the monthly average is not more than 1.8 x 10-3 Mpa. Earthquake intensity does not exceed 8 degrees. No fire, explosion danger, serious pollution, chemical corrosion and violent vibration.

WSD-ZW32-24D Outdoor AC high voltage vacuum circuit breaker (hereinafter referred to as circuit breaker) is a rated voltage of 24 KV, 50 HZ three-phase AC outdoor distribution equipment.The utility model has the advantages of stable and reliable interruption performance, no danger of combustion and explosion, maintenance-free, small size, light weight and long service life.It is mainly used for breaking and closing the load current, overload current and short circuit current in power system.It is suitable for protection and control in power distribution systems of substations and industrial and mining enterprises, and more suitable for rural power grids and frequently operated places. This product meets GB1984-2003 "High Voltage AC Circuit Breakers" and DL/T402-2007 "Technical Conditions for Order of High Voltage AC Circuit Breakers" and DL/T403-2000 "Technical Conditions for Order of 12 kV~40.5 kV High Voltage Vacuum Circuit Breakers" and other technical standards.

CHARACTERISTICS 1. The vacuum arc extinguishing chamber uses longitudinal magnetic field arc extinguishing technology, which has the characteristics of long electric life and high reliability. 2. The imported silicone rubber/epoxy resin for outdoor use and the present APG vacuum injection technology are adopted. 3. Anti-ultraviolet, moistureproof, anti-corrosion, with the advantages of preventing surface discharge, good hydrophobicity and high mechanical strength. 4. Using simple and reliable spring operating mechanism, it has the advantages of small size and light weight. 5. high voltage vacuum circuit breaker can be equipped with isolation switch and three-phase linkage. It has visible breaks when the isolation switch is switched off. It also has anti-mistake interlock between the isolation switch and the circuit breaker body. It can be equipped with arrester strut insulators. Operational sequence When operating the disconnector, the first step is to confirm that the circuit breaker should be in the open state. Use the insulated tie rod hook to fasten the closing pull ring or the opening pull ring of the operating handle of the isolation closure, pull down slightly, drive the spindle to rotate, open or close the isolation switch. When the spindle rotates the dead point position of the compression spring, a certain tension is maintained so that the blade can be reliably closed or opened to a safe isolation position.

XL-21 low-voltage power distribution cabinet Overview XL-21 Low Voltage Switch Cabinet is suitable for power plant, industry and mining enterprises. It is used for power distribution in three-phase four-wire or three-phase five-wire system with AC voltage of 500V or less. XL-21 low-voltage power distribution box is installed on the wall of the indoor device and repaired in front of the screen.  Structural characteristics XL-21 Low Voltage Switch Cabinet product is closed, the shell is formed by bending steel plate, and the knife switch operating handle is located at the upper part of the right column in front of the box, which can be used for switching power supply. A voltmeter is installed in front of the distribution box to indicate the voltage of bus bar. There is a door in front of the distribution box. When the door is opened, all the equipment in the distribution box is exposed, which is convenient for maintenance. The distribution boxes adopt domestic self-designed components, which have the characteristics of compact structure, convenient maintenance and flexible combination of line schemes. low-voltage power distribution cabinet is equipped with air circuit breaker and fuse as short circuit protection. Contactors and thermal relays are also equipped. The front door of the box can be equipped with operation buttons and indicator lights.

1. Use (H) RW 12-27 drop fuse and pull-load drop fuse are outdoor high-voltage protective appliances, which are assembled on the high-voltage side of distribution transformer or branch lines of distribution line, and are used for overload and short-circuit protection of transmission lines and power transformers and for sharing rated load current. 2. Brief introduction of structure The drop fuse consists of two parts: insulating bracket and fuse pipe. The static contacts are installed at both ends of the insulating bracket, and the movable contacts are installed at both ends of the fuse pipe. The fuse pipe consists of an inner arc extinguishing tube and an outer epoxy glass tube. Pull-load drop fuse adds elastic auxiliary head and arc extinguishing cover to divide and close load current. When a drop fuse is in normal operation, the fuse pipe is tensioned by means of the fuse. Then a closed position is formed. When the system fails, the fault current causes the fuse to fuse rapidly and form an arc. The arc extinguishing tube is heated by the arc and decomposes a large number of gases, which forms a high pressure in the tube and blows longitudinally along the pipeline. The arc is rapidly elongated and extinguished. After the fuse is fused, the lower moving contact loses tension and turns down. The locking mechanism releases the fuse tube, and the fuse tube falls down, forming an obvious breaking position. When the load needs to be pulled, the contact is pulled by the insulating rod. At this time, the active and static contacts are still in contact. The contacts are pulled by the insulating rod, and the auxiliary contacts are separated. Arc is generated between the auxiliary contacts. The arc is elongated in the slot of the arc extinguishing hood. At the same time, the arc is extinguished when the current passes zero. 3. Implementation criteria The product performance conforms to GB15166.3-94 national standard and IEC282-2 international standard. 4. Conditions of Use 1. Environmental temperature: - 40 ~40 C; 2. No more than 1200 m above sea level; 3. The wind speed is not more than 35m/s. 4. Earthquake intensity does not exceed 8 degrees. 5. Fuses are not suitable for the following places: A. Places where there is a danger of combustion or explosion; B. Places with violent vibration or shock; C. Areas with heteroelectrochemical gases, severe air pollution and salt fog. 5. Instructions for Order 1. Product type, name, rated voltage, rated current and rated switching-on current; 2. Environmental requirements (anti-pollution, plateau type); 3. Special requirements can be consulted with our company. Manufacturer of intelligent switch cabinet--low-voltage, high voltage power distribution switch cabinet, also have many other electric equipment electric power accessories, intelligent transmission and distribution automation system

Xl-21 series power distribution box is suitable for power distribution and lighting distribution in industrial and civil buildings with AC frequency of 50 Hz, voltage of 500 V and below, three-phase four wire power system. At the same time, it is suitable for making all kinds of motor starting cabinets, including full voltage direct starting cabinet, full digital control soft starting cabinet, self coupling step-down starting cabinet, star delta starting cabinet, multi speed motor starting cabinet, etc. There are dozens of primary line scheme numbers or derived scheme numbers for selection, which have a wide range of applications. This product is an indoor enclosed distribution box. The box body is made of thin steel plate by bending and welding. The front of the box body is a single left door. The door is equipped with voltmeter, ammeter and other measuring instruments, operating appliances and signal appliances. It is a power distribution device with simple structure, reliable operation and low cost. Characteristics 1. The main electrical performance fully conforms to iec60439-1 and gb7251.1. 2. The auxiliary circuit has local, remote and automatic control switching function, and the contactor can adopt direct protection. 3. The outlet switch adopts a new type of molded case short circuit and compound release with small volume, high breaking and short (or no) flashover. It has overload and short-circuit protection function, and can install leakage protection function according to user's requirements. 4. The motor circuit has the functions of overload, short circuit, undervoltage and phase loss protection. 5. The product meets the protection level of IP42, and can be used as outdoor power, safe and reliable.

I. Use AC gapless metal oxide arrester (hereinafter referred to as arrester) is used to protect AC electrical equipment of corresponding voltage level from lightning overvoltage and operating overvoltage damage. Product Implementation Standard: GB11032 - 2010 "AC electrical equipment arrester". II. Conditions of Use 1.It is suitable for indoor and outdoor use. 2.Ambient temperature (-40 +40) C;O 3.The maximum solar radiation intensity is 1.1kW/m.2 4.The altitude does not exceed 2000 m. 5.The rated frequency of AC system is (48-62) Hz. 6.The power frequency voltage applied between the arrester terminals for a long time should not exceed the continuous operating voltage of the arrester. 7Earthquake intensity 8 degrees and below; 8.The maximum wind speed does not exceed 35m/s. III. Structure and Characteristics This kind of arrester is assembled by superposition of non-linear zinc oxide resistors and sealed in high voltage insulating ceramic sleeve without any discharge gap.Under normal operating voltage, the arrester is insulated with high resistance; when it is impacted by overvoltage, the arrester is in low resistance state, releasing impulse current into the ground quickly, so that the voltage on the electrical equipment parallel to it is limited to the prescribed value, so as to ensure the safe operation of the electrical equipment.The arrester is equipped with a detachment device. When the arrester operates under overload or suffers accidental damage, the internal pressure increases sharply, so that the arrester can be detached from the device to ensure that the ceramic sleeve is not damaged.The arrester has the characteristics of good steep wave response, high shock current tolerance, low residual voltage, reliable operation, no power frequency continuous current, simple maintenance and so on.

WSD-FLW34-24 SF6 load switch WSD-FLW34-24 SF6 load switch is suitable for outdoor three-phase AC distribution system with rated voltage of 24 kV and rated frequency of 50/60 HZ.  Overview WSD-FLW34-24 SF6 load switch is suitable for outdoor three-phase AC distribution system with rated voltage of 24 kV and rated frequency of 50/60 HZ. It can be used for on-off and off-load currents and short-circuit currents. The products are suitable for substation, industrial and mining enterprises, protection and control of farm network, automatic distribution network of farm network and frequent operation places. WSD-FLW34-24 SF6 load switch is used for operation control switch of overhead line distribution system. There are many types. It has many outstanding advantages, such as no oil, simple mechanism, reliable performance and no maintenance, and has been widely used so far. This High Voltage Switch Cabinets with FDR type fault detector or RTU remote control terminal device to form a very simple distribution automation system, which can realize automatic fault location of overhead lines and automatic isolation of fault sections.