QC Electromagnetic Overhead Crane Application In loading and unloading, the crane can lift iron or steel blocks, cylinders and so on. It is very convenient for application in loading, unloading, and moving. Permanent Magnetic crane are the most ideal lifting facility for factories, docks, warehouses and transportation. Description QC type electromagnetic overhead crane is a kind of heavy duty magnet crane, which is consisting of beams, cabin, flexible electromagnetic chuck, crane traveling mechanism, trolley lifting and cross traveling mechanism, electrical control system. The beams are welded by the machine hands, which make the structure more reasonable and reliable; The cabin used for operating the crane, which has seats inside; The electromagnetic chuck can adsorbs iron goods; The trolley can move horizontally on the rail fitted on beams; Floor adopts insulation pads and toughened glass for windows; extinguisher and fan are equipped. Both traveling mechanism and trolley motors are special motors for canes, large starting torque and loading capacity. Other accessory like air-condition, buzzer, inter phone can be configured according to our clients request! The shape of the magnetic can be designed according to adsorptive goods.
QZ Double Girder Grab Gantry Crane Description Double girder grab bucket overhead crane consists of box-shaped beam, grab, trolley lifting and traveling mechanism, crane traveling mechanism, cabin and electric control system. The grab can grab debris, mine stone, or other things, it is widely used for loading goods in power plant, freight yard, workshop and wastes treatment factory to transport bulk materials. All the mechanism is operated in cabin. There is three direction to enter cabin platform. The trolley can move horizontally on the rail fitted on beams. The beams are welded by the machine hands, which make the structure more reasonable and reliable. Double girder grab overhead crane mainly could be classified into several working duties, A3-A7. The grab separately hung over the switching mechanism and lifting mechanism with four steel wire ropes. can open and close in any height, but it only adapts to particle materiel accumulation in natural state. The grab If you want to grab the material under water or special material, you should mention it when order good. Feature 1.Reasonable structure, strong bearing capacity 2.Main lifting mechanism is equipped with speed switch 3.Safe and reliable operation 4.Commodious cabin and open view 5.Low cost maintenance, long working life 6.Strong box type, welding by machine hand Safety device As safety is the most important for such heavy machine, we are equipped with the following devices: 1.Crane traveling limit and lifting height limit switch 2.Weight overload protection device 3.Top quality long time bearing 4.Polyurethane materials buffer 5.Voltage lower protection function 6.Phase sequence protection function 7.Current overload protection system 8.Emergency stop function 9.Rain cover for outside hoist, driving units, electrical cubicle. 10.Warning indicator: flashing lights and warning sound.
Fixed Scissor Lift Table Lift Table Quick Details Place of Origin: Henan, China (Mainland) Brand Name: Jinrui Lift Mechanism: Scissor Lift Lift Drive / Actuation: Hydraulic Power: 2.2kw/3kw Rated Loading Capacity: Customized Lifting Height: Customized Table Size: Customized Overall Dimensions: 1820*1400*1180mm or more Weight: 660KG-2800KG Emergency stop system: Include Working duty: A3 Industry voltage: As your requirement Painting color: As your requirement Certification: ISO 9001 Weight overload protection device: Include Application : It is used to lift up and down large cargo to different levels, normally in the assembly line and other cargo transferring. Scissor Lift Table Packing & Delivery Detail MOQ: 1 SET Package: Wooden Case Port of dispatch: Qingdao/Tianjin/Shanghai/Other Delivery time: Within 10 working days after the receipt of deposit After-sales Service Provided: Engineers available to service machinery overseas Payment: TT/LC/Discussible Installation: The installation team can be sent to local site to install for customer. Warranty: 12 month.
ISO, CE, SGS Certificates Double Girder Gantry Crane Double girder gantry crane Application Double girder gantry crane is widely used for loading, unloading, transportation in outdoor workshop, ourdoor warehouse, stock yard, railway and freight station, construction and bridhe building, harbor and more Parameters Macx. Lifting capacity: 500 ton Span: 10- 35 m Max Lifting height: 12 m Control mode: Remoted controll, Ground control or cabin control Working duty: A5-A8 Power source: Cable or slide wire. Gantry crane Description The double girder gantry crane consist of Main beam, Support legs, Electric hoist with trolley, Motor, Reducer, Cabin, and other Electric parts. The Frame crane main beam and support legs are high quality welded steel box-shape, high intensity, rigidity, stanle, and long service life. The Cantilever arms can added the working range. The gantry crane lifting mechanism is composed by high quality electric hoist, motor, reducer, coiling block, lifting and traveling limit switch, traveling smoonthly, can emergency stop. Equip with overload protection, avoid overload damaging the hoist and gantry crane. Motor, reducer and Electric parts adopt international brand, such as Schneider, Siemens, Chint and other to ensure accurate operation, excellent performance and convenient maintenance Equip with frequency converter can be supplied to meet your demand. And, besides common hook, you also can choose other lifting tools, such as grab, electromagnetic chuck, billet clamp and container holder
Single girder gantry crane Specifications Lifting capacity: 5 - 20 ton Lifting height: 6 - 12m Span: 7.5 -35 m Lifting speed: Single speed or double speed Working temperature: -25 to +40 degree Control method: Pendent control, remote control, ground control Applications: workshop, warehouse, metallurgy, hydraulic engineering, open-pit mines, stockyards, port terminals, nonferrous metal mining and more Single girder gantry crane introduction 5 - 20 ton Single girder gantry crane is a light duty crane machine. In general, gantry crane is widely used at outdoor and warehouses to load, unload or grab materials, the gantry crane is equiped with CM1, MD1 model electric hoists, electric hoists travel along with the rails under the I-steel, with accurate movement of up and down, left and right, forward and backward. The single girder gantry crane is prohibited to be used for lifting blazing, melting metal or toxicant, also can not be used in explosion-proof or insulating working conditions.
Single Girder Gantry Crane is used together with CD/MD model electric hoist, traveling on the railway for general handling and lifting operations. It is consists of 4 parts, they are main beam, electric hoist, two ground beams and four legs. This machine is a regular crane widely used at open ground and warehouse to load, unload or grab materials for highway, bridges, power station and other construction workshops projects. Parameters feature: Lifting capacity: 3~32t Span: 7.5-31.5m Max. lifting height: 30m Lifting speed: 8 or 0.8m/min Traveling speed: 20 or 30m/min Work duty: A3-A5 Work temperature: -20°C-+40°C Control method: Pendant line with pressing button, remote control or cabin control
QD Double Girder Hooks Overhead Crane Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QD model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.
Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QB model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.
Guide Rail Lift Table Quick Details Place of Origin: Henan, China (Mainland) Brand Name: Jinrui Lift Mechanism: Lift Chain Lift Drive / Actuation: Hydraulic Power: 1.5â??12kw Rated Loading Capacity: Customized Lifting Height: Customized Table Size: Customized Weight: 660KG-2800KG Certification: ISO 9001 Other Country: Henan, China (Mainland) Weight overload protection device: Include Emergency stop system: Include Working duty: A3 Industry voltage: As your requirement Painting color: As your requirement Application: It is used to lift up and down large cargo to different levels, normally in the assembly line and other cargo transferring. Package & Delivery MOQ: 1 SET Package: Conform to the exported package . Port of dispatch: Qingdao/Tianjin/Shanghai/Other Delivery time: Within 15 working days after the receipt of deposit Payment: TT/LC/Discussible Installation: The installation team can be sent to local site to install for customer. After-sales Service Provided: Engineers available to service machinery overseas Warranty : 12 month.
Single Girder Gantry Crane is used together with CD/MD model electric hoist, traveling on the railway for general handling and lifting operations. It is consists of 4 parts, they are main beam, electric hoist, two ground beams and four legs. This machine is a regular crane widely used at open ground and warehouse to load, unload or grab materials for highway, bridges, power station and other construction workshops projects. Parameters feature: Lifting capacity: 3~32t Span: 7.5-31.5m Max. lifting height: 30m Lifting speed: 8 or 0.8m/min Traveling speed: 20 or 30m/min Work duty: A3-A5 Work temperature: -20°C-+40°C Control method: Pendant line with pressing button, remote control or cabin control
Double girder gantry crane is used together with electric trolley as lifting device traveling on the railway with high space utilization and heavy strong structures. It is mainly composed of two main beams, electric trolley, two ground beams and four legs, the power is supplied by cable or slide wire. This kind of crane is widely used in open storage, loading and unloading operations yard, railway freight station, port cargo area, where it has a high frequency or more lifting times. Parameters feature: Lifting capacity: 5~500t Span: 18-35m Lifting height: 10/11m Lifting speed:7.2m/min ~ 11.4m/min Trolley traveling speed: 34.5m/min ~ 47.1m/min Crane traveling speed: 38.3m/min ~ 44.6m/min Work duty: A5-A7 Work temperature: -20°C-+40°C Control method: Remote control or cabin control
Wall Mounted Rotating Arm Cantilever Jib Crane Manufacturer The Wall Mounted Jib Crane is the small and medium-sized lifting equipment, is installed on the wall, doesn`t take up much space, high efficiency, simple structure, operate convenience, energy conservation, time-saving, turning agile, economize labor and flexibility, wide working conditions. Wall Mounted Jib Crane can be operated optionally in three-dimensional space, especially in short distance, dense occasion, is widely used in immobile places like workshop, warehouse and dock.
Fixed Mounted Jib Cranes Introduction The Fixed Mounted Jib Cranes are a small and medium-sized lifting equipment, unique structure, safe and reliable, high efficiency, save energy, save time and labor, more flexible, it can operate freely in 3D space, and it can show its superiority more especially when working in the short range and intensive lifting occasions. Users can choose the Fixed Mounted Jib Cranes weight from 0.25 to 2 tons, the operation methods can be chosen ground control, remote control, pendent line with press button, manual operation. Fixed Mounted Jib Cranes Application The Fixed Mounted Jib Cranes are usually used for loading and unloading operations in workshops, warehouses, docks and other fixed workstations, machine tools, welding/fabrication stations and some assembly stations, often handle lighter loads at lower duty cycles than overhead crane and gantry crane.
Production description European single girder overhead cranes have such design concepts as small dimension, light weight, energy-conservation and environment protection. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height higher that increases effective working space of workplace, are widely used in machinery production, assembling, petrochemicals, electric power, construction, paper making, railways building, etc. Safety & Mechanical Features 1.European single girder overhead crane is compact lifting machinery designed and manufacturing in the strict according with FEM, DIN and ICE standard, compared with general overhead crane (bridge crane), weight is reduced by about 15-30% of common crane, max wheel pressure is reduced by about 10-30%. Have less requirement to the workshop structure, reduce production cost. 2.The frame of crane beam is square box frame, it is made by Q235 or Q345 steel plate, it has smaller body to get more lifting space. 3.Motor adopts Insulation grade F, protective grade IP54, it shall also have over heated and alarming function, the motor cover adopts aluminum alloy to drawing the molding, with better heat dissipation. 4.Germany reducer, Harden face gear, improve the bearing ability, better sealing of the shell, ensure there no grease penetration 5.Bridge crane wheel assembly are technically advanced and successfully used in different industries like steel plant, rolling mill, cement plant, fertilizer plant, paper mill, chemical industries, etc. Wheel material: ZG430-640 cast steel, 60#, 65$ 65Mn, 42CrMo, 45# or according to your demand. 6.Main electric elements adopts the international brands include Schneider, Siemens, ABB. The protective grade of electric control box shall not less than IP54. 7.This overhead crane(bridge crane) has several safe protection functions, such as up/down limit switch, overload protection, low-voltage protection and long traveling limit switch, and the cross and long traveling motors have soft start function, the crane is very easy to use. 8.This overhead crane(bridge crane) is widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment. 9.The all motions of this overhead crane are double speeds, the lifting motor is double speed type, the cross traveling motor and long traveling motor are controlled by frequency inverter.
LDA Electric Single Girder Beam Overhead Crane Product Description Single girder overhead crane also called single beam bridge crane, it is characterized by more reasonable structure and higher strength steel as a whole. Used together with CD1, MD1 model electric hoist as a complete set. The operation mode has the ground cable handle, ground wireless remote control, operation and the two mode of operation and driving. Single girder overhead crane usually lifting capacity: 0.5ton ~ 32ton, lifting height:3m~60m, span: 7.5m~31.5m, working temperature: -20°C~60°C, working grade: A3~A6. LDA Single Girder Overhead Crane is widely used for material lifting in many industries, manufacturing workshop, mold inject workshop, machining workshop and so on. But the crane is forbidden to work in the Inflammable, explosive and corrosion environment. Feature 1.Customized design overhead crane; 2.Support OEM / ODM for our clients; 3.Steel material adopt high quality carbon steel Q235 or Q345B; 4.Easy to install,operate,maintain; 5.Crane drive: IP54 or IP44,level F insulation; 6.With senior technical engineer team and perfect sales service
Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QD model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.
Single girder overhead crane description Single girder overhead crane runs on an elevated runway system along the length of a factory, the hoist moves the load up and down, and the bridge of the crane moves the load forward and backward. It is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel plate. It is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set. Widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment. Single girder overhead crane classification LDA type single girder overhead crane * It is widely used in warehouse, plant, material stock to lift the goods. * Capacity: 1ton-20ton * Span: 7.5m-28.5m * Lift height: 3m-30m * Working with CD1 OR MD1 electric hoist LX type single girder overhead crane * It is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse. * Capacity: 0.5ton-10ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with CD1 or MD1 electric hoist LDP type single girder overhead crane * It belongs to very low clearance light duty equipment. * Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop. * Capacity: 1ton-20ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with CD1 OR MD1 electric hoist European type single girder overhead crane * It compact lifting machinery designed and manufacturing in the strict according with FEM and DIN standard, which is advanced technology and beautiful design. * Capacity: 1ton-20ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with European type electric hoist * Electric Hoist 10 T Overhead Crane Workshop Bridge Crane Lifting System z
Feature: bridge crane condition: new Application: widely used for all kinds of work yard rated Loading capacity: 1t, 2t, 3t, 5t, 8t, 10t, 12t, 16t, 20t Rated lifting moment: as desingn Max. Lifting load: 20ton max. Lifting height: 18m span: 7.5-31.5m place of origin: henan, china brand name: jinrui model number: ld/ldp/lx/hd certification: ce iso gost Warranty: one year after-sales Service provided: engineers available to service machinery overseas Other country: henan, china (mainland) Voltage: 380v, 50hz, 3-phase ac or as request Temperature: -25 Working class: a3-a5 Girder structure: truss or box type Color: according to your demands Custom design: available Export markets: all over the world
Place of Origin: Henan, China (Mainland) Brand Name: Jinrui Lift Mechanism: Lift Chain Lift Drive / Actuation: Hydraulic Power: 1.5â??12kw Rated Loading Capacity: Customized Lifting Height: Customized Table Size: Customized Overall Dimensions: Customized Weight: 660KG-2800KG Certification: ISO 9001 After-sales Service Provided: Engineers available to service machinery overseas Other Country: Henan, China (Mainland) Weight overload protection device: Include Emergency stop system: Include Working duty: A3 Industry voltage: As your requirement Painting color: As your requirement Application : It is used to lift up and down large cargo to different levels, normally in the assembly line and other cargo transferring. MOQ: 1 SET Package : Conform to the exported package . Port of dispatch :Qingdao/Tianjin/Shanghai/Other Delivery time : Within 15 working days after the receipt of deposit Payment: TT/LC/Discussible Installation: The installation team can be sent to local site to install for customer. Warranty : 12 month .
Feature: gantry crane Condition: new Application: outside warehouse, freight yard or railway sideways Rated loading capacity: 5-500t Rated lifting moment: 50-5000kn Max. Lifting load: 500ton Max. Lifting height: 30m Span: 10-50m Place of origin: henan, china (mainland) Brand name: jinrui Model number: mg Certification: ce sgs iso gost Warranty: 1year for main body, lifetime maintenance. After-sales service provided: engineers available to service machinery overseas Other country: henan, china (mainland) Main electrical part: siemens or schneider Duty class: a5-a8 After sales service provide: engineers available to service industrial voltage: according to your request Gb/t 19001-2000 idt iso 9001:2000: passed Gb/t24001-2004 idt iso14001:2004: passed Gb/t 28001-2001 ohsas iso18001:1999: passed Current overload system: include Voltage lower protection function: include Payment Tt/lc/paypal Delivery Within 35 days receiving deposit
