Double Hook Gantry Crane

Lifting capacity(t):5t 10t 16/3.2t 20/5t 32/5t 50/10t Working duty:A5-A6 Span(m):18m 22m 26m 30m 35m Lifting height(m):10m 11m, 12m Lifting speed(m/min):2.9-11.4 m/min Power supply:380V 50HZ 3PHS(or according to your demand) Electricals and other parts are packed by high quality plywood crates, Main beam packaged by plastic film and woven plastic cloth.

MG model double beam gantry crane with hooks is applied in outside plant or railway sideways to conduct common lifting and loading unloading works. This double beam gantry crane is composed of two beams, four support legs, crane travelling systems, trolley and electric equipment. The frame of beams and legs adopts box-type welding mechanism. The crane travelling mechanism adopts separate drive. All mechanisms are operated in the driver's cabin. Power supply of crane adopts cables and sliding wires, select one when ordering. The MG model gantry crane is heavy duty type crane, the duty grade are A3~A6, the capacity from 5t to 250t, the span from 7.5m to 35m, the standard lifting height are 6m, 9m and 12m, the temperature of working environment within -20~+42 degree.

Double beam gantry crane is a variant of gantry crane. There are double-beam gantry cranes, as well as single-beam gantry cranes. It is mainly used for loading and unloading of outdoor cargo yard, storage yard cargo and bulk cargo. Gantry cranes have the characteristics of high site utilization, large operating range, wide adaptability, and strong versatility. They have been widely used in port cargo yards. Its metal structure resembles a door-shaped frame. Two feet are installed under the main beam, which can directly walk on the ground track. The main beam can have outriggers at both ends. Gantry cranes are bridge-type cranes where the bridge is supported on the ground track by the legs on both sides. It is structurally composed of a mast, a trolley operating mechanism, a crane trolley and electrical parts. Some gantry cranes have outriggers on one side, and the other side is supported by a factory or trestle, which is called a semi-gantry crane. The gantry crane consists of the upper bridge (including the main beam and the end beam), the outriggers, and the lower beam. In order to expand the working range of the crane, the main beam can extend beyond the legs to one or both sides to form a cantilever. A crane trolley with a boom can also be used to expand the crane's operating range by tilting and rotating the boom.

Single Girder Gantry Crane is used together with CD/MD model electric hoist, traveling on the railway for general handling and lifting operations. It is consists of 4 parts, they are main beam, electric hoist, two ground beams and four legs. This machine is a regular crane widely used at open ground and warehouse to load, unload or grab materials for highway, bridges, power station and other construction workshops projects. Parameters feature: Lifting capacity: 3~32t Span: 7.5-31.5m Max. lifting height: 30m Lifting speed: 8 or 0.8m/min Traveling speed: 20 or 30m/min Work duty: A3-A5 Work temperature: -20°C-+40°C Control method: Pendant line with pressing button, remote control or cabin control

Detailed Description: MTR bridge double girder launching gantry crane made in china is generally used in the erection of the Highway Bridge and Subway Bridge, using the precast segmental prestress concrete box beam (PC beam) assembly. The main feature is the high efficiency of construction and self-traveling. Generally it is composed of the main beam, leg and winch trolley, the main girder is used for bearing, the leg is to execute machine transverse moving, longitudinal moving, leveling, support, cross span, cross scale and other functions, and the winch trolley used for lifting the precast girder. Detailed parameter: Rated Loading Capacity: 1500ton Rated Lifting Moment: 15000Kn Max. Lifting Load: 1500 ton Max. Lifting Height: 60m Span: 30m to 50m Number: LG Our advantages: A. More than 50 R&D personnels with advanced Science and technology B. More than 400 sets advanced Production processing equipment and inspection equipment C. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist Packing 1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying; 2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport. Delivery 1.If the size of MTR bridge double girder launching gantry crane made in china are suitable for container ship, usually by container; 2.If the size is too big, usually by bulk ship or by container after truncation; Transport ways are based on reducing cost for you and keep the crane performance. FAQ 1.What�??s the information should I provide when inquiry about the MTR bridge double girder launching gantry crane made in china? a .we need the Bridge Drawing;the Maximum longitudinal slope and the Maximum Transverse slope; b. The Girder/beam drawing; 2.How to make highway bridge concrete girders? a.Full span prefabrication, b.Segment girder prefabrication c. Full span cast in place girder

Gantry Crane for Project is ideal for outdoor applications where lifting facilities are provided without the cost of a building or any supporting steel work. They are also suited to indoor applications where existing building structures are not suitable to take overhead cranes, Hengyuan can be constructed with a cantilever to allow handling outside the rail centers. specification: 1.Lifting capacity up to 900on 2.Span is 20m to 100m 3.Lifting height up to 100m 4.Working class: ISOA5-A7/FEM2M-4M 5.crane traveling mechanisms are operated in the driver cabin or remote control Mechanical: 1.Double box beam with steel legs moving through the ground beam as crane travelling system 2.The camber of main beam will be designed as Span*1-1.4/1000. 3.Steel Material: Q235 or Q345 4.Shot-blasting Sa2.5 for main girder and supporting beam 5.Epoxy zinc rich high quality painting. 6.Electrification and outfitting 7.Brand: CHINT SIEMENS Schneider 8.Conductor power supply: Cable Reel or busbar. 9.Frequency conversion, double speed, single speed, and All hoist and crane movements are independent an d can be run simultaneously different design duo to meet crane applications 10.Whole layout provides good protection against special working environment. Such as gas workshop

Double beam gantry crane is a kind of track traveling mid-heavy type crane, compose of bridge beam, electric trolley, traveling mechanism and electric system, suitable for where overhead runways are not practical, or in open areas where columns cannot be accommodated. Double beam gantry crane is widely used to do loading and unloading work outdoor, such as open warehouse, material stocks area, cement plant, granite industry, construction industry, and engineering industry and so on, generally equip with lifting hook, also can equipped with other lifting device for special work, like grab bucket, electromagnetic chuck, container spreader, etc. Gantry cranes can be operated from the ground via cable-connected control pendant, radio remote control or from an operator cabin, and multiple controls are possible by switching control from one mode to another. It is necessary to notice that prohibit lift high temperature liquid, flammable, explosive, corrosion and other dangerous operations. Double girder gantry crane feature * reasonable structure, box type steel welding structure, beautiful, strong and reliable * perfect performance, low cost, easy maintenance, excellent exchangeability for parts and components * smooth starting and stopping, safe and reliable traveling * widely used in open storage, stock ground, railway freight station, port and pier to load and move * crane travel mechanism adapts the separate drive * low noise, commodious cabin and good view, all the mechanism are operated in operating housing * equip with wind protection, broken shaft, rollover protection and others are all in readiness * energy saving, reduce energy consumption

ISO, CE, SGS Certificates Double Girder Gantry Crane Double girder gantry crane Application Double girder gantry crane is widely used for loading, unloading, transportation in outdoor workshop, ourdoor warehouse, stock yard, railway and freight station, construction and bridhe building, harbor and more Parameters Macx. Lifting capacity: 500 ton Span: 10- 35 m Max Lifting height: 12 m Control mode: Remoted controll, Ground control or cabin control Working duty: A5-A8 Power source: Cable or slide wire. Gantry crane Description The double girder gantry crane consist of Main beam, Support legs, Electric hoist with trolley, Motor, Reducer, Cabin, and other Electric parts. The Frame crane main beam and support legs are high quality welded steel box-shape, high intensity, rigidity, stanle, and long service life. The Cantilever arms can added the working range. The gantry crane lifting mechanism is composed by high quality electric hoist, motor, reducer, coiling block, lifting and traveling limit switch, traveling smoonthly, can emergency stop. Equip with overload protection, avoid overload damaging the hoist and gantry crane. Motor, reducer and Electric parts adopt international brand, such as Schneider, Siemens, Chint and other to ensure accurate operation, excellent performance and convenient maintenance Equip with frequency converter can be supplied to meet your demand. And, besides common hook, you also can choose other lifting tools, such as grab, electromagnetic chuck, billet clamp and container holder

Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QD model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.