Production description
European single girder overhead cranes have such design concepts as small dimension, light weight, energy-conservation and environment protection. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height higher that increases effective working space of workplace, are widely used in machinery production, assembling, petrochemicals, electric power, construction, paper making, railways building, etc.
Safety & Mechanical Features
1.European single girder overhead crane is compact lifting machinery designed and manufacturing in the strict according with FEM, DIN and ICE standard, compared with general overhead crane (bridge crane), weight is reduced by about 15-30% of common crane, max wheel pressure is reduced by about 10-30%. Have less requirement to the workshop structure, reduce production cost.
2.The frame of crane beam is square box frame, it is made by Q235 or Q345 steel plate, it has smaller body to get more lifting space.
3.Motor adopts Insulation grade F, protective grade IP54, it shall also have over heated and alarming function, the motor cover adopts aluminum alloy to drawing the molding, with better heat dissipation.
4.Germany reducer, Harden face gear, improve the bearing ability, better sealing of the shell, ensure there no grease penetration
5.Bridge crane wheel assembly are technically advanced and successfully used in different industries like steel plant, rolling mill, cement plant, fertilizer plant, paper mill, chemical industries, etc. Wheel material: ZG430-640 cast steel, 60#, 65$ 65Mn, 42CrMo, 45# or according to your demand.
6.Main electric elements adopts the international brands include Schneider, Siemens, ABB. The protective grade of electric control box shall not less than IP54.
7.This overhead crane(bridge crane) has several safe protection functions, such as up/down limit switch, overload protection, low-voltage protection and long traveling limit switch, and the cross and long traveling motors have soft start function, the crane is very easy to use.
8.This overhead crane(bridge crane) is widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment.
9.The all motions of this overhead crane are double speeds, the lifting motor is double speed type, the cross traveling motor and long traveling motor are controlled by frequency inverter.
Overhead Crane,EOT Crane,Bridge Crane,Hoist Crane,hd type european hoist electric single-girder overhead crane, China, manufacturers, suppliers, factory,low price
Single Girder Beam Bridge Overhead Crane European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working grade: A3-A5 Working temperature: -25 to +42 centigrade Three control methods: Pendent control: A. Easy operation when obervation. B. Convenient to communication with other workers. Wireless remote control: A. Greatly improved the work efficiency. B. Keep the operator from danger. Cabin room control: A.Designed by Man-machine engineering principle B.The driver seat has adjustable height and rotation. Product classification Because single girder overhead crane divides into four types, here are the detailed information, if you are interested in any one, please let us know. LDA type single girder overhad crane is widely used in warehouse, plant, matrerial stock to lift the goods. Capacity: 1ton-20ton Span: 7.5m-31.5m Lifing heihgt: 6m-18m Working with CD1 OR MD1 electric hoist European type single girder overhead crane is compact lifing manchinery designed and manufacturing in the strict accoring with FEM and DIN standard, which is advanced technology and beautiful design. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with European type electric hoist LDP single girder overhead crane belongsto very low clearance light duty equipment. Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with CD1 OR MD1 electric hoist LX single girder overhead crane is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse. Capacity: 0.5ton-10ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with CD1 or MD1 electric hoist
Overhead Crane Specification 1. Load capacity: 1 t to 50 t 2. Span: 10.5 m - 33 m 3. Lifting Height: 6 m - 20m 4. Structure: Box structure type 5. Certification: CE, ISO 9001 6. Power Supply: 380V, 50HZ, 3 Phase 7. Standard: GB/T 24001-2004 Single Girder Overhead Crane Description Single girder European overhead crane is special designed for low headroom heavy load handling application. Improved hoist trolley so that lifting mechanism and trolley traveling are at same level, saving more height for lifting. This structure highly solves the problem lifting cargo in low roof clearance workshop or warehouse. Single girder overhead crane adopts European advanced technology, designed based on international standard: FEM (Europe), DIN (Germany), ISO(International), The configurations are very advanced, such as Schneider electrical, ABM/Nord / SEW triple gear motor (three in one: motor, gear box, brake), galvanized high strength wire rope, self-adjusted disk brake, hard tooth reducer, programmable lifting limit switch, and so on. This Europe style overhead crane is of remote control with single cable "C" track festoon system; normally, we use Europe Realm (OHM) brand Compared with the general LD bridge crane, its weight is reduced about 15-30%, the maximum wheel pressure is reduced by about 10-35%, based on assimilating advanced technology,the single girder overhead crane takes modular design theories, modern computer technology, new material and technology and has features in strong rigidity, light dead weight, low power, outstanding design, save energy and environment protection. Single girder overhead crane can be applied in machinery production, assembling, petrochemicals, warehouse logistics, electric power construction, paper making and railways, etc. Single Girder Overhead Crane Feature 1. Increase the lifting height, Working in low headroom without enough space above the main girder 2. Low dead weight of computerize optimized box section 3. Aluminum alloy made drum shell, light weight, corrosion resist 4. Lifting drive units complete seal lubricate design, free maintenance 5. Traveling and lifting motors use closed type transmission gear, low noise, maintenance free 6. Modularized electrics, multiple protection, safe operation 7. Sensitive limit switch, automatically stop lifting and traveling when reach distance limit
Single Girder Overhead Crane Electric Overhead Travelling (EOT) cranes are designed and tailor made to suit any condition and site of application. The cranes are designed and manufactured strictly in accordance to National Standard considering adequate factor of safety and complying with appropriate duty of classifications. The capacity for the crane according to requirement can range from 500 Kg to 20000 Kg and the crane span spread from 7.5 Meter to 28.5 Meter. Any other requirement beyond this range can be discussed and designed to suit.
he LDA single girder overhead crane is comprised of main beam, end carriage, electric hoist, electric power transmission device and cab. Electric hoist,electricals and other parts are packed by high quality plywood crates, Main beam packed by plastic film and plastic woven cloth.
Single Girder Overhead Crane
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
Single-girder overhead traveling crane is a lifting equipment which is used for lifting materials across the workshop, warehouse and yard. Because it is located on both ends of a tall cement column or metal stent, shaped like a bridge. The single-girder overhead traveling crane's bridge runs longitudinally along the tracks laid on both sides of the overhead crane, which can take full advantage of the space under the bridge to lift the materials without being hindered by the surface equipment. It is the most widely used, the largest number of lifting machinery. Single-girder bridge crane is an important tool and equipment to realize the mechanization and automation of the production process in modern industrial production and lifting transportation. Therefore, single-girder overhead traveling cranes have been widely used in indoor and outdoor industrial and mining enterprises, steel chemical industry, railway traffic, port terminals and logistics turnover departments and places.
