Introduction: This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install. Features: This Converter has many features that enable it to perform in a superior manner. Among those features you will find: 1. Converts Coaxial or Toslink digital audio signals to analog L/R audio 2. Supports sampling rate at 32, 44.1, 48 and 96 KHz. 3. 24-bit S/PDIF incoming bit stream on left and right channels 4. Provides electromagnetic-noise-free transmission. 5. Easy to install and simple to operate. SPECIFICATIONS: Signal Inputs/Output: Input Audio : Coaxial or Toslink digital audio Output Audio: L/R audio Connector: Input audio connector: Toslink. 1XRCA(Coaxial) Output audio connector: 2XRCA R/L£© Sampling rate: 32, 44.1, 48 and 96 KHz Mechanical: Size(L-W-H): 51X41X26MM Weight (Net): 78g Warranty: Limited Warranty: 1 Year Parts and Labor Environmental: Operating Temperature: 0 to +70 Operating Humidity: 10% to 85 % RH (no condensation) Storage Temperature: -10 to +80 Storage Humidity: 5% to 90 % RH (no condensation) Power Requirement: External Power Supply: 5V DC@2A Power Consumption: 0.5 watts (max) Regulatory Approvals: Converter Unit: FCC,CE,UL Power Supply: UL,CE,FCC Accessories Adapter: AC Power Adapter: US standard, UK standard and so on User Manual: English Version. Size(L-W-H): 51X41X26MM Weight (Net): 78g.
Introduction: Wii2HDMI, a converter for the Wii console, outputs video and audio in full digital HDMI 720p or 1080p format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your HDTV/monitor. Features: * Video and audio in full digital HDMI format, no transmission loss! * Supports all Wii display modes (NTSC 480i 480p, PAL 576i). * HDMI upscale to 720p or 1080p high definition output. * Provides advanced signal processing with great precision. Colors, resolutions! * High quality, state of the art motion adaptive de-interlacing for 480i ,576i input. * No power adaptor, no messy cords¡Xjust one HDMI cable. * Hassle Free! Plug and play as you go. Specification: Dimensions: 34 x 73 x 14 mm Weight: 15g Power Consumption: below 2W Supported Video input Mode: Includes all the display modes of the Wii console (480i, 480p, 576i) Supported HDMI output Mode: 720P@60Hz, 1080P@60Hz Input Connector: Wii AV Multi Out Plug x 1 Output Connectors: HDMI Connector x 1 3.5mm Stereo Audio Jack x 1 Setups for Connecting to a TV/Monitor with HDMI Input: 1. Make sure that the Wii console is powered Off. Then insert the AV Multi Out Plug of the Wii2HDMI into the AV Multi Out Connector in the back of the Wii console. 2. Plug one end of the HDMI cable into the Wii2HDMI HDMI output, and plug the other end to the HDMI input on the TV/monitor. 3. Turn on the TV/monitor and switch the video input of the TV to match the HDMI input connector used by the Wii2HDMI. Then you should be able to see the Wii screen after you turn on the Wii console. Set the Wii Video Output to 480p Mode: Under 480p mode, the image data is double what it is under the 480i mode. Therefore, the 480p mode can provide you with much better display quality. In addition, as long as your TV/monitor has HDMI input, it is technically compelled to support the 480p mode; and even though most of the TVs/monitors support the 480i mode, it is not the usual standard. In conclusion, 480p is a better mode for higher display quality, as well as a better solution to avoid compatibility problems with TVs/monitors. Therefore, we strongly recommend that when you use the Wii2HDMI, you set the Wii video output to 480p mode. The detailed setups are as follows: 1. Make sure that the Wii console is powered off and that no disc is in the tray. 2. Power on the Wii console to reach the Wii Channel menu. Then, click on the "Wii" button on the lower lefthand side. 3. On the next screen, select the Wii Settings on the right-hand side. 4. From the Wii System Settings 1 screen, select the Screen button. 5. From the Screen screen, select the TV Resolution button. 6. From the TV Resolution screen, select the EDTV or HDTV (480p) button, and click the "Confirm" button on the lower righthand side. At this point, you should have successfully set your Wii video output to 480p mode. VERY SMALL NW: 0.06kg gw: 0.08kg 7.5cm*3.8cm*1.5cm.
Features: * It regenerates the incoming HDMI signal by decoding and re-encoding it to a new standard HDMI signal so it can extend the transimission range without degradation. * Extends 1080p/UXGA up to 40 meter transmission distance(lower resolution signal can be transimitted longer). * HDCP 1.1 compliant. * No Power, Plug and play, easy to install. Specifications: * HDMI is compliant with HDMI 1.3 * HDMI HDCP is compliant with HDCP 1.1 * Downward compatible with DVI 1.0 and HDCP 1.0 * Operation frequency up to 165MHz * HDMI data rate: 1.65G bps(Single link) * Input/Output resolution * Cable Distance Support¡GOver 40m with twisted-pair * Dimensions (WxHxD)¡G27 x 15 x 50mm. * Cable Distance Support¡GOver 40m with twisted-pair * Dimensions (WxHxD)¡G27 x 15 x 50mm.
Introduction: The HDMI Extender over ONE CAT5E/CAT6 is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing CAT5E/CAT6 cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/color) video and digital audio, with a bandwidth up to 225MHz. The HDMI Extender and receiver, over ONE CAT5E/CAT6 extender is your substantial HDMI extender tool. Features: HDMI 1.3, HDCP 1.1 and DVI1.1 Compliant. * Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality. * Cable testing showed that with 1080p resolution the HDMI input source can be 20meters away. * When transmitting a signal in 1080p resolution the CAT5E/CAT6 operating distance is 50 meters. * Supports XVYCC Specification: Frequency Bandwidth : 2.25Gbps (single link) HDMI Transmitter Input/Output Ports: 2 x HDMI Female port/1 x CAT5E/CAT6 HDMI Receiver Input/Output Ports: 1 x HDMI Female port/1 x CAT5E/CAT6 Power Supply: 5V/1A DC ESD Protection Human Body Model: 8kV (air-gap discharge) 4kV (contact discharge) Dimensions (mm): 65(W) X 100 (D) X 25 (H) Chassis Material: Aluminum Operating Temperature: 0C ~ 40C / 32F ~ 104F Storage Temperature: -20C ~ 60C / -4F ~ 140F Relative Humidity: 20~90% RH (non-condensing) Operation Controls and Functions: 1. HDMI Extender Transmitter Front Panel 1) HDMI1:HDMI1 Input port. 2) SW: Switch the HDMI1 and HDMI2 input port. 3) HDMI2:HDMI2 Input port. Rear Panel: 1) Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet. 2) LED indicator: When the DC5V power on, the Indicator will be light. 3) CAT5E/CAT6 OUT: Connect the CAT5E/CAT6 output of the transmitter with the CAT5E/CAT6 input of the HDMI over single CAT5E/CAT6 receiver. 2. HDMI Extender Receiver Front Panel 1) HDMI Out: HDMI output port. 2) LED indicator: When the HDMI input signal is locked, the indicator will be light. Rear Panel: 1) Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet. 2) LED indicator: When the DC5V power on, the indicator will be light. 3) CAT5E/CAT6 Input: Connect the CAT5E/CAT6 Input of the Receiver with the CAT5E/CAT6 output of the HDMI over single CAT5E/CAT6 Transmitter. Package: Product: SUM(PCS): Remark HDMI Extender Transmitter: 1 HDMI Extender Receiver: 1 5V DC Power Supply adaptor: 2 Operation Manual: 1: English. Dimensions (mm): 65(W) X 100 (D) X 25 (H) Chassis Material: Aluminum.
Wii2HDMI, a converter for the Wii console, outputs video and audio in full digital HDMI 720p or 1080p format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your HDTV/monitor. Features: * Video and audio in full digital HDMI format, no transmission loss! * Supports all Wii display modes (NTSC 480i 480p, PAL 576i). * HDMI upscale to 720p or 1080p high definition output. * Provides advanced signal processing with great precision. Colors, resolutions! * High quality, state of the art motion adaptive de-interlacing for 480i ,576i input. * No power adaptor, no messy cords¡Xjust one HDMI cable. * Hassle Free! Plug and play as you go. Specifications: Dimensions: 34 x 73 x 14 mm Weight: 15g Power Consumption: below 2W Supported Video input Mode: Includes all the display modes of the Wii console (480i, 480p, 576i) Supported HDMI output Mode: 720P@60Hz, 1080P@60Hz Input Connector: Wii AV Multi Out Plug x 1 Output Connectors: HDMI Connector x 1 3.5mm Stereo Audio Jack x 1.
Features: * Automatic Configuration. * Connects up to 4 HDMI / DVI displays at the same time to one video source. * Allows simultaneous display * Supports 720P, 1080i and 1080P resolutions. * Works with HDMI 1.3 compliant devices. * Works with HDCP compliant devices. Specifications: * Video amplifier speed: 6.75 Gbps. * Video amplifier bandwidth: 225 MHz. * Up to 36bit color depth. * Input video signal: 1.2 Volts p-p. * Input DDC signal: 5 Volts p-p (TTL). * HDMI connectors: type A 19-pin female. * Power supply: DC5V 3A Color packing : neutral packing.
Features: * Automatic Configuration. * Connects up to 4 HDMI / DVI displays at the same time to one video source. * Allows simultaneous display * Supports 720P, 1080i and 1080P resolutions. * Works with HDMI 1.3 compliant devices. * Works with HDCP compliant devices. Specifications: * Video amplifier speed: 6.75 Gbps. * Video amplifier bandwidth: 225 MHz. * Up to 36bit color depth. * Input video signal: 1.2 Volts p-p. * Input DDC signal: 5 Volts p-p (TTL). * HDMI connectors: type A 19-pin female. * Power supply: DC5V 3A * Dimensions: 250 x 161 x 50.5mm * Weight: 1690g.
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported Plug-and-Play installation Support Jumbo frame (64-9216 Byte) Support Voltage Monitor Support full/half duplex auto-negotiation Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX Description: 10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM. 10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel. Export standard packaging
HDMI 5 in 1 out switch Features: * switches easily between any five hdmi 1.3 sources. * maintains 480i/p, 720p, 1080i and 1080p solutions. * support hdmi 1.3(12-bit) deep color. * support hdcp compliant devices. * hdmi or dvi to hdmi cables are used to connect the inputs and switcher output. * inputs can be switched with the slim ir remote control * installs in seconds * fully hdmi 1.3 compliant * plastic shell Includes (1) 5x1 switcher for hdmi 1.3 (1) 6v dc 1a power supply (1) ir remote control (1) user manual Product dimensions: 198(l)x98(w)x24(h) Product weight(net): 0.3kg
HDMI to RJ45 converter Features: * plug and play * maintains 480i/p, 720p, 1080i and 1080p video formats * support hdmi 1.3(12-bit) deep color * support hdcp compliant devices * fully hdmi 1.3 compliant * transmit audio & video using cat5e stp cable * plastic shell *** supports 720p/1080i at distance up to 164ft ( 50meters) and 1080p 60hz at distance up to 115ft (35meters). Includes: (1) hdmi to rj45 converter-tx (1) hdmi to rj45 converter-rx (1) user manual Product dimensions(mm): 62.5(l)x52(w)x22.5(h) Product weight(net): 0.15g
Model No.: AJ-PS-50W Specifications Dimension: L159*W97*H38mm Weight: 0.5KG Input voltage: 85-130/170-264VAC Output voltage: 12VDC Output current: 4.2A Output power: 50W According to order
Model No.:AJ-WPS-5W Specifications Dimension: D58*H24mm Weight: 120g Input voltage: 110-250VAC Output voltage: 12VDC Output current: 0.42A Output power: 5W IP Rating: IP65 According to order
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback
Features: Automatic selection of optimal fusion splice program Automatic detection of fiber end face Automatic calibration of arc discharge Automatic fiber alignment function Automatic calculation of splice loss 5-inch color LCD monitor with clear digital image display Dual mode of view, separately view of X/Y axis, simultaneous view of X and Y axis Wind resistance function Intuitive operating interface and menu design Built-in battery Compact size and light weight Specifications: Parameters Specifications Applicable Fibers SM, MM, DS, NZDS Fiber Cleaved Length (mm) 12 ~ 16 (Coating Dia.: 250um) 16 (Coating Dia. 250 ~ 1000um) Fiber Diameter (um) Cladding diameter: 80 ~ 150 Coating diameter:100 ~ 1000 Fiber Count Single Fiber Aligning Method Core aligning Return Loss (dB) >60 Actual Average Splice Loss (dB) 0.02(SM), 0.01(MM), 0.04(DS), 0.04(NZDS) Splice Mode Auto & Manual Typical Splice Time (sec) 9 seconds with standard SM fiber Fusion Splice Program 12 (templet), 188 (user) Tube Typical Fusion Time 30 sec Protection Sleeve Length (mm) 60, 40, 20 Storage of Splice Result 5000 results, 3 parameters per result Tension Test (N) 2N Fiber Magnification 400X (X or Y view), 200X (X and Y view) Electrode Life 2500 times No. of Splice/Heating with Battery Typical 130 cycles with built-in Li-battery Monitor Reversible The fiber image can be turned over Display Screen 5 inch color LCD monitor Terminal RS232 Power Supply AC 100-240V with AC adapter inner Li-battery (6600mAH) Operating Condition -10 ~ +50ó¬C; 0~95%RH (no condensation); 0-5000m above sea level; Max wind velocity of 15m/s Dimensions (mm) 150(L) x 150(W) x 160(H) Weight 3.52Kg including battery
Product features Hot z-pluggable Xaui electrical interface: 4lanse@3.125gbit/s Below 2.2w power dissipation Sc-duplex optical receptacle Digital diagnostic monitor interface Very low emi and excellent esd protection Cooled 850nm vcsel laser and rosa Up to 300m for om3 fiber Operating temperature range 0ípc to 70ípc Standards X2 msa compliant Ieee802.3ae-2002 compliant Gr-253-core compliant Rohs compliant Applications 10g base-sr/sw ethernet Other optical link Remarks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty 00
Features 10gb/s serial optical interface compliant to 802.3ae 10gbase-sr Electrical interface compliant to sff-8431 specifications for enhanced 8.5 and 10 gigabit small form factor pluggable module í¦sfp+í¦ 850nm vcsel transmitter, pin photodetector 2-wire interface for management specifications compliant with sff 8472 digital diagnostic monitoring interface for optical transceivers Operatingcase temperature: 0 to 70ípc All-metal housing for superior emi performance Low power consumption Advanced firmware allow customer system encryption information to be stored in transceiver Rohs compliant 0
Features: Hot pluggable xenpak form factor Xaui electrical interface: 4lanse@3.125gbit/s Below 2.2w power dissipation Sc-duplex optical receptacle Digital diagnostic monitor interface Very low emi and excellent esd protection Cooled 850nm vcsel laser and rosa Up to 300m for om3 fiber Operating temperature range 0ípc to 70ípc Standards: Xenpak msa compliant Ieee802.3ae-2002 compliant Gr-253-core compliant Rohs compliant Applications 10g base-sr/sw ethernet Marks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty 00
AV to VGA Convertor, PC Displayer for Monitoring, RCA Input Connector : Support 1024X768 Resolution from CCD Camera to PC Displayer VGA to AV Convertor, Transmission VGA Encoding Signal by Coaxial Cable Support 1024X768, for Media -Eboard Distributed Instation
We are a professional manufacturer of membrane switch, graphic overlays, membrane circuit and the related supporting products, also produce or assemble fpc, pcb, silicone rubber & plastic, and hardware components
Elecsound is strong in types of switch. Welcome to check below series: Bottom slide switch Detector switch Hook switch Horizontal slide switch Leaf switch Micro switch Mini slide switch Multi function switch Plastic push switch Push switch Rocker switch Special function switch Tact switch toggle switch Vertical push switch Vertical slide switch Bulk