Hdmi Repeaters

10 In 1 Premium USB C Hub to 4K HDMI USB 3.0 TF VGA Adapter RJ45 Network Dock for MacBook Pro/Air USB-C 3.5mm Audio Type C

10-in-1 3*USB3.0+ PD + 1*TF + 1*SD + 1*HDMI-compatible4k + 1*Rj45 1000M+VGAï¼?1080p@60ï¼?++3.5Jack

Features:
10 in 1 Premium USB Type C Hub USB C to Multi USB 3.0 PD 3.5mm Jack TF VGA HDMI Adapter 1Gbps RJ45 Network Card for PC Computer

Specification:
â?¢ Material: All aluminum alloy with anodizing process
â?¢ Interface type: PD/USB3.0*3/3.5mm/HDMI/Gigabit Ethernet port/VGA/SecureDigital/TF
â?¢ USB 3.0 transfer rate: 5Gbps
â?¢ PD: 60W PD fast charge
â?¢ Resolution: HDMI: 4K; VGA: 1080P
â?¢ RJ45 port: 1000Mbps
â?¢TF/SecureDigital card: support simultaneous reading, compatible with micro SecureDigital/micro SecureDigitalHC/micro SecureDigitalXC, etc.
â?¢ Audio interface: 3.5mm, supports easy connection of headphones, microphone, and speaker
â?¢ Product size: 160*55.3*17.4mm/6.30*2.18*0.69"

Interface:
1*Type-c
3*USB 3.0 supports bandwidth 5Gbps
1*SD card
1*TF card
1*HDMI resolution: 4K*2K 30Hz
1*VGA resolution: 1920*1080P 60Hz
1*TYPE-C female charging port support: PD2.0 (maximum power: 60W)
1*RJ45: Maximum support: 1000M
1*3.5mm audio

Note:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.

Introduction:
This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.

Features:
This Converter has many features that enable it to perform in a superior manner. Among those features you will find:
1. Converts Coaxial or Toslink digital audio signals to analog L/R audio
2. Supports sampling rate at 32, 44.1, 48 and 96 KHz.
3. 24-bit S/PDIF incoming bit stream on left and right channels
4. Provides electromagnetic-noise-free transmission.
5. Easy to install and simple to operate.

SPECIFICATIONS:
Signal Inputs/Output:
Input Audio : Coaxial or Toslink digital audio
Output Audio: L/R audio
Connector:
Input audio connector: Toslink. 1XRCA(Coaxial)
Output audio connector: 2XRCA R/L£©
Sampling rate: 32, 44.1, 48 and 96 KHz
Mechanical:
Size(L-W-H): 51X41X26MM
Weight (Net): 78g
Warranty:
Limited Warranty: 1 Year Parts and Labor
Environmental:
Operating Temperature: 0 to +70
Operating Humidity: 10% to 85 % RH (no condensation)
Storage Temperature: -10 to +80
Storage Humidity: 5% to 90 % RH (no condensation)
Power Requirement:
External Power Supply: 5V DC@2A
Power Consumption: 0.5 watts (max)
Regulatory Approvals:
Converter Unit: FCC,CE,UL
Power Supply: UL,CE,FCC
Accessories Adapter:
AC Power Adapter: US standard, UK standard and so on
User Manual: English Version.




Size(L-W-H): 51X41X26MM
Weight (Net): 78g.

Introduction:

Wii2HDMI, a converter for the Wii console, outputs video and audio in full digital HDMI 720p or 1080p format and supports all Wii display modes (NTSC 480i 480p, PAL 576i). With just one HDMI cable, plug and play for true-to-life video/audio effects on your HDTV/monitor.

Features:
* Video and audio in full digital HDMI format, no transmission loss!
* Supports all Wii display modes (NTSC 480i 480p, PAL 576i).
* HDMI upscale to 720p or 1080p high definition output.
* Provides advanced signal processing with great precision. Colors, resolutions!
* High quality, state of the art motion adaptive de-interlacing for 480i ,576i input.
* No power adaptor, no messy cords¡Xjust one HDMI cable.
* Hassle Free! Plug and play as you go.

Specification:
Dimensions: 34 x 73 x 14 mm
Weight: 15g
Power Consumption: below 2W
Supported Video input Mode: Includes all the display modes of the Wii console (480i, 480p, 576i)
Supported HDMI output Mode: 720P@60Hz, 1080P@60Hz
Input Connector: Wii AV Multi Out Plug x 1
Output Connectors:
HDMI Connector x 1
3.5mm Stereo Audio Jack x 1

Setups for Connecting to a TV/Monitor with HDMI Input:
1. Make sure that the Wii console is powered Off. Then insert the AV Multi Out Plug of
the Wii2HDMI into the AV Multi Out Connector in the back of the Wii console.

2. Plug one end of the HDMI cable into the Wii2HDMI HDMI output, and plug the other end to the HDMI input on the TV/monitor.

3. Turn on the TV/monitor and switch the video input of the TV to match the HDMI
input connector used by the Wii2HDMI. Then you should be able to see the Wii screen after you turn on the Wii console.

Set the Wii Video Output to 480p Mode:
Under 480p mode, the image data is double what it is under the 480i mode. Therefore,
the 480p mode can provide you with much better display quality. In addition, as long as your TV/monitor has HDMI input, it is technically compelled to support the 480p mode; and even though most of the TVs/monitors support the 480i mode, it is not the usual standard. In conclusion, 480p is a better mode for higher display quality, as well as a better solution to avoid compatibility problems with TVs/monitors. Therefore, we
strongly recommend that when you use the Wii2HDMI, you set the Wii video output to 480p mode. The detailed setups are as follows:

1. Make sure that the Wii console is powered off and that no disc is in the tray.
2. Power on the Wii console to reach the Wii Channel menu. Then, click on the "Wii" button on the lower lefthand side.
3. On the next screen, select the Wii Settings on the right-hand side.
4. From the Wii System Settings 1 screen, select the Screen button.
5. From the Screen screen, select the TV Resolution button.
6. From the TV Resolution screen, select the EDTV or HDTV (480p) button, and
click the "Confirm" button on the lower righthand side. At this point, you should have
successfully set your Wii video output to 480p mode.



VERY SMALL
NW: 0.06kg
gw: 0.08kg
7.5cm*3.8cm*1.5cm.

Introduction:
The HDMI Extender over ONE CAT5E/CAT6 is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing CAT5E/CAT6 cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/color) video and digital audio, with a bandwidth up to 225MHz. The HDMI Extender and receiver, over ONE CAT5E/CAT6 extender is your substantial HDMI extender tool.

Features:
HDMI 1.3, HDCP 1.1 and DVI1.1 Compliant.
* Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality.
* Cable testing showed that with 1080p resolution the HDMI input source can be 20meters away.
* When transmitting a signal in 1080p resolution the CAT5E/CAT6 operating distance is 50 meters.
* Supports XVYCC

Specification:
Frequency Bandwidth : 2.25Gbps (single link)
HDMI Transmitter Input/Output Ports: 2 x HDMI Female port/1 x CAT5E/CAT6
HDMI Receiver Input/Output Ports: 1 x HDMI Female port/1 x CAT5E/CAT6
Power Supply: 5V/1A DC
ESD Protection Human Body Model: 8kV (air-gap discharge) 4kV (contact discharge)
Dimensions (mm): 65(W) X 100 (D) X 25 (H)
Chassis Material: Aluminum
Operating Temperature: 0C ~ 40C / 32F ~ 104F
Storage Temperature: -20C ~ 60C / -4F ~ 140F
Relative Humidity: 20~90% RH (non-condensing)

Operation Controls and Functions:
1. HDMI Extender Transmitter
Front Panel
1) HDMI1:HDMI1 Input port.
2) SW: Switch the HDMI1 and HDMI2 input port.
3) HDMI2:HDMI2 Input port.
Rear Panel:
1) Power: Plug the 5VDC power supply into the unit
and connect the adaptor to AC wall outlet.
2) LED indicator: When the DC5V power on, the
Indicator will be light.
3) CAT5E/CAT6 OUT: Connect the CAT5E/CAT6
output of the transmitter with the CAT5E/CAT6 input
of the HDMI over single CAT5E/CAT6 receiver.

2. HDMI Extender Receiver
Front Panel
1) HDMI Out: HDMI output port.
2) LED indicator: When the HDMI input signal is locked,
the indicator will be light.
Rear Panel:
1) Power: Plug the 5VDC power supply into
the unit and connect the adaptor to AC wall outlet.
2) LED indicator: When the DC5V power on,
the indicator will be light.
3) CAT5E/CAT6 Input: Connect the CAT5E/CAT6 Input of the Receiver with the CAT5E/CAT6 output of the HDMI over single CAT5E/CAT6 Transmitter.

Package:
Product: SUM(PCS): Remark
HDMI Extender Transmitter: 1
HDMI Extender Receiver: 1
5V DC Power Supply adaptor: 2
Operation Manual: 1: English.



Dimensions (mm): 65(W) X 100 (D) X 25 (H)
Chassis Material: Aluminum.