Optcore Technology Co

Product features
Hot z-pluggable
Xaui electrical interface: 4lanse@3.125gbit/s
Below 2.2w power dissipation
Sc-duplex optical receptacle
Digital diagnostic monitor interface
Very low emi and excellent esd protection
Cooled 850nm vcsel laser and rosa
Up to 300m for om3 fiber
Operating temperature range 0ípc to 70ípc

Standards
X2 msa compliant
Ieee802.3ae-2002 compliant
Gr-253-core compliant
Rohs compliant

Applications
10g base-sr/sw ethernet
Other optical link

Remarks:
Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link.
3 years warranty


00

Features
10gb/s serial optical interface compliant to 802.3ae 10gbase-sr
Electrical interface compliant to sff-8431 specifications for enhanced 8.5 and 10 gigabit small form factor pluggable module í¦sfp+í¦
850nm vcsel transmitter, pin photodetector
2-wire interface for management specifications compliant with sff 8472 digital diagnostic monitoring interface for optical transceivers
Operatingcase temperature: 0 to 70ípc
All-metal housing for superior emi performance
Low power consumption
Advanced firmware allow customer system encryption information to be stored in transceiver
Rohs compliant


0

Features:
Hot pluggable xenpak form factor
Xaui electrical interface:
4lanse@3.125gbit/s
Below 2.2w power dissipation
Sc-duplex optical receptacle
Digital diagnostic monitor interface
Very low emi and excellent esd protection
Cooled 850nm vcsel laser and rosa
Up to 300m for om3 fiber
Operating temperature range 0ípc to 70ípc

Standards:
Xenpak msa compliant
Ieee802.3ae-2002 compliant
Gr-253-core compliant
Rohs compliant

Applications
10g base-sr/sw ethernet

Marks:
Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link.
3 years warranty



00

APT-103M22CC Optical media module

1.According with ieee802.3 ieee802.3u ieee802.3x
Ieee802.1q 100base-tx 100base-tx 100base-fx standard.
2.Afford tcp/ip, pppoe, dhcp, icmp, nat protocol.
3.Flow control:full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard.
4.Electric port support auto-negotiation function, autoconditioning transmit mode and transmit speed.
5.Port supply auto-mdi/mdix automatic reverse.
6.Support storage transmit mode.
7.Support electric port's 10m 100m mode and self-adapt mode to switch.
8.Afford the state indicator, external power(output 5v~50hz 1a)
9.Interface:electric port:rj-45 fiber port:sc
10.Twisted-pair:cat5 cat6
11.Multimode fiber: 50/125, 62.5/125um
12.Working temperature:0~50 degree
13.Storage temperature:-20~70 degree
14.Humidity:5%~90%(noncondensing)
Connect type: sc
Fiber type: multimode
Wavelength: 1300nm
Typical distance: 2km
Min tx pwr: -19.0dbm
Max tx pwr:-14.0dbm
Sensitivity:-31.0dbm
Link budget:12.0dbm

Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter

SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.

Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback

Description:
The Media Converter ( TR100-LD13/LD15 , TR1000-LD13/LD15 , TR100-L13 , TR1000-L13 ) series consists of a series of 10/100Base-TX to 100Base-FX Auto-negotiation mode Media Converter. User now may upgrade or extend their existing 100Base-TX or even 10Base-T network into fiber network easily.
The Media Converter ( TR100-LD13/LD15 , TR1000-LD13/LD15 , TR100-L13 , TR1000-L13 ) series are fully compliant with IEEE802.3 Ethernet standard. The RJ45 (STP) port of TR100 support auto-negotiation functions, provide a maximum bandwidth of up to 200Mbps (100M full duplex) or up to 20Mbps (10M, full duplex) for distances of up to 2Km - when using multimode fiber cable; or up to 100km - when using single-mode fiber cable. Installation and operation of the TR100-LD13(15) / TR1000-LD13(15) is simple and straightforward.


14*14*24 CM.

Technical parameter
1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx
2.Connectors:(rj45-utp and fiber sc)
3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100.Tx100
4.Data tranfer mode: 10/100mbps
5.Duplex mode :full or half duplex mode
6.Power requirement:ac 100-260v dc1a +5v
7.Ambient temperature:0 - 70degree
8.Humidity:5% - 90%(noncondensing)
9.Dimenstons:26*71*97mm
10.Cable:cat.5 utp cable
11.Fiber: multi-mode
Specification
Connector type: sc
Typical distance: 60km
Fiber type: singlemode
Wavelength: 1310nm
Min tx pwr: -5.0dbm
Max tx pwr: -1.0dbm
Sensitivity: -35.0dbm
Link budget: 29.0dbm

SFP Slot 10/100/1000M Optic Media Converter
pls contact us for more details
info[at]hongkien[dot]com
10/100/1000Base-TX to 1000Base-FX Converter
Standards: IEEE802.3 IEEE802.3U, 10/100/1000Base-TX, 1000Base-FX
Interface: 1x RJ-45 connector 1x SFP Slot
Flow Control: TEEE802.3x Flow control for full duplex mode.
Back-pressure flow control for half duplex model


call

Media converter

Parameter
Specifications
Access mode
10/100mbps
Standard
Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m
Port
One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm)

Conversion mode


Medium conversion, storing and forwarding

Mac address table


I k

Buffer space


1mbit

Flow control


Full duplex state: flow control; half duplex state: back pressure mode

Delay


9.6us

Bit error rate


<1/1000000000

Mtbf


100, 000 hours

Led


Power tx link ( fiber link action ), tp link1000, tp link100, tp act ) fdx (fx full duplex mode), fx100 (fiber, with a transmission rate of 100m) tp1/2/3/4 link/act (1/2/3/4-port twisted pairs connection action) tp1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100m)

Power


Ac220 0.5a/pc-48(builtin)

Power consumption


5w

Operating temperature


-10~55ºc

Operating humidity


5%~90%

Storage temperature


-40~70ºc

Storage humidity


5%~90% (non-condensing)



Dimensions


140mm * 111 * 30mm(in) 95 x 70 x 26mm(out)