Description The trough feeder used for feed massive material to receiving machinery from hopper, it is widely used to feed large size material (undressed ore and so on) into primary crusher of metallurgy, mine, chemical industry, building, dressing, coal ,and so on. Main Technical Parameters Model Entrance size (mm) Exit size (mm) Swinging (mm) Swinging frequency (mm) Max Particle size(mm) Productive capacity (t/h) Motor (kw) Weight (kg) 400*400 400*400 400*400 12 18.2 100 25-30 1.1 535 600*500 600*500 600*500 10-50 38.9 200 10-50 4 1054 980*1240 980*1240 900*800 20-50 23.7 350 36-90 7.5 1676
Description Rock hammer crusher can crush ore which is below 50mm or the tailings, middlings which in the uncompleted ore. And break up the useful metal from the ore, depending on the requirement of factory, it can crush the mineral particles in 1 to 180 mesh, and separate them in the shaking table. They are suitable for the small factory, and same times can take place of ball mill in some degree, Easy installation, easy operation, less investment, fast effect. The rock hammer crusher consist of rotor which with hammer, and the rotor consist of spindle, disk, pin and hammer. The motor drives the rotor to rotate at a high speed through the belt, the material enter the machine through the feeding port the rotating hammers with high rotation speed are crushing them, the small size mineral was discharge through the sieve and the large size still was crush and beat in the sieve until the crushed products meeting the required size can be discharged by the outlet and become the final products. Main Technical Parameters Model Capacity (T/h) Feeding Size (mm) Discharge Size (mm) Power at user option Motor (Kw) Diesel 200 500 1-2 50 1.8 15-18 24 300 500 3-6 50 1.8 18-22 30 400 600 5-10 50 1.8 25-30 45
Saw-tooth Wave Laboratory Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Advantages and Characteristics 1 High capacity 2 High concentration ratio and high recovery 3 Easy to install, operate and maintain 4 The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling 5 Saving water 30-40% than ordinary jig 6 The pulsation speed very easy adjusted by regulator 7 Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc Main Technical Parameters Model Hutch Diaphragm Feeding Size (mm) Makeup water (m3/t) Makeup water pressure (Mpa) Capacity (t/h) Power (kw) Dimensions (mm) Weight (Kg) Shape Area (m2) Stroke (mm) Frequency of stroke (r/min) JT0.57-1 Trapezoid 0.57 8.5 12 10 17 12-21 80-180
DescriptionsDouble deck shaking table is widely used for tungsten, tin, tantalum and niobium, gold, iron, manganese and other metals, ferrous metals, nonferrous metals, precious metals and other minerals and coal sorting. Traditional shaker covers an area of large, relatively low processing capacity,cost increases, double-shaker covers an area of inconvenience to deal with a large amount of equipment, low cost, Shaker is available in the double-sweep the election, featuring various operations, sorting coarse sand (2-0.5 mm), fine sand (0.5-0.74), sludge (0.074) different grain level, The same bed with hyperbolic rocker mechanism, the spring box in the shaker box, the crankshaft, rod, springs, rocker and so increase the size, material unchanged. The lower bed sharing a set of lower bed slope adjustment device used in shake liner support. Technical Specifications Model Unit DL4500/1850 DL3000/1320 Bed Size mm 4500/1850/1560 3000/1320/1100 Stroke mm 6-8 6-8 Frequency of stroke /min 240-380 210-320 Slope o 0-10 0-10 Feed size mm 0.02-2 0.02-2 Feed density % 10-30 10-30 Water t/h 0.8-1.4 0.6-1.2 Power kw 1.5 1.5 Capacity t/h 2.5-3.5 (coarse sand) 2.5-3 (coarse sand) t/h 1.6-2.5 (find sand) 0.8-2.5 (find sand) Overall dimensions mm 5600/1850/1560 4100/1320/1560 Weight kg 1650 1550
XFG series hanging cell flotation machine is used in the geological, metallurgical, building materials, chemical industry, mining and scientific research institutions, laboratory for stirring scrubbing, separating and cleaning minor samples. It uses the technology of frequency conversion stepless speed regulation, impeller, digital display, accurate adjustment.
1. Product performance standards: api 8a and sy / t5235. 2. Environmental conditions used sucker rod elevator A) allows the use at a temperature of -18, ~ 70, . B) meet the harsh conditions of oil field operations. 3. Sucker rod elevator's types: reed. 4. Material requirements: kava body is made of high-quality high-strength steel, handles made of high quality alloy forged steel. 5. Sucker rod elevator main technical parameters: A) applicable rod outer diameter: 5 / 8in ~ 1 1 / 8in. B) maximum load: 15t (135kn), 25t (225kn). 6. Sucker rod elevator major quality control requirements: 1) the chemical composition of each batch of material compliance with the relevant standards. 2) body 10% radiographic flaw detection, high stress area to meet the requirements of grade â?¡ gb / t5677, the remaining parts of the meet gb , level requirements / t5677's. 3) mechanical properties body of not less than: rm, 640 pma, rp0.2, 540 pma, z, 15%, a, 25%, akv, 42j (-20, ). 4) product 10% for 1.5 times the testimony load test. 5) all parts for magnetic particle testing, high stress area to meet the requirements of grade â?¡ gb / t9444, the remaining parts of the meet gb , level requirements / t9444's. 6) the main products from raw materials to the carrier using the site dating back the whole process. 7. Sucker rod elevator structure diagram and parts list below: Cdq (s) sucker rod elevator structure diagram.
Api 9a drilling wire line rope Construction: 1x3;1x7;1x12;1x19;6x7+fc/iwrc ;6x12+7fc;6x19+fc/iwrc;6x24+7fc;6x37 6x25fi+fc/iwrc;6x26ws;6x36+fc/iwrc, ws;8x19s+fc/iwrc;19x7 Quality assurance system: A. Strict selection of domestic high-quality hard-line to control theh product quality : using domestic the best materials, such as bomco wire rope company and shagang group. B. Perfect rod testing equipment: spectrometer, tensile testing machine, metallographic analyzer, high and low times metallographic analyzer.Testing for detection rod into the plant chemical costs, tissue properties and mechanical properties. C. With perfect wire rope and wire rope testing equipment: medium and small tensile testing machine, torsion testing machine, bending test machine, steel strands-tension fatigue testing machine, wire bending fatigue testing machine, fatigue testing Machine wire rope, wire rope pre-tensioning equipment, etc, we can test the the performance of wire rope. D. Wire rope production process using the advanced north america, germany management models. Meanwhile, the introduction of technology also brings the foreign advanced production organization and management mode such as quality track record, pre-production equipment, tooling, mold and other inspection records, processing management. E. Product organizational processes in according to gb/t19001 and apispecq1 for quality control. F. Corresponding to each batch of steel wire rope in accordance with rigorous testing standards, including process and final inspection. G. Approved by the american petroleum institute api monogram. And had passed the iso9000 certification.
Product Description BOP parts that we supply all come from original manufacturers, they are 100% interchangeable. BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. APPLY TO BELOW BOP: Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Technical parameter Specification: 1. Standad: API 16 A and ISO 9001 2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa) 3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm) 4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram 5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP 6.Brand:Shenkai and Rongsheng. 7.Imitate: Camaron and Shaffer 8.U type and SH type Characters of BOP pare parts: In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks. Blowout preventer with spherical plastic core and dust-proof ring. Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use. Working of BOP pare parts: When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Downhole well drilling tool Roller reamer The Roller Reamer is designed for various reaming operation but particularly for various reaming operation but particularly for stabilization purpose when drilling in very abrasive formations. It will fit hole sizes ranging from â??6 to 28â?�. In addition, each body by simple adjustment of blocks and proper selection of cutters, will suit a wide range of hole sizes. Three different types(T, F, and B) of cutters are offered: Type T: Milled, machined with hardfaced sharp teeth for soft formations. Type F: Milled, machined with hardfaced flat teeth, for medium hard formations. Type B: Equipped with pressed-in tungsten carbide buttons, for hard formations.
Aimed at pump rod break, stripping, piston dropping without opening oil drainage unit during operation of oil well, no ordinary oil drainage achievement in heavy oil and paraffin troubled well, environment pollution and so on, rotary oil drainage unit is the patent product (patent no. Zl2005200845803) specially designed and developed. It has advantages of simple structure, easy operation and reliable oil drainage,
Product overviews Double slip connector is a tool to quickly connect downhole tools to coiled tubing. Double slip connector is different from conventional connector, double slip lock rings make sure the tool lock to the coiled tubing, no need for buckle. Two slip rings can share the load and improve the reliability, two o-rings to seal tubing string. Advantages Easy to installation, and quick to connect. The slip lock ring is special designed, which improves the reliability Large load capability Double o-ring seal Functions Double slip connector suit for all coiled tubing downhole tools Load high torque, can connect to mud motor High strength connection application Remove one rock ring as single connect
Feed opening (mm):200*350 Max.Feeding size (mm):180 Adjusting range of discharge opening (mm):18-70 Processing capacity (t/h):3-10 Rotation speed of eccentric shaft (r/min):260 Motor power (kw):11 Total weight (t)1.5 Dimensions(l*w*h)(mm)1000*870*990
Performance characteristics: Bag Filter is widely applied for dust collection applications in mining industry, chemical industry, pharmaceutical industry, and the production of flour, glass, metallurgy, mine, cement, building materials, etc. The bag filter is made up of the top chest, middle chest, bottom chest, dust exhauster, and jet cleaning system. There is spray tube and air outlet at the top chest. The middle box consists of perforated plate, venturi tube, filter bag, keel, pulse valve and gas cleaning system. The bottom chest is comprised of ash bucket, air inlet, access door, ash exhauster (which is composed of rotary dust valve or spiral conveyer) It could be made of carbon steel or stainless steel upon request. Dust collector is generally used with a temperature less than 12C. Customized dust collector for usage at high temperatures (less 23C) is also available.
This rotary cooler equipment can quickly cool higher-temperature of granular compound fertilizer directly Approximately to normal atmospheric temperature, which is convenient for timely and quick packing and Prevents compound fertilizer from forming block during store. It can achieve adverse Flow cooling, which can reduce pollution and improve working environment. It has many characteristics such as reasonable structure, stable run, strong adaptability etc.. Features of cooler: 1.High cooling efficiency 2.Simple structure, low rate malfunction, convenient operation, low cost of maintenance, stable operation. 3.Wide usage, can be used for the drying of different materials in powder, granule, strip, lump, large elasticity Of operation. Output is allowed to have larger fluctuations in manufacturing, but not allowed to influence the Quality of the products. 4.Easy to install and remove Application range of cooler: 1. Chemical industry: ammonium sulfate, sodium sulphide, anfu powder, ammonium nitrate, Urea, oxalic acid, bichromate potassium, pvc, nitrophosphate fertilizer, fytic acid, Phosphate compound fertilizer. 2. Food industry: glucose, salt, sugar, vitamin malted milk, granular sugar. 3. Mining products: ceramic sand , coal, coal slime, manganese ore, limestone, pyrite, peat, etc. 4. Others: iron powder, flat soybean
Performance characteristics: Bag Filter is widely applied for dust collection applications in mining industry, chemical industry, pharmaceutical industry, and the production of flour, glass, metallurgy, mine, cement, building materials, etc. The bag filter is made up of the top chest, middle chest, bottom chest, dust exhauster, and jet cleaning system. There is spray tube and air outlet at the top chest. The middle box consists of perforated plate, venturi tube, filter bag, keel, pulse valve and gas cleaning system. The bottom chest is comprised of ash bucket, air inlet, access door, ash exhauster (which is composed of rotary dust valve or spiral conveyer) It could be made of carbon steel or stainless steel upon request. Dust collector is generally used with a temperature less than 120C. Customized dust collector for usage at high temperatures (less 230C) is also available.
NE Plate Chain Elevator takes advanced technology from home and abroad. This products is suitable for vertical transportation of powder, granular, and bulk materials, also for high hardness materials. The temperature of materials should not be higher than 200 degree celsius. Max. Elevation height 40m. Advantages: Wide range of elevating height. Strong capacity and small driving power. Feeding materials by automatic flowing and discharge through gravity induction. Long service life and good leak tightness. Stable and liable operation, easy maintenance. Low running cost. Bucket elevator The description of bucket elevator: Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets (or cups) dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat. Bucket elevator can be divided into belt type and chain type, and the common characteristic is used for vertical transportation of powder, granulated and small lump materials. It has compact structure, small covering area, large hoisting height, good sealed performance. Tape bucket conveyor is lightweight, flexible, simple handling maintenance and low noise, which can be used to transport density 1.5 t/m3 granular or small conveying of bulk materials. Advantage of Bucket Elevator: The bucket conveyor has the advantages of big conveying capacity, high hoisting height, stable and reliable running and long service life. The machine is applicable for the crushed materials, and block materials, such as coal, cement, block, sand, clay and ore. The bucket elevator is allowed to convey materials with high temperature when armed with special circle chain tructure. Henan Zhengzhou Mining Machinery Co., Ltd. Specializes in manufacturing bucket elevator. Henan Zhengzhou Mining Machinery Co., Ltd. Designs and manufactures a wide variety of bucket elevators based on the characteristics of the bulk material and the process requirements. Designed to handle a wide variety of bulk materials from average to very free-flowing. Welcome to consult and order.
Gz series electromagnetic vibrating feeder Vibrating feeder is widely used in crushing, screening production line of mining, cement, metallurgy, building materials, chemical, mineral processing, coal mining and industries. The vibrating feeder is used to mine material from a storage silo or other material storage equipment in uniform or quantitative supply to the equipment of subject material, and is the necessary equipment to practice routine automation. Introduction of the vibrating feeder: Gz series electromagnetic vibrating feeder mainly used for mining, metallurgical, chemical, coal, machinery and other industries in to the accepting machine. Being diversification, this series of products can be specially designed and produced according to the customers' need. Furthermore, all types of electromagnetic vibration feeder can be easily implemented manual or automatic control. Henan zhengzhou mining machinery co., ltd. Is a large professional manufacturer of vibrating feeder. We can provide our customer with a good consultant and assistant, to ensure our customer's investment will be rewarded with great profit. At the same time, select the right model of equipment for customer. To meet our customer's special needs, we can design and develop customized products.
Introduction: PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material. PF Series Impact Crusher is mainly used in secondary crushing, and can crush material o f crushing compression strength no more than 320 Maps. It is suitable to produce high rank highway, hydroelectric and building material and such industry as stone. (1)Even crushing function of multi-cavities which is suitable to crush hard material. (2)Reasonable design of leveling plate making the finished material finer and cubic-shaped without internal cracks. (3)Low and big feed opening make the production line easy to arrange and increase the size of feeding material. (4)Hydraulic start-up which is convenient for maintenance and replacement of wear-parts. (5)New anti-abrasive material which prolong service life of impact hammer, impact plate and liner. Advantages: 1 Large feeding port and high crushing cavity, suitable to crushing the material with high hardness and big grain size, and less powder. 2 The gap between impact plate and hammer plate is adjustable, so the discharging grain size can be effective control and the grain shape is well. 3 The hammer, impact plate and lining plate are made of new type abrasion-proof material with long working life and impact protection, wear protection. 4 Because of the function of three-stage crushing and plastic, so the crushing ratio is high, and the product shape is cube and can optional crushing. 5 The multi-function hydraulic station has many function of hydraulic discharge gap with high speed, impact plate stable vibration and the body open automatically.
Gas Burner is research and developing for rotary kiln that burning with single or various gas fuel, which not only ensure all the advantages and specificity of four-channel burner, but also enhance the application of burning. The burner have special structure and reasonable technical parameters, guarantee the gas fuel fully mixing with air, primary air and secondary air, which to ensure stronger heating intensity, higher burning efficiency, easier adjustment. Burner can be applicable for various metallurgy and chemical rotary kiln. Application Burning System for Rotary kiln on industry fields like Power, Chemical, Metallurgy, Building material etc. Its special advantages as follows: 1.Stability flame with regular flame shapes, no phenomenon like fluctuation and sweep kiln liner, that will outstanding extend the life time of kiln liner. 2.Good mixing performance with gas fuel, primary air and secondary air, burning abundantly, that can be enhance heating intensity and reduce primary air proportion at same time, then will improve kiln capacity and reduce energy consumption. 3.No strong eddy between flame and bowl effect produced by flame cover, can avoid appearance of temperature peak and make evenly distribution of flame temperature, then effectively protect cylinder and guard plate of kiln inlet. 4.Due to more fully mixing with combustion air and fuel gas, the burning will be more quickly and fully, which will reduce the content of CO and NOX from kiln inlet, but also better for safety operating and realizing green production. 5. The nozzle has made by special material with advantages like heat-resistance and easy to change. 6.Simple operation and adjustment. When operating, erupt speed of each air pipe can be change via adjust sectional area, then will realize goals like adjustment of flame shape and strength. Gas Burner is mainly composed with Pipe, Nozzle, Ignition device, Metal corrugated compensator, Butterfly valve, Pressure measurement and Protection layer etc. The mainly features are: 1. Pipeline From outside to inside respectively, the pipeline has consist of Axial wind channel, Swirling wind channel, Gas wind channel, central wind channel and ignition channel. And the ignition is just for igniting, so called four-channel burner. 2. Nozzle Nozzle made by special material, spray mouth sectional area of axial wind channel, swirling wind channel and gas wind channel are adjustable, so that can adjust the spray speed of each channel. The nozzle is the key part to ensure flame shape. 3.Ignition Device Located in the central wind channel, used for automatic igniting. 4.Metal Corrugated Compensator Which is the key part to connect each channel, sealing and adjust flame shape, and allowed process axial movement with connected channel.
Advantages of magnetic separator: 1)Newest CTB series magnetic separator In China 2)Simple structure, high yield; 3)Covenient operation; 4)Granularity blow 0.5m Application of magnetic separator: Newest STB Series magnetic separator In China. This series of products is used in wet magnetic separation of materials with granularity below 3mm like magnetite, pyrrhotine, bake ore and washingtonite. It is also used for deironing materials like non-metal ores, coal and building materials. Average magnetic induction of barrel surface is 100-600mT. According to customer's demands, it can provide magnetic separation with different magnetic induction like forward flow, semi counter flow and counter flow. The products have features, such as simple structure, high yield, convenient operation and easy maintenance. Characteristics of Magnetic separator: The products have geatures, such as simple structure, high yield, convenient operation and easy maintenance.
