Rock Hammer Crusher

Description Rock hammer crusher can crush ore which is below 50mm or the tailings, middlings which in the uncompleted ore. And break up the useful metal from the ore, depending on the requirement of factory, it can crush the mineral particles in 1 to 180 mesh, and separate them in the shaking table. They are suitable for the small factory, and same times can take place of ball mill in some degree, Easy installation, easy operation, less investment, fast effect. The rock hammer crusher consist of rotor which with hammer, and the rotor consist of spindle, disk, pin and hammer. The motor drives the rotor to rotate at a high speed through the belt, the material enter the machine through the feeding port the rotating hammers with high rotation speed are crushing them, the small size mineral was discharge through the sieve and the large size still was crush and beat in the sieve until the crushed products meeting the required size can be discharged by the outlet and become the final products. Main Technical Parameters Model Capacity (T/h) Feeding Size (mm) Discharge Size (mm) Power at user option Motor (Kw) Diesel 200Ã?500 1-2 â?¤50 â?¤1.8 15-18 24 300Ã?500 3-6 â?¤50 â?¤1.8 18-22 30 400Ã?600 5-10 â?¤50 â?¤1.8 25-30 45 Rock Hammer Crusher

Rock Crusher Hammer Mill The Rock Crusher Hammer Mill is an extremely durable and affordable rock crusher designed to crush ore into a fine powder to release or release gold (or other valuable minerals). PCX series is an integrated crushing and shaping machine. Through the design of adjustable movable lining plates and material self-flow trough, it can realize impact crushing, impact shaping and self-flowing material, changing the two-stage crushing into one-stage crushing. It can be used as the second-stage crushing in large production lines. Crushing and shaping.

Stone hammer crusher application: this series of stone hammer is applicable crushing of brittle minerals, such as coal, salt, plaster, alum, brick, tile and limestone with compression strength no more than 100mpa and humidity no more than 15%. Pc hammer crusher introduction:this series of machine broke materials through the high-speed rotating hammer body and collision the material surface, it has a simple structure, large crushing ratio, high production efficiency and other characteristics, it can be used for dry and wet two forms crushing, it applies to mining, cement, coal, metallurgy, building materials, roads, fire and other departments chronology medium hardness and brittle materials. The device can change material particle size and adjust gap of article grate in accordance with user requirements, so it can meet different users Structural characteristics: stone hammer crusher has compact frame, reasonable layout, easy installation, good maintainability, simple operation. Particularly, it excellently adapts the layout of cement production process, save the space of process layout. With special structural characteristics, that is having big materials ratio etc. Stone hammer crusher is divided into ordinary hammer crusher and ring hammer crusher respectively. Ring hammer crusher generally used in coal, coke and other industries. Ordinary hammer general english prefix is expressed by pc, used pch english prefix that usually is ring hammer crusher.

The hammer crusher (hammer mill) has good quality features like simple structure, high reduction ration, high efficiency, and etc. The pc hammer crusher (hammer mill) is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. Operating principle of hammer crusher: The motor drives the rotor rotated of the hammer crusher at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working chamber of hammers, they are crushed by the rotating hammers with high rotation speed, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, while the large size products are brought back to the crushed area by the hammers for being recrushed until they reached the required size. In bulk or container.

The hammer head is made of AMC composite material which is at international level and is developed by our company independently. The life of super hammer head branded as "Big Gold Teeth" is 50-150% longer than that of hammer made from Mn18Cr2MoNbRe. The reconstruction of crushing cavity with our patent of "stone strike stone" greatly increases the self-breakup rate of stones, which efficiently reduces the load of grate-shoe and hammer head. The technology of WHM two-step super hard surface interspersed welding is introduced for the rotor. The life of weld beadis over two times than that ordinary anti-abrasion welding rads. The main shaft is made of military gun steel with high strength the steel is made by means of vacuum double refining, whose strength is 4-5 times higher than that of ordinary shaft. New design of grate-shoe. The shones flow smoothly and stably. The size of stone is fine and even. The life of wall plate is long. Features Stones stricken by stones crushing cavity Hammer head is wearable Intensity of principal axis is higher Discharging granularity is fine and equality Easy maintenance Relialbe operation.

Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum, bricks, tiles, limestone, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also applied instead of cone crusher. Performance and features: Hammer crusher has the advantages of high product capacity, high crushing ratio, low power consumption, uniform products partial size, simple structure, compact and light, low investment cost, easy to management, etc. The defects are: when crushing very hard materials, it will cause greater wear of hammer and grate and consume more metal; it needs more maintenance time and uniform feeding of materials; when crushing soft-moist materials, the capacity will become significantly lower and even stop because of material jam. In order to avoid jam, the moisture content of materials should be less than 10%-15%. Model PC400x300 Rotor diameter (mm) 400 Rotor length (mm) 300 Rotor speed (r/min)1100 Max. feeding size (mm)

Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100mpa. Such as coal, salt, chalk, gypsum, bricks & tiles, limestone, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also is applied instead of cone crusher.

Capacity:3-45t/h Feeding size: