Thermal Conductive Polyimide Kapton PI Film Descriptions: Thermal Conductive Polyimide Kapton PI Film also call thermal conductive kapton film,it is a thermally conductive film, possesses higher thermal conductivity properties than standard polyimide film. This property makes it ideal for applications requiring efficient thermal energy transfer, such as loudspeaker voice coils frame, electrical insulating pads and flexible printed circuit board. Moreover it also can offer an excellent combination of electrical, physical and mechanical properties. Features: Excellent thermal conductivity Good dimensional stability Chemical resistance High and low temperature resistance Applications: Voice coil frame of loudspeaker Flexible Printed Circuit (FPC) Insulation Pads (heat sink) Ceramic board replacement
High Temperature Double Sided Kapton Polymide Film PI Tape Descriptions: Double Sided Kapton Polymide Film PI Tape,also call Double Sided Polyimide Film Tapes,they are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They can withstand temperatures of up to 500°F/(260°C). Double Sided PI Tape offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance. Features: Thin and conformable enabling masking of uneven surfaces Wide operating temperature range up to 500°F Removes cleanly without adhesive residue after exposure to heat High performance silicone adhesive High strength backing provides superior resistance to puncture and tear Resistance to chemical attack Applications: High Temperature Masking Insulation on Transformers, Motors and Coils Powder Coating Protection of circuit board gold finger contacts during wave solder Solar Panels
High Temperature Golden Kapton Polyimide Film PI Tape Descriptions: High Temperature Golden Kapton Polyimide PI Tape also known as Kapton tape or Polymide Tape, is made of polyimide film with heat resistant silicone adhesive to withstand temperature up to 260ºC (500â??), packaged in a 36 yard (33m) roll. Features: Thin and conformable enabling masking of uneven surfaces Wide operating temperature range up to 500°F Removes cleanly without adhesive residue after exposure to heat High performance silicone adhesive High strength backing provides superior resistance to puncture and tear Resistance to chemical attack Applications: Gold finger mask of printed circuit boards during wave soldering High temperature mask for high temperature powder coating Electrical insulation for traction motor, transformer, cable, and capacitor Bar code labels on PCB Semiconductor manufacturing
High Temperautre Insulation Polyimide PI Film Descriptions: High Temperautre Insulation Polyimide PI Film is a general-purpose film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It has excellent balance of electrical, mechanical, physical, thermal, and chemical properties over a wide range of temperatures from -269â?? to 400â?? (-452â?? to 752â??). It also has good dimensional stability, radiation resistance, and flame resistance. It does not melt or burn as it has the highest UL-94 flammability rating: V-0. Features: High dielectric strength Good dimensional stability Chemical resistance Radiation resistance Flame resistance UL V-0 UL approved qualified film Temp resistance from -269â?? to 400â?? (-452â?? to 752â??) Applications: PI Film can be metallized, punched, formed, laminated, or adhesive coated. It can be used in a variety of electrical and electronic insulation applications: wire and cable tapes,motor slot liners, magnet wire insulation, formed coil insulation, transformer and capacitor insulation Polyimide Adhesive tape or polyimide laminates. . Coverlay or Stiffener in F-PCB Polyimide Label Polyimide tubing.
Double Conductive Tin Plated Copper Foil Tape For EMI Shielding Descriptions: Tin Plated Copper Foil Tape consists of an embossed deadsoft tin-plated copper foil backing and an aggressive pressure-sensitve acrylic adhesive. The edgs of the embossed pattern pressed into the foil cut through the adhesive layer to establish reliable metal-to-metal contact between the backing and the application substrate. Features: Good electrical conductivity from the base material through the surface of viscose to foil substrate. With good shielding effect. Applications: Used for high-end electronic equipment, components of the grounding and EMI shielding, the tin on the plating layer has good weld-ability, and high oxidation and corrosion resistance.
Conductive PET Mylar Copper Foil Tape Insulation Copper Foil Tape For Soldering Descriptions: Mylar copper foil tape is composite material consisting of copper foil laminated onto a polyester film base, and this is suited to fields which demand electrical characteristics. Then copper foil sided coated with conductive or not conductive acrylic adhesive. Features: The PET film can protective the copper foil from damaged and oxidized. The copper foil is conductive. the PET film is Insulation effect. Applications: Computer peripheral wire EMI shielding Used in coaxial cable, local area network wire and electronic communications cable, and other needs of anti interference shielding. Electronic equipment shield FPC Electric wire shield
Descriptions: Double Copper Foil Tape is as a smooth copper (purity is 99.95%) foil that also has an adhesive coating, but this adhesive coating is also conductive. The unplated copper with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Good viscosity, Cold resistance Mechanical resistance, Moisture resistant High heat and electric conductivity Excellent ductility and corrosion resistance Flame retardant Easy to tear apart Applications: Electric and electric springs, switches Lead frames Connectors and oscillation reeds Battery Communication cable Cable armoring Mobile phone main board Ion battery production lamination with PI film PCB collector (electrode backing) materials
Single Sided Conductive Adhesive Copper Foil Acrylic Adhesive Tape Descriptions: Single Copper Foil Tape is as a smooth copper (purity is 99.95%) foil backing with a not conductive acrylic pressure-sensitive adhesive and liner. The unplated copper with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Dead soft copper foil backing for good shielding effectiveness, soldering and converting (slitting and die cutting). Acrylic pressure-sensitive adhesive has good resistance to heat, oxidation, solvents and oils. Removable liner on adhesive side makes it easy to handle, protect the adhesive prior to application and die cut complex shapes. Applications: Commonly used for RFI/EMI (radio-frequency interference or electromagnetic interference) shielding and ESD (electrostatic discharge) grounding for components, integrated circuits, connectors, cables, motors, equipment enclosures/cabinets and shielded rooms. Conductive circuit or bus bar for low voltage applications Used in jobs requiring high conductivity or shielding effectiveness for a given thickness. Best used in non-corrosive environments.
Descriptions: Double aluminum foil tape is as a smooth aluminum (purity is 99.95%) foil that also has an adhesive coating, but this adhesive coating is conductive. The unplated aluminum foil with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Good viscosity, Cold resistance Mechanical resistance, Moisture resistant High heat and electric conductivity Excellent ductility and corrosion resistance Flame retardant Easy to tear apart Applications: Electric and electric springs, switches Lead frames Connectors and oscillation reeds Battery Communication cable Cable armoring Mobile phone main board Ion battery production lamination with PI film PCB collector (electrode backing) materials
PET Laminate Mylar Aluminum Foil Tape For FFC Descriptions: Mylar aluminum foil tape is composite material consisting of aluminum foil laminated on to a polyester film base, and this is suited to fields which demand electrical characteristics. Then aluminum foil side coated with conductive or not conductive acrylic adhesive. Features: The PET film can protective the aluminum foil from damaged and oxidized. The aluminum foil is conductive. the PET film is Insulation effect. Applications: Computer peripheral wire EMI shielding Used in coaxial cable, local area network wire and electronic communications cable and other needs of anti interference shielding. Electronic equipment shield Soft FFC of TV Electric wire shield
Descriptions: Thermal conductive glue is made of an advanced thermal conductive pressure sensitive adhesive.Xinst-P80XXN series provides a better way for applications requiring good adhesion strength and superior thermal conductive efficiency. Xinst-P80XXN series is suitable to apply to electronic mechanical components assembly such as the heat sink module and LED light bar module to provide a better heat-transfer path between heat-generating components and heat sink or other cooling devices. Features: Complete thickness standard is available. Various structures are for different applications. Stable and economic. Superior adhesion strength and thermal conductive efficiency. Applications: Assembly of the heat sink and DDR-RAM module. Assembly of the LED light bar module and metal frame bezel. Die-cut piece and Laminate. Applied to the chip, flexible circuit boards and high-power transistors and heat sinks or other cooling device bonding.
Descriptions: Fiberglass thermal conductive tape is made of glass fabric, double sided coated advanced thermal conductive pressure sensitive adhesive.Xinst-P80XXC series provides a better way for applications requiring good adhesion strength and superior thermal conductive efficiency. Xinst-P series is suitable to apply to electronic mechanical components assembly such as the heat sink module and LED light bar module to provide a better heat-transfer path between heat-generating components and heat sink or other cooling devices Features: Complete thickness standard is available. Various structures are for different applications. Stable and economic. Superior adhesion strength and thermal conductive efficiency. Applications: Assembly of the heat sink and DDR-RAM module. Assembly of the LED light bar module and metal frame bezel. Die-cut piece and Laminate. Applied to the chip, flexible circuit boards and high-power transistors and heat sinks or other cooling device bonding.
Descriptions: Rubber Thermal Conductive Silicone Pad is a kind of thermal interface with high performance. It is soft, self-sticky and elastic. It can fill the gap between heat-generating components and heat sink, metal mechanism and shell or other cooling devices. The heat can be transferred out speedily so as to improve the electronic components' working efficiency and prolong the life-span of equipments. Features: Excellent thermal conductivity and electrical insulation. Soft, self-sticky and elastic. Can be used as buffer absorber. Multiple thicknesses, hardness, and thermal conductivities. Meet the environmental requirements of ROHS and UL. Applications: High Power products like LED lights, LED TV, etc. PDP, LCD, Laptop, PC, Communication hardware equipments, Routers, etc. IC, CPU, COP, Capacitance, MOS, Power Supply Module, Server, Player, Mobile Phone, etc.
Descriptions: Conductive Double Sided Tape is consists of a unique electrical conductive pressure-sensitive acrylic adhesive and a high quality release liner.Xinst411T provides a better way for applications requiring excellent conductivity.Besides,Xinst411 transfer tape is made of a unique PSA to assure the adhesion to many kinds of substrate such as conductive fabric, aluminum foil, copper foil and so forth. Features: Offer wide range of usage and service temperatures. Excellent electrically conductive performance Supplied on a removable liner for easy handling and die-cutting. Thinner for avoiding remaining adhesive residual after slitting. Applications: EMI shielding applications in mobile phone, notebook, PC and others electronic products. EMI shielding applications in connector, FFC and wire stock etc. Die cut pieces and laminate.
RFID EMI Blocking Nickel Copper Conductive Fabric Tape Descriptions: Conductive Fabric Tape is constis of a superior conductive fabric backing coated with a specific electrically conductive pressure-sensitive acrylic adhesive to one side or two side, then coated a excellent release liner. It is typically used for applications requiring good electrical conductivity to achieve the EMI shielding objective. Besided, high performance acrylic adhesive to assure its adhesion to many kinds of substrates such as metal, plastic and so forth. Features: Ideal solution for EMI and RF shielding To protect from electromagnetic radiation interference, and electronic attacks, to secure the normal operation of equipments. To protect information security from electromagnetic leakage To protect human body, high sensitive equipments, etc from electromagnetic radiation injury. Good thermal insulation property, and suitable for tropical and cold areas target. Applications: EMI shielding applications in mobile phone, notebook, PC and other electronic products. EMI shielding applications in connector, FFC and wire stock etc. Extra-work, Die cut pieces and laminate.
Descriptions: Acetate cloth rubber tape is a insulating tape made from acetate fabric coated with a rubber adhesive. Highly compatible with resins and varnish, this tape achieves stable adhesive property. As this tape is made from flexible acetate fabric, it works well on uneven surfaces and is optimal for use in binding harnesses, etc. Features: Easy to use. Working performance is good. Great flexibility to bumpy surface. Applications: For banding of wire harness. For electrical insulation and fixing electronic components.
Descriptions: Copper foil glass cloth tape is copper foil laminated to glass cloth with silicone adhesive can be use for EMI shielding. Features: Shield against EMI/RFI radiation The tape is conductive throughout, including the adhesive, and offers mechanical, electrical, and thermal values to meet shielding requirements Applications: mainly used in all kinds of electronic products, high frequency transformer transmission cover or isolate the interference with the electromagnetic wave or radio waves.
Descriptions: Glass cloth tape is use imported glass cloth coated with high-performance silicone the glass cloth tape is made, with strong paste, tough and resistant to tear and so on, the tape is of particularly high price, the tapecan completely replace the 3M-69 # \ P212 \ TESA4618 \GT-66\imported glass cloth tape in performance. Features: Good stability, can work under 260 â?? for a long time, can withstand 260â?? high temperature short time. Soft, tear resistance, adhesive power is strong, not easy to deformation, suitable for all kinds of special-shaped material surface paste protection. No adhesive residue, high temperature for a long time after curing tear tape, leaving no residue. High mechanical strength, suitable for coil are tightly wrapped; Product application: transformer (especially high frequency modulator, microwave Applications: Motor and transformer coil wrapping. For battery wrapping when assembling. High Temperature protection Sandblasting protection
Descriptions: Double sided glass cloth tape is with imported glass cloth as the basic carrier, and coated with the pressure-sensitive silicone adhesive on both sides, and combined with the fluorine release liner. It has excellent high temperature resistance, easy removal, and good adhesion. Especially because of it's excellent high tempearture resistance, it can also be. It features good temperature resistance, good tensile strength, good chemical resistance, no residue, in line with ROHS and halogen free etc. Features: Good stability, can work under 260 â?? for a long time, can withstand 260â?? high temperature short time. No adhesive residue, high temperature for a long time after curing tear tape, leaving no residue. Applications: Mostly applied in the fixation of the surface board and the other parts during the production process of the electrical parts of digital products. Used for the temporary fixation, masking and protection of the accessories under high temperature process
Die Cutting Custom Size Poron Foam Gasket Tape Foam Strips Product Description PORON is a fine pitch open cell urethane foam produced by Rogers Corporation. The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns. Poron Foam tape Features: Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required. Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices. Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications. Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface. Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies. Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side. Poron Foam tape Applications: Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications. For Sealing, Gasketing, and Cushioning.
