Addition cure silicon rubber for artificial stone products pplications:
It mainly use for making molds for resin, stone, gypsum and cement product with medium size.
Addition cure silicon rubber for artificial stone products Typical Datasheet :
Item No Color Hardness (A°) Viscosity (CS) Tensile-strength( kgf /cm2 ) Tear-strength (kgf /cm2) Elongation-break(%) Mixing Ratio of silicone and catalyst Application(most for resin, stone, gypsum and cement product to make moulds)
HY-E635 Translucent 35±2 8000±2000 =60 =13 =400 1:1
Addition cure silicon rubber for artificial stone products Points of attention:
1,Prone to poisoning, can not mix with condensation, ionic compounds containing N, S-, P, organic matter and of Sn, As, Hg, Ph., easy molding plastic poisoning, resulting in the phenomenon of not curing.
2,Comparing with Condensation cure silicone, Addition cure silicone's adhesive properties to be worse.
3,Addition cure silicone affect by temperature greatly when cured under room temperature.
4,Addition cure silicone is easy to poisoning, please clean the tools which are used for condensation silicone rubber, so that it can avoid poisoning.
It’s fobidden to add the pigment or powder to addition cure silicone rubber arbitrarily,it’s easy to make the catalyst to be poisoning.
5,Addition cure silicone rubebr has two-component, the component A and component B, please pay attention to clean the component A containers before using for the component B, and vice versa
6,In order to avoid the hardness change, we should mix the component A and component B according to its mixing ratio strictly, no atter it’s 1 : 1 or 10 : 1.
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority
Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use.
Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission
Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect.
Applications:
1.Led lighting, lighting equipment
2.Household appliances lcd display
3.Between semiconductor and heat sink
4.Communication product, smart phone, tablet .
5.Desktop, notebook and other portable computer
6.Large power supply etc.
Performance and characteristics:
1.High thermal conductivity, heat transfer coefficient 1.5w/m-k
2.Stable performance, low thermal resistance, effectively improve the heat transfer speed
3.Low hardness, its viscosity high, easy to use
4.By ul and v-o certification standards
Specification:
Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type.
Basic thickness 0.3mm~15mm, special thickness size can be customized
Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement
Product color is mass production color, special color can be adjusted to actual situation .
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority
Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use.
Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission
Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect.
Applications:
1.Led lighting, lighting equipment
2.Household appliances lcd display
3.Between semiconductor and heat sink
4.Communication product, smart phone, tablet .
5.Desktop, notebook and other portable computer
6.Large power supply etc.
Performance and characteristics:
1.High thermal conductivity, heat transfer coefficient 1.5w/m-k
2.Stable performance, low thermal resistance, effectively improve the heat transfer speed
3.Low hardness, its viscosity high, easy to use
4.By ul and v-o certification standards
Specification:
Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type.
Basic thickness 0.3mm~15mm, special thickness size can be customized
Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement
Product color is mass production color, special color can be adjusted to actual situation .
Feature of Silicone rubber thermal conductive insulation pad
High compressibility, soft and flexible
Natural stickiness, no extra surface frontal adhesives
Good thermal conductivity,
Meet With RoHs standard
High thermal conductivity
High conformability to uneven surfaces at low stress application
Electrical isolating Very cost effective
Application of High quality silicone rubber thermal conductive insulation pad
1. Heat sink your CPU/GPU
2. Switching power supply
3. Video equipment
4. Mobile equipment
5. Communication equipment
6.Between semiconductor/magnetic components and heat sinks.
Feature of Silicone rubber thermal conductive insulation pad
High compressibility, soft and flexible
Natural stickiness, no extra surface frontal adhesives
Good thermal conductivity,
Meet With RoHs standard
High thermal conductivity
High conformability to uneven surfaces at low stress application
Electrical isolating Very cost effective
Application of High quality silicone rubber thermal conductive insulation pad
1. Heat sink your CPU/GPU
2. Switching power supply
3. Video equipment
4. Mobile equipment
5. Communication equipment
6.Between semiconductor/magnetic components and heat sinks.
Packing Details : Packing, solid bicycle saddle, 50pcs/carton
Delivery Details : 3-30 days after order of Solid bicycle tire tubes
High temperature core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth
Place of Origin: Guangdong, China (Mainland)
Brand Name: laimeisi
Model Number: fireproof fiberglass cloth
Application: Fiberglass Mesh Cloth
Weight: 200g
Surface Treatment: Silicon Coated
Width: 1000mm
Weave Type: Plain Woven Yarn
Type: C-Glass Alkali
Content: Alkali Free Standing
Temperature: 140~360
Product name: silicone rubber coated colored fireproof fiberglass fabric cloth Color: As Picture Shown
Breakdown Voltage: >4 KV
Hardness: 75
Continuous Use Temp: -40~260
ROHS Test: PASS
Type: fireproof cloth
Keyword: Silicone rubber coated fiberglass fabirc cloth Good
Features: Corrosion Resistance
Certification: Rohs
Packaging & Delivery
Packaging Details: PP bag and standard carton or follow customer request Delivery Detail: Shipped in 7 days after payment
1. Grade: fireproof cloth,fireproof fiberglass cloth,slicone cloth
2. Size: 300mm*50m ,60mm*50m
3. Standard: DIN 315
4. Certification: ISO9001, SGS, CTI, ROHS
Feature of core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth
1.Excellent resistance to heat (dry air), at +260o C continuous and +260o C intermittent.Remains flexible at low temperatures of -40oC.
2.Resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area.
3.Keep constant even at high temperatures.
4.Resistance to chemicals; moderate resistance to general chemical products. 5.fireproof fiberglass cloth
Application of core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth
1.Medical, pharmaceutical and food processing industries.
2.Automotive, electronics and lighting sectors, amongst others.
3.LED, M/B, P/S, Heat Sink,
4.electronic components: IC, CPU, MOS
High temperature core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth
Place of Origin: Guangdong, China (Mainland)
Brand Name: laimeisi
Model Number: fireproof fiberglass cloth
Application: Fiberglass Mesh Cloth
Weight: 200g
Surface Treatment: Silicon Coated
Width: 1000mm
Weave Type: Plain Woven Yarn
Type: C-Glass Alkali
Content: Alkali Free Standing
Temperature: 140~360
Product name: silicone rubber coated colored fireproof fiberglass fabric cloth Color: As Picture Shown
Breakdown Voltage: >4 KV
Hardness: 75
Continuous Use Temp: -40~260
ROHS Test: PASS
Type: fireproof cloth
Keyword: Silicone rubber coated fiberglass fabirc cloth Good
Features: Corrosion Resistance
Certification: Rohs
Packaging & Delivery
Packaging Details: PP bag and standard carton or follow customer request Delivery Detail: Shipped in 7 days after payment
1. Grade: fireproof cloth,fireproof fiberglass cloth,slicone cloth
2. Size: 300mm*50m ,60mm*50m
3. Standard: DIN 315
4. Certification: ISO9001, SGS, CTI, ROHS
Feature of core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth
1.Excellent resistance to heat (dry air), at +260o C continuous and +260o C intermittent.Remains flexible at low temperatures of -40oC.
2.Resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area.
3.Keep constant even at high temperatures.
4.Resistance to chemicals; moderate resistance to general chemical products. 5.fireproof fiberglass cloth
Application of core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth
1.Medical, pharmaceutical and food processing industries.
2.Automotive, electronics and lighting sectors, amongst others.
3.LED, M/B, P/S, Heat Sink,
4.electronic components: IC, CPU, MOS
Product Description
Description of Food Grade Molding Silicone Rubber :
Our RTV-2 Molding materials are general called two-component room temperature vulcanization liquid silicone rubber with excellent fluidity and good operational performance. Add part B into part A, stir the mixture evenly, then pour or brush the liquid mixture to the mother mold, then after 2-6 hours, a flexible silicone rubber mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.
Applications of Food Grade Molding Silicone Rubber :
Liquid food grade molding silicone rubber actually is a platinum catalyst silicone rubber which is totally non toxic, specially used for food molding, such as making silicone molds for confection, chocolate, jelly, sugar, candy, cake, cupcake, biscuit, cracker, icelolly, ice cream, ice sculpture, butter, fondant, bread, bakery, baking etc.
Generally, silicone rubber food tray will be more popular since food such as chocolate and sugar are too small size, so our customers generally make silicone rubber tray, such as chocolate tray, sugar tray etc.
Meanwhile, Food grade molding silicone rubber is also perfect for molding building decorations, arts and crafts, sculptures, furniture, manual mold design, shoe molding, tire molding, rapid prototype molding, foundry casting, lost wax casting, artificial jewelries molding and so on.
rtv2 Electronic silicone / silicon for encapsulating LED display:
HY-9025 is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time.
rtv2 silicone / silicon for encapsulating LED display
Application:
It is applicable to sealing,bonding,coating for electronic parts. It is two-component addition cure silicone rubber which can be divided into a transparent type and a flame resistant type. The product, which can be vulcanized under room temperature or moderate temperature with low viscosity, easy mixing and pouring, is applicable to bulk pouring with excellent electrical performance.
Applying for the surface of PC (Poly-carbonate), PP, ABS, PVC, Metal, etc.
High powered electronic encapsulation and DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
Insulation, waterproof and bonding of general electronic components.
Filling for LED, LCD electronic display, circuit board, PCB substrate, etc.
Outdoor protection for LED screen.
Features of electrical conductive silicone Electronic potting Silicone Encapsulants:
1. Good self-leveling.
2. Neutral, no corrosive.
3. Excellent adhesion properties for most materials.
4. Excellent electrical properties and waterproof.
Description
HY-902 with the advantages of high temperature resistance, abrasion resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. The product is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The silicon pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.
Application
HY-902 is a kind of silicone rubber to make the printing pads for plastic toys, craft works, product printing.
Characteristics
good printing effects
good quality
good resilience
and without any impurity.
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
Applications of liquid pad printing silicone rubber
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Operation Instructions of liquid pad printing silicone rubber
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.
Application of Medical Grade liquid silicone rubber for shoe insoles
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.
Foot Relief Insoles are fluid filled insoles that have five primary benefits and a long list of secondary benefits. The insoles are designed to cushion, massage, absorb shock, give arch support, and increase circulation. The liquid insole will form to almost any shape foot giving you a customized fit after only a few minutes of wear.
Screen printing silicone elastosil is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of almospheric moisture.
Application
screen printing silicone elastosil can be used for printing of sealing patterns for on deverse substrates like steel or sulphur containing or sulphur free cylinder head gaskets cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc
Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. Tin cured silicones can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance is required. Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperature metals. Our tin-cured silicone systems are the most economical. They are best used for casting resins and low melt metals.
Medical Grade liquid silicone rubber for shoe insoles
Application of Medical Grade liquid silicone rubber for shoe insoles
The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.
This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care.
Technique Data of HY-Q625# Medical Grade liquid silicone rubber for shoe insoles
Model HY-Q625
Appearance Transparent
Mixing Ratio 1:1
Operating time (Mins 25°C) 30-40
Curing time (Mins 25°C) 2-4h
Hardness (A°) 25±2
Density ( g/cm 3 ) 1.08
Viscosity (CS) 6000 ± 2000
Tensile-strength( kgf/cm2 ) 3.3
Tear-strength (kgf /cm ) 8±2
Elongation-break(%) 420
Retractility(%) â?¤0.1
Features of Medical Grade liquid silicone rubber for shoe insoles
1.convenient 1:1 mixed ratio by weight
2. high elongation gel
3. low viscosity easily pourable
4.room temperature vulcanized and heat acceleration
5. soft track and selcky gel
6. absorbs shock and protets delicate mechanical component
7. no creativ by â??product, no concerns nogarding corrosion
Q: What are Foot Relief Insoles designed to do?
A: Foot Relief Insoles are fluid filled insoles that have five primary benefits and a long list of secondary benefits. The insoles are designed to cushion, massage, absorb shock, give arch support, and increase circulation. The liquid insole will form to almost any shape foot giving you a customized fit after only a few minutes of wear. Many customers refer to our liquid filled insoles as "liquid orthotics" because of the way the insoles stretch slightly allowing the liquid to fill in the unique arches of your foot providing maximum comfort.
1. Product Feature of Addition cure Electronic Potting Silicone Rubber
Electronic Potting Silicone Rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)ã?�PPã?�ABSã?�PVC, etc. and metal materials.
2. Typical Application of Addition cure Electronic Potting Silicone Rubber
HY-9055 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
3. Technical Guidelines of of Addition cure Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
4.Notes of Addition cure Electronic Potting Silicone Rubber
a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
b. HY-9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
c. HY-9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
PACKAGE
40Kg/pail as a set (Part A 20Kg + Part B 20Kg)
SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months when stored at 24C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
