Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use. Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect. Applications: 1.Led lighting, lighting equipment 2.Household appliances lcd display 3.Between semiconductor and heat sink 4.Communication product, smart phone, tablet . 5.Desktop, notebook and other portable computer 6.Large power supply etc. Performance and characteristics: 1.High thermal conductivity, heat transfer coefficient 1.5w/m-k 2.Stable performance, low thermal resistance, effectively improve the heat transfer speed 3.Low hardness, its viscosity high, easy to use 4.By ul and v-o certification standards Specification: Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type. Basic thickness 0.3mm~15mm, special thickness size can be customized Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement Product color is mass production color, special color can be adjusted to actual situation .
Gm400 thermal siliocne grease has excellent thermal conductivity, good stability, and has a good wettability on the copper, aluminum surface. Due to the viscosity lower energysufficient wetting contact surface to form very low the interface thermal resistance, which can rapidly will transfer to the radiating heat device, high efficiency of heat transfer. Applications: 1.Between semiconductor and heat sink 2.Between cpu and radiator 3.Between the resistor and the base 4.Thermoelectric cooling device 5.Temperature regulator and a mounting surface Specifications: 1kg/ 2kg/ 4kg/ jar 30g/piece Storage conditions: Stored in a cool and dry place, seal placed Performance and advantage: 1.Thermal conductivity : 1.2w/m-k 2.Thermal impedance :0.06?-in/w 3.Extremely low thermal resistance , better transmission heat 4.Complete wetting contact surface, improving the heat dissipation effect 5.Safety and environmental protection, through the rohs certification Features: 1. Excellent thermal conductivity; 2. Good electric insulation, operational stability; 3. Resistant to high temperature and aging, it can be used in the temperature of -50-250 degree for a long time; 4. Low freeness; 5. Nontoxic, odorless, non-drying, do not harden and do not dissolve; 6. Completely in conformity with rohs.
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use. Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect. Applications: 1.Led lighting, lighting equipment 2.Household appliances lcd display 3.Between semiconductor and heat sink 4.Communication product, smart phone, tablet . 5.Desktop, notebook and other portable computer 6.Large power supply etc. Performance and characteristics: 1.High thermal conductivity, heat transfer coefficient 1.5w/m-k 2.Stable performance, low thermal resistance, effectively improve the heat transfer speed 3.Low hardness, its viscosity high, easy to use 4.By ul and v-o certification standards Specification: Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type. Basic thickness 0.3mm~15mm, special thickness size can be customized Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement Product color is mass production color, special color can be adjusted to actual situation .
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Supplier: Crude oil, cement, charcoal, flour, palm kernel oil, palm kernel seed, river sand, white beans, bitumen, turkey, parboiled rice, used car, motor oil, diesel
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps. Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
Supplier: Remelted zinc ingots, pwg zinc ingots, zinc dross, zinc ash, zinc oxide, lead dross, magnesium ingots, all grades, silicon metal, lead ore/ concentrate, zinc concentrate/sulphide
Buyer: Zinc dross, zinc ash or skimming from hot dip galvanizing process, zinc fines, zinc die cast scraps, lead dross, brass and copper scraps
