Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.
Description of platinum curing mould making liquid silicone rubber Addition cure silicone is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1. It can cure at room temperature as well as under heat. It's a kind of food grade silicone and mainly used for mold making. Application of platinum curing mould making liquid silicone rubber Silicone rubber is mainly used for making molds of tire, concrete stone, grc, polyurethane products; wax, candle decoration; rapid prototyping and tyre molds; chocolate, candy and similar products.
Platinum cure molding rubber silicone rtv Strenghts for platinum cure molding rubber silicone rtv Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould. Why platinum cure molding rubber silicone rtv Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance. It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed Features of platinum cure molding rubber silicone rtv 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic Datasheet of platinum cure molding rubber silicone rtv ModelColorMixing ratioPot life (mins)Demouled time (hrs)Hardness(a0)Tensile-strength (kgf/cm2)Tear-strength (kgf/cm)Viscosity (cps)Elongation (%) Hy-e625Translucent1 : 130-604±125±235±225±26000±3000=400 Hy-e630Translucent1 : 130-604±130±240±223±27000±3000=395 Hy-e635Translucent1 : 130-60 4±135±247±2 22±28000±3000 =470
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps. Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
Supplier: Remelted zinc ingots, pwg zinc ingots, zinc dross, zinc ash, zinc oxide, lead dross, magnesium ingots, all grades, silicon metal, lead ore/ concentrate, zinc concentrate/sulphide
Buyer: Zinc dross, zinc ash or skimming from hot dip galvanizing process, zinc fines, zinc die cast scraps, lead dross, brass and copper scraps
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould. Features of platinum cure molding rubber silicone rtv 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic Why platinum cure molding rubber silicone rtv Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance. It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould. Features of platinum cure molding rubber silicone rtv 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic Datasheet of platinum cure molding rubber silicone rtv ModelColorMixing ratioPot life (mins)Demouled time (hrs)Hardness(A0)Tensile-strength (kgf/cm2)Tear-strength (kgf/cm)Viscosity (cps)Elongation (%) HY-E625translucent1 : 130-604±125±235±225±26000±3000?¥400 HY-E630translucent1 : 130-604±130±240±223±27000±3000?¥395 HY-E635translucent1 : 130-60 4±135±247±2 22±28000±3000470
