Production line for rubber products such as molded and extruded products.
Nitrile Rubber Crusher.
1'two rollers are made from chilled cast iron, smooth surface is highly polished and scratch proof by cutting knife:high hardness and wear-resistant; 2'the roller is hollow structure, which is for adjusting the temperature of the rollers by Steam or cooling water in term of different request; 3'nip adjustment mode:manual or electric; 4'main bearings:bearing or copper bush or nylon bush; 5'the machine is equipped with an overlaod protection device to prevent the major components from being damaged due to overloading. 6'the machine is also equipped with an emergency device. When an emergent accident happens, just draw the safety pull-rod, and the machine will stop immediately. It is safe and reliable. 7'the machine is equipped with scraper and wind-up unit, which can take the reclaimed rubber away from the wind-up roller
1'with ce and iso9001-2000 certificates 2'finest workmanship, high quality at reasonable price 3'good reputation widely Main uses: This rubber cutting machine is mainly used to cut the natural rubber, synthetic rubber, and other plastic materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
with even fabric cord tension. It avoids sometimes tightening and loosening and improves the cutting accuracy. 3. The clamping cutting device uses festo rodless cylinder to drive the cuter rack to move forward and backward. It improves the working efficiency and omits the cutting speed improving device and chain drive system in xal-1450a. It is characterized by simple structure, quick running speed and smooth working without nosie. 4. The main drive cloth feeding device adopts the servo motor to drive the feed cloth roller directly. The feed cloth length, cutting times fixing programmes are controlled by plc. The feed cloth repeated accuracy is within ¡à1.0mm. 5. Pneumatic parts use smc products to improve the reliable work stability.
Xh-401ae two roll mill The main function of this machine is to ensure your products¡¡¥ quality and colors meet exactly the demand of your clients¡¡¥; afterwards the experimental results and the right proportion can be applied to production lines. This machine is capable of mixing raw materials and accessory ingredients evenly for testing. Technical parameters rade Temperature controller: rkc from japan Heating mode: electric heating Temperature precision: +-2 degree centigrade Motor: one taiwan chengbang speed reducing motors Transmission mode: chain wheel and chain transmission Weight: about 500kg Note: the main configuration is as follow: Rkc temperature controller (japan); temperature sensor (japan); omron relay (japan); shilin contactor (taiwan); yangming ssr (taiwan); ckc timer (taiwan); taiwan taizhan heating tube (taiwan); taida frequency converter, etc. Wooden case, international standard
Type : vulcanizer Place of origin : shandong, china (mainland) Brand name : go world Model number : xlb Power(w) : 18.5 Model number : xlb-d1400x8000. Minimum order quantity: 1 set/sets Packaging details: packed in wooden case or canvas Delivery time: according to order size, general is a availability on Payment terms: L/C, T/T Supply ability: 6 set/sets per month
(1)safety A. The waste gas produced during the process is alkyl from c1 to c4, which is dangerous when burning directly. In our process, it is firstly transferred through waste Gas recycle system and a safe device spray gun. Before burning, we should ensure the safety of production. B. Pressure gauge, alarming device and safety valve. (2)environmental protective A. Effective water dedusting system can avoid black smoke. B. The exhaust gas will be recycled for heating reactor to save energy and no pollution C. Every junction of the reactor is in good sealing situation with professional sealing material. D. Waste solid. The solid residua will be left in the reactor. Its main component is black carbon.It can be the raw material industrial black carbon. Also could be mixed with the pulverized coal ash as raw material in thermal power plant, also could be the raw material of pulverized coal ash brick (one kind of environmental protective building material). Container
This vertical rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber. This vertical rubber cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder. Wooden case for usual size
Mould size: length 215mm with 3 cavity; Heating capcity:1000w each mouldating can finish within 20min. Length:1020mm Height:1900mm Width: 960mm.
Primary parameter of which as following:tansferring volume:150cc/180cc;transferring strength :27tons; Transferring manner: from bottom to top; heating platen size:300300 and 300400; heating platen material :45steel.This type of machine is very good , primary advantage of which as following: heating temp.Is very uniform; transferring speed and volume can be easily controlled and cycle running is soomth;structure of machine is very compact , simple and pretty and by which people can operate easily and safely. Length:1550mm, height:2620mm, width:620mm.
Waste tyre oil refining plant 1. High oil yield 2. Unique exhaust removal system 3. En-friendly.
Number Items Introduction 1 Model JZB-5 JZB-8 JZB-10 2 Raw material Waste plastic and rubber Waste plastic and rubber Waste plastic and rubber 3 Structural form Horizontal Horizontal Horizontal 4 Capacity/day About 5 tons About 8 tons About 10 tons 5 Pressure Atmospheric Atmospheric Atmospheric 6 Rotate speed of the reactor 0.4R/min 0.4R/min 0.4R/min 7 Cooling form Water Water Water 8 Heating form Direct Direct Direct 9 Installation mode Base Base Base 10 Noise db(A) 85 85 85 11 Working mode Intermittent Intermittent Intermittent 12 Size of reactor 2200¡Á6000 2200¡Á6600 2600¡Á6600 13 Volumeof reactor 16 m3 19 m3 23m3 14 Weight of reator About 5 tons About 5.5 tons About 6 tons 15 Production cycle 12 days 12 days 12 days 16 Installation cycle 12 days 12 days 12 days.
ITEM CONTENT 1 MODEL PYROLYSIS PLANT LY-15 (CONTINUOUS) LY-18 (CONTINUOUS) LY-20 (CONTINUOUS) LY-22 (CONTINUOUS) 2 RAW MATERIAL waste plastic, waste rubber waste plastic, waste rubber waste plastic, waste rubber waste plastic, waste rubber 3 STRUCTURE Horizontal rotation Horizontal rotation Horizontal rotation Horizontal rotation 4 16-HOUR HANDING CAPACITY/PER BATCVH 3-4 tons of raw material 5-6 tons of raw material 6-8tons of raw material 8-10 tons of raw material 5 16-HOUR OIL PRODUCTION 1.2-1.6 tons of fuel oil 2-2.4 tons of fuel oil 2.4-3.2 tons of fuel oil 3.2-4 tons of fuel oil 6 WORKING PRESSURE Room pressure Room pressure Room pressure Room pressure 7 HOST SPEED 0.4r/m 0.4r/m 0.4r/m 0.4r/m 8 POWER 3.0KW 4.0KW 4.0KW 5.5KW 9 COOLING Water cooling Water cooling Water cooling Water cooling 10 COOLING WATER CONSUMPTION 3 4 6 8 11 TRANSMISSION Internal gears Internal gears Internal gears Gears 12 HEATING MODE Directly heating Directly heating Directly heating Directly heating 13 INSTALLATION(T/H) Have basis Have basis Have basis Have basis 14 NOISE DB(A) ¡Ü85 ¡Ü85 ¡Ü85 ¡Ü85 15 HOST DIMENSIONS 1500x6000 1800x6000 2000x6000 2200x6600 16 WORKING FORM Continuous operation Continuous operation Continuous operation Continuous operation 17 HOST WEIGHT (T) 15 17 19 22 18 EQUIPMENT MANUFACTURING CYCLE 20 days 20 days 20 days 20 days.
This set of rubber-plastic foaming production line adopts the most advanced technology equipment on manufacturing and processing rubber -plastic products. It is suitable for making the shoe materials, EVA foaming sheet packaging material, EVA foaming type slippers, EVA bedding for children, yoga, and other rubber-plastic foaming products. According to the output every day, can determine the number of equipment and the specifications . Wooden case.
Flame retardant rubber conveyor belt production process and equipment is similar to general fabric and steel wire belt conveyor production processes and equipment. This provision production line can produce common fabric rubber conveyor belt and flame retardant conveyor and also produce steel wire conveyor belt. Wooden case.
Rubber tiles is a kind of recycled rubber as a raw material, a new type of surface decoration materials though a high temperature and appropriate pressure. Rubber tiles are colored by the post-treated rubber particles coated with adhesive mixture, and then pressed. Mainly used for outdoor, can also be used indoors. Rubber tiles made of two different densities of material composition, colorful surface with fine powder or small plastic colored wire and through a special process, while the lower coarse powder or pellets, made of plastic wire. Wooden case.
A method from waste tire makes reclaimed rubber, though tire cutting equipments decompose and break the tire into small blocks, then smashed by crushing mill into granular, and filtered by the screener, with the help of the difference of air and wind of the separator, separates the fine fiber and rubber then get semi-finished products, then make the semi-finished reclaimed rubber though contaminated, desulfurization, cleaning and refining, we can get high purity reclaimed rubber. This method is not polluting the environment, promotes recycling, reduces human laboratory. Wooden case.
This production line equipment, includes vertical rubber cutting machine, rubber kneader, rubber mixing machine, rubber vulcanizing press machine etc., can produce a variety of rubber products. Such as rubber mats, rubber seals, rubber oil seals, pipe seals. and so on. Wooden case.
-The rubber crusher belongs to reclaimed rubber machinery, it is mainly consists of machine body, transmission part, security device, roller temperature adjustment device, lubricating system and accident driving-stop device. -The former and the later roller is the main working parts of the machine, they working in an opposite direction via the motor and reduction gear's transmission within a certain speed ratio. -The roller's surface is made by chilled iron, hard, abrasion proof and long life time, the two sides of the roller is supported by sliding bearing, and use oil syringe for lubricant. The distance between two rollers can adjusted freely in a certain range. The machine is installed with security device, when working overloaded, the safe chip will break up to protect the main parts from damaged because of overloading. When the machine breaks down, once pulling the draw bar of the accident driving-stop device, the machine would stop rotating immediately. Both sides of the roller installed with rubber back plate. Parts of rollers are equipped with cooling device, using to adjust roll surface temperature.