Xh-401ae two roll mill
The main function of this machine is to ensure your products¡¡¥ quality and colors meet exactly the demand of your clients¡¡¥; afterwards the experimental results and the right proportion can be applied to production lines. This machine is capable of mixing raw materials and accessory ingredients evenly for testing.
Technical parameters
rade
Temperature controller: rkc from japan
Heating mode: electric heating
Temperature precision: +-2 degree centigrade
Motor: one taiwan chengbang speed reducing motors
Transmission mode: chain wheel and chain transmission
Weight: about 500kg
Note: the main configuration is as follow:
Rkc temperature controller (japan); temperature sensor (japan); omron relay (japan); shilin contactor (taiwan); yangming ssr (taiwan); ckc timer (taiwan); taiwan taizhan heating tube (taiwan); taida frequency converter, etc.
Wooden case, international standard
Type xk-150 Xk-250 Xk-300 Xk-360 X(s)k-400 X(s)k-450 X(s)k-560 Working diameter of rolls (mm) +150 +250 +300 +360 +400 +450 +560 Working length of rolls (mm) 320 620 750 900 1000 1200 1530 Working linear speed of front roll(m/min) 8 15.1 15.1 16.25 18.65 24.5 27.7 Max gap (mm) 10 10 10 10 15 15 15 Capacity per.Batch(kg) 1-2 10-15 15-20 20-25 18-35 25-50 50-65 Driving motor power(kw) 7.5 18.5 22 30 37 55 95 Overall dimension (mm) L 1080 3400 3580 3940 4250 5200 6120 W 796 1350 1550 1780 1850 2380 2280 H 1415 1500 1695 1740 1870 1770 2000 Weight (kg) 1100 3500 5205 5670 7600 13000 22000 Notes Bearing Nylon bush grease lub copper sleeve oil lub Nylon bush grease lub The machine is mainly used in rubber & plastic pruducts factory: natural rubber plasticating, raw rubber and compound mixing, as well as rubber warm-up and rubber sheeting. As a open type two roller mixing mill, it consists of seat, frame, roller, driving gear, lubricating device, cooling and heating device, adjusting device of roller nip, safety brake, motor and reducer, etc. The roller, with smooth surface after polished, is made of chilled cast iron. Steam and cooling water can be inputted in the empty roller to adjust temperature of roller. Two rollers rotate reversely with different speed, so that rubber materials are drawn into the gap of the two rollers for processing.
Continuous operating mixing machine Sandychen: Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. it takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
We make open mixing mill models from XK-160 to XK-610 Usage: For rubber & plastic compound mixing and sheeting Model: X(S)K-160X320 X(S)K-230X635 X(S)K-250X635 X(S)K-300X700 X(S)K-360X900 X(S)K-360X900 X(S)K-400X1000 X(S)K-450X1200 X(S)K-550X1500 X(S)K-610X1730 What are the options and configurations? 1. Driving system: Bull gear drive, single shaft output or double shaft output for your choice. 2. Roller gap adjustment: by manual or electrical (motor drive) for your choice. 3. Roller support: by nylon bush or bearing rolls for your choice. 4. Lubrication system: by grease or oil pump for your choice. 5. Stock guider: movable, fixed or hydraulic for your choice. 6. Gear reducer: ZSY harden tooth reducer. 7. Electrical components brand: CHINT, Schneider or Siemens, etc. for your choice. 8. Stock blender optional.
XK150 XK250 XK300 XK360 XK400 XK450 XK560 Wooden or others
Supplier: Two roll mill, extruder, kneader, and other rubber machine, testing machine
SVR3L is made from latex harvested from our rubber plantation. It can meet customer strict requirement about some of technicalities such as: the PO, Color (Lovibond), SVR3L is made from latex harvested from our rubber plantation. It can meet customer strict requirement about some of technicalities such as: the PO, Color (Lovibond), Latex is preserved by ammonia or sodium sulfite. Then coagulated with formic acid, followed by shredding by passing through a rolling mill, washing system and hash.
SVR3L is made from latex harvested from our rubber plantation. It can meet customer's strict requirement about some of technicalities such as: the PO, Color (Lovibond), SVR3L is made from latex harvested from our rubber plantation. It can meet customerâ??s strict requirement about some of technicalities such as: the PO, Color (Lovibond), â?¦ Latex is preserved by ammonia or sodium sulfite. Then coagulated with formic acid, followed by shredding by passing through a rolling mill, washing system and hash. After the crumb rubber is dried, it will be compressed into blocks and packed in polyethylene bags
New product lab banbury mixer Dispersion kneader is used for rubber&plastic raw material mixing and dispersion, just like the pvc eva nbr sbr etc.The specific proposal would be based on the materials characteristic, production capacity. Specifications for dispersion kneader Type Unit Ln-1 to ln-10 Capacity Liter 1-10 Driving motor Kw 2.2-15 Flip device Hydraulic flipping Flip angle ° 110 Air compressor Kw 2.2 Water cooling Mpa 0.2-0.4 Electric heating W 650-1800 Size Mm About 1900*1000*2000 Weight Kg 800-2300 Main features 1) fit for various of high filled composites. 2) effective leak proof device. 3) m-w type pressurization for even dispersion. 4) accurate control system(temperature system ;electric system). 5) low maintenance by imported accessories.
-The rubber crusher belongs to reclaimed rubber machinery, it is mainly consists of machine body, transmission part, security device, roller temperature adjustment device, lubricating system and accident driving-stop device. -The former and the later roller is the main working parts of the machine, they working in an opposite direction via the motor and reduction gear's transmission within a certain speed ratio. -The roller's surface is made by chilled iron, hard, abrasion proof and long life time, the two sides of the roller is supported by sliding bearing, and use oil syringe for lubricant. The distance between two rollers can adjusted freely in a certain range. The machine is installed with security device, when working overloaded, the safe chip will break up to protect the main parts from damaged because of overloading. When the machine breaks down, once pulling the draw bar of the accident driving-stop device, the machine would stop rotating immediately. Both sides of the roller installed with rubber back plate. Parts of rollers are equipped with cooling device, using to adjust roll surface temperature.
