Custom rubber parts made to meet your specific requirements
Sanshi Rubber's custom rubber parts and products include round rubber gasket, molded mechanical rubber parts products, molded mechanical rubber bushings for industry Molded silicone rubber parts, round shape rubber gasket, etc. We use custom compounds and commercial grade rubbers as well as compression, injection and transfer molding equipment. Contact us to learn more.
Sanshi Rubber can provide custom rubber parts and products to meet the specific needs of your project. As an experienced manufacturer of custom rubber parts, we aim to provide you with the best parts to meet your needs.
Installation position: transmission side
Bearing type: rubber metal support
Installation location: rear
Length [mm]: 102
Weight [kg]: 0390
Number of necessary pieces: 1
Inner diameter [mm]: 10,3
Bearing type: rubber metal support
1.The pressure-bearing components are forged, so it has better strength and impact toughness;
2.Floating sealing is applied to the cylinder cover and the open/close of the cover is realized by hydraulic power, so it is quick and convenient for changing rams;
3.The auxiliary oil cylinder affords a smaller volume with same function; double ram Cameron U BOP
4.The ram rubber has massive storage volume, and it adopts self-contained sealing;
5.The standard configuration includes a manual locking device, which ensures the ram is closed tightly in case there is a hydraulic pressure loss;
6.Both the manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers' requirements, and the installation positions can be changed easily.
Dredging projects can be divided into several types, including capital construction dredging project for port and shipping lane construction, maintenance dredging to the operated port and shipping lane to guarantee enough navigation dimensions, environmental dredging for the silt cleaning of river, lake and sea, dredger filling projects to strength the coast protection or land reclamation. So silt dredge hose is need in these projects, which is mainly used for the suction and discharge of silt.
Silt dredge hoses, also called slurry dredge hose, are usually installed on the two sides of the dredge pump to suck and discharge silt. They are easy to install and remove due to the unique construction of flanges on the each end of hose. Silt dredge hose is very flexible and stable, and it can reduce the vibration caused by storm and water movement. It is highly resistant to abrasion and aging.
Silt dredge hose consists of tube, reinforcement and cover. The tube is made from the mixture of natural rubber and synthetic rubber, mainly EPDM, making the silt dredge hose resistant to abrasion, corrosion and aging. Reinforcement of silt dredge hose is made from multiple synthetic fabrics with spring helix steel w ire, making the hose have very high tensile strength and have the ability of absorbing shock and vibration. The cover is made from SBR, which makes silt dredge hose resistant to cut, abrasion, corrosion, weather, ozone, sunlight and aging.
Many silt dredge hoses are on the ground
Silt dredge hose.
A silt dredge hose with black flanges.
Silt dredge hose with black flanges.
Details of silt dredge hose:
Structure: silt dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the silt dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20 ¡ãC to +40 ¡ãC.
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 MPa - 1.2 MPa.
Burst pressure: 1 MPa - 2.4 MPa.
The specification of silt dredge hose
Hose code ID OD Working pressure Burst pressure Length
inch mm inch mm MPa bar MPa bar m
SFH-01 6 152 7-1/4 182 1.2 12 2.4 24 20
SFH-02 8 203 9-1/5 233 1.2 12 2.4 24 20
SFH-03 10 254 11-1/5 284 1 10 2 20 10
SFH-04 12 304 13-2/5 340 1 10 2 20 6 - 10
SFH-05 14 350 15-2/5 390 1 10 2 20 6 - 10
SFH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10
SFH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10
SFH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10
SFH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10
SFH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10
SFH-11 40 1000 41-1/2 1050 0.5 5 1 10 6
SFH-12 48 1200 49-1/5 1250 0.5 5 1 10 6
SFH-13 52 1300 53-1/5 1350 0.5 5 1 10 6
Dredge hose can be used to handle many types of media such as slurry, silt and sand for its excellent abrasion resistance. And it is also used to handle seawater. This is seawater dredge hose. It is mainly used for the suction and discharge of seawater.
Our seawater dredge hose is composed of three parts: tube, reinforcement and cover. The tube is made from the blend of EPDM and natural rubber, which makes the seawater dredge hose highly resistant to abrasion, corrosion, aging and weather. So it can transport the corrosive medium - seawater. The reinforcement is made from spring helix steel wire with multiple synthetic textile, making the seawater dredge hose resistant to kink. And the reinforcement provides full vibration dampening. The cover is made from super high quality neoprene, which makes the seawater dredge hose resistant to corrosive salt water, cut, abrasion, weather, ozone and aging.
Our seawater dredge hose is designed specially to handle seawater, so our engineers choose appropriate materials for the hose. Therefore, it can be competent the job well. Besides, the diameter, length and tube thickness of our seawater dredge hose can be customized according to your requirements.
A seawater dredge hose with red flanges.
Seawater dredge hose.
Many seawater dredge hoses are on the ground.
Seawater dredge hose cross section.
Details of seawater dredge hose:
Structure: seawater dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the seawater dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20 ¡ãC to +40 ¡ãC.
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 MPa - 1.2 MPa.
Burst pressure: 1 MPa - 2.4 MPa.
The specification of seawater dredge hose
Hose code ID OD Working pressure Burst pressure Length
inch mm inch mm MPa bar MPa bar m
SWDH-01 6 152 7-1/4 182 1.2 12 2.4 24 20
SWDH-02 8 203 9-1/5 233 1.2 12 2.4 24 20
SWDH-03 10 254 11-1/5 284 1 10 2 20 10
SWDH-04 12 304 13-2/5 340 1 10 2 20 6 - 10
SWDH-05 14 350 15-2/5 390 1 10 2 20 6 - 10
SWDH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10
SWDH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10
SWDH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10
SWDH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10
SWDH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10
SWDH-11 40 1000 41-1/2 1050 0.5 5 1 10 6
SWDH-12 48 1200 49-1/5 1250 0.5 5 1 10 6
SWDH-13 52 1300 53-1/5 1350 0.5 5 1 10 6
3189 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
Details of dredge hose:
Structure: dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 Mpa - 1.2 Mpa.
Burst pressure: 1 Mpa - 2.4 Mpa.
1>.Ceramic rubber liner description:
Ceramic rubber liner is compounded by rubber sheet, flat or spherical ceramic tiles and
Steel plate through hot vulcanizing process.It is fixed to equipment surface by means of bolts
Connection. There are two types of ceramic surface:flat and spherical.Ceramic rubber liner is
High wearable, high cut-resistant, and super impact-resistant.
2>.Features of ceramic rubber liner:
High wear and cut resistance
High impact resistance
3>.Technical parameters of ceramic rubber liner:
3.1.Aluminum oxide content of ceramic:92±1%;specific gravity of ceramic :3.6±0.1;hardness of ceramic:>mohs hardness 9;color: white.
3.2.Rubber:nr; peeling strength:=25 mpa
3.3.Steel plate:q235a
3.4.Selection principles:
Shore scleroscope hardness A: 655
Application:
Entrances
reception area
doorways
corridors
Hallways
Features:
anti-slip design which reduces the chance of people falling over
impact absorbing and hardwearing which ensures cushioning under foot
available in long lengths which avoids joins and trip points
easy to clean patterns
open design pattern which provides a good grip and is easy to clean
available in long lengths for minimal joins
soft, yet hard wearing which provides both comfort and durability
non porous surface which is easy to clean and avoids a build up of bacteria
We produce rubber sheet flooring include stud round dot rubber roll, fine ribbed, checker plate, willow, board ribber rubber sheet with anti slip feature.
HNBR rubber bladder is composed of rubber pulsation bladder,rubber balance plate and pressure plate bolt, it can reduce the drilling pump pressure fluctuations of instantaneous displacement change;
Make the pump pressure smoothly, protect equipment from damage caused by severe vibration.
the product is also used as stabilizer and vibration absorber for air pump.
Filled with nitrogen in the air or inert gas, in the absence of them,air can replace.But oxygen or combustible gas is forbidden.
Inflation pressure is 20% ~ 30% of the maximum working pressure. The advanced filling pressure is 2.0-2.5 MPa.
All products will be made according to API and related international standard as per customers' requirements.
Casing quick-operating thread protector is one kind of manual device for protecting casing outside thread. The structure is simple, solid durable, reliable performance. Adopting for our casing quick-operating thread protectors could save time and cost.
Material:nature rubber+EPDM
Color:any color is available
Thickness:8-15mm
Width:1.22m
Length:15-30m
Warranty:5 years
Installation:by adhesive,easy to install
Features:Waterproof,UV resistance,aging resistance,eco-friendly,non-toxic,non-pollution...etc.
Certificate:IAAF,SGS,CE,ASTM,ISO9001,ISO14001,ISO45001
Application:stadium,sports center,sports court,gym,school playground...ect.
Floating pneumatic rubber fenders have been in use for around 50 years. It is the leading device for marine application in the world. This compressed air filled rubber fender is used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB).
Florescence Pneumatic Rubber Fender Construction:
Outer rubber: rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.
Inner rubber: liner of a rubber membrane that seals the pressurized air inside the fender.
Synthetic-tyre-cord layer for reinforcement: layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender.
Bead ring: steel ring which is placed at one end (or both ends) of the fender and holds the end of cord layers
Flange opening: steel flange, which is mounted on the fender, to which an air valve or safety valve can be adapted.
Florescence Pneumatic Rubber Fender Advantages:
1. High energy absorption and with a low reaction force
2. Light weight, portable and floatable, can be installed and replaced easily
3. Heavy duty and long service life-over 10 years
4. Supplied as sling type (body only) or with chain and tire net for protection of the fender body
5. Sizes from 0.5m diameter Ã? 1.0m length up to 4.5m diameter Ã? 12m length
6. Suitable for locations with large and small tidal differences
Classification of floating pneumatic fender:
Fender types:
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Floating pneumatic rubber fenders have been in use for around 50 years. It is the leading device for marine application in the world. This compressed air filled rubber fender is used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB).
Florescence Pneumatic Rubber Fender Construction:
Outer rubber: rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.
Inner rubber: liner of a rubber membrane that seals the pressurized air inside the fender.
Synthetic-tyre-cord layer for reinforcement: layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender.
Bead ring: steel ring which is placed at one end (or both ends) of the fender and holds the end of cord layers
Flange opening: steel flange, which is mounted on the fender, to which an air valve or safety valve can be adapted.
Florescence Pneumatic Rubber Fender Advantages:
1. High energy absorption and with a low reaction force
2. Light weight, portable and floatable, can be installed and replaced easily
3. Heavy duty and long service life-over 10 years
4. Supplied as sling type (body only) or with chain and tire net for protection of the fender body
5. Sizes from 0.5m diameter Ã? 1.0m length up to 4.5m diameter Ã? 12m length
6. Suitable for locations with large and small tidal differences
Classification of floating pneumatic fender:
Fender types:
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Non-toxic, odorless, two-component liquid silicone rubber, are two-component materials.Resistance high temperature of 250, shrinkage rate lower than 0.1%.
Applications of liquid pad printing silicone rubber
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Features of liquid pad printing silicone rubber
a. resistance to deformation, high-temperature
b. high printing times
c. good aging resistance
d. exceptional elasticity
e. great printing effect
Since 2018 year, we are completely carried out the whole production line from mold, Refining ,trimming, Assembly with the most professional rubber vulcanizing equipment, the innovative R&D sprite, strong production capacity, strict quality control that make us well to produce the material of NR,NBR, EPDM,SIR,LSR,CR,,SBR,FKM,PU,PP,PVC,PE,PC,ABS etc, Now the capacity more than 20000000pcs/day to ensure the lead time on time!
We are cooperate well with domestic and abroad, such as USA Germany, France, UK, Italy, with famous brand, such as Kohler, Dollar General, B&Q and so on.
We are ISO9001,IATF16949, Reach and ROHS ,FDA approvals.
Floating Fender
Floating Fender has been used for almost 50 years, it's also called marine rubber fender or YOKOHAMA fenders. It is the leading anticollision device for marine application in the world. Floating Fender is used as a protective medium for ship to ship contact, ship to quay,and ship-to-berthing. Floating fenders are a type of marine equipments that are used to prevent boats, ships and other naval vessels from colliding against each other or against docks, wharves and piers. In other words ship fenders can be simply termed as a marine bumper.
LCT use shipside marine balloon fender for STS
Why Choose Florescence
Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in Shandong Province has been established for over 20 years. FLORESCENCE Floating Rubber Fenders are sent to lots of countries, including Indonesia, Singapore, America, Russia, etc. Products are certificated by CCS, ISO, ABS, BV, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements.
Our floating fender business has recently opened the door to the Floating LNG market, one of the most challenging applications in the offshore industry. Several 3.3*6.5m size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation. Florescence is currently in the process of developing larger size fender and advanced monitoring system to better serve our customer needs.
Foam Filled fenders are manufactured from high quality foam covered by a tough Polyurethane skin. Florescence manufactures Foam Filled Fender as an alternative to the standard Pneumatic Fender. The performance of foam filled fenders can be modified by changing the grades of foam. This also gives more flexibility to foam filled fenders in meeting different requirements of berthing energy and reaction force as compared to same size of fenders. Foam filled fenders can also be equipped with a chain and tire net for rough applications.
Since there is no air pressure inside the fender, there is no risk of deflating, bursting or sinking. As there are no end fittings like safety valves, ball valves etc., there is less maintenance required for Foam filled fenders compared to Pneumatic fenders. However, foam filled fender of higher size above 2.2 Meter diameter are generally more expensive when compared to Pneumatic fenders due to the high freight cost.
3189 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
