Dredge Hose

Dredging projects can be divided into several types, including capital construction dredging project for port and shipping lane construction, maintenance dredging to the operated port and shipping lane to guarantee enough navigation dimensions, environmental dredging for the silt cleaning of river, lake and sea, dredger filling projects to strength the coast protection or land reclamation. So silt dredge hose is need in these projects, which is mainly used for the suction and discharge of silt. Silt dredge hoses, also called slurry dredge hose, are usually installed on the two sides of the dredge pump to suck and discharge silt. They are easy to install and remove due to the unique construction of flanges on the each end of hose. Silt dredge hose is very flexible and stable, and it can reduce the vibration caused by storm and water movement. It is highly resistant to abrasion and aging. Silt dredge hose consists of tube, reinforcement and cover. The tube is made from the mixture of natural rubber and synthetic rubber, mainly EPDM, making the silt dredge hose resistant to abrasion, corrosion and aging. Reinforcement of silt dredge hose is made from multiple synthetic fabrics with spring helix steel w ire, making the hose have very high tensile strength and have the ability of absorbing shock and vibration. The cover is made from SBR, which makes silt dredge hose resistant to cut, abrasion, corrosion, weather, ozone, sunlight and aging. Many silt dredge hoses are on the ground Silt dredge hose. A silt dredge hose with black flanges. Silt dredge hose with black flanges. Details of silt dredge hose: Structure: silt dredge hose is composed of three parts: tube, reinforcement and cover. Tube is made from the mixture of high quality EPDM and natural rubber, making the silt dredge hose resistant to abrasion and corrosion. Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening. Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance. Temperature range: -20 ¡ãC to +40 ¡ãC. Inner diameter: 6" - 50" (152 mm - 1300 mm). Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm). Working pressure: 0.5 MPa - 1.2 MPa. Burst pressure: 1 MPa - 2.4 MPa. The specification of silt dredge hose Hose code ID OD Working pressure Burst pressure Length inch mm inch mm MPa bar MPa bar m SFH-01 6 152 7-1/4 182 1.2 12 2.4 24 20 SFH-02 8 203 9-1/5 233 1.2 12 2.4 24 20 SFH-03 10 254 11-1/5 284 1 10 2 20 10 SFH-04 12 304 13-2/5 340 1 10 2 20 6 - 10 SFH-05 14 350 15-2/5 390 1 10 2 20 6 - 10 SFH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10 SFH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10 SFH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10 SFH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10 SFH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10 SFH-11 40 1000 41-1/2 1050 0.5 5 1 10 6 SFH-12 48 1200 49-1/5 1250 0.5 5 1 10 6 SFH-13 52 1300 53-1/5 1350 0.5 5 1 10 6

Dredge hose can be used to handle many types of media such as slurry, silt and sand for its excellent abrasion resistance. And it is also used to handle seawater. This is seawater dredge hose. It is mainly used for the suction and discharge of seawater. Our seawater dredge hose is composed of three parts: tube, reinforcement and cover. The tube is made from the blend of EPDM and natural rubber, which makes the seawater dredge hose highly resistant to abrasion, corrosion, aging and weather. So it can transport the corrosive medium - seawater. The reinforcement is made from spring helix steel wire with multiple synthetic textile, making the seawater dredge hose resistant to kink. And the reinforcement provides full vibration dampening. The cover is made from super high quality neoprene, which makes the seawater dredge hose resistant to corrosive salt water, cut, abrasion, weather, ozone and aging. Our seawater dredge hose is designed specially to handle seawater, so our engineers choose appropriate materials for the hose. Therefore, it can be competent the job well. Besides, the diameter, length and tube thickness of our seawater dredge hose can be customized according to your requirements. A seawater dredge hose with red flanges. Seawater dredge hose. Many seawater dredge hoses are on the ground. Seawater dredge hose cross section. Details of seawater dredge hose: Structure: seawater dredge hose is composed of three parts: tube, reinforcement and cover. Tube is made from the mixture of high quality EPDM and natural rubber, making the seawater dredge hose resistant to abrasion and corrosion. Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening. Cover is made from high quality neoprene for seawater, ozone and sunlight resistance. Temperature range: -20 ¡ãC to +40 ¡ãC. Inner diameter: 6" - 50" (152 mm - 1300 mm). Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm). Working pressure: 0.5 MPa - 1.2 MPa. Burst pressure: 1 MPa - 2.4 MPa. The specification of seawater dredge hose Hose code ID OD Working pressure Burst pressure Length inch mm inch mm MPa bar MPa bar m SWDH-01 6 152 7-1/4 182 1.2 12 2.4 24 20 SWDH-02 8 203 9-1/5 233 1.2 12 2.4 24 20 SWDH-03 10 254 11-1/5 284 1 10 2 20 10 SWDH-04 12 304 13-2/5 340 1 10 2 20 6 - 10 SWDH-05 14 350 15-2/5 390 1 10 2 20 6 - 10 SWDH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10 SWDH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10 SWDH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10 SWDH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10 SWDH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10 SWDH-11 40 1000 41-1/2 1050 0.5 5 1 10 6 SWDH-12 48 1200 49-1/5 1250 0.5 5 1 10 6 SWDH-13 52 1300 53-1/5 1350 0.5 5 1 10 6

1, Product Information: Floating discharging hose is becoming more and more popular with the recognition of the clients. It??s used for conveyance during dredging work with some improved functions. The suitable working temperature is from -20°C to 50 °C. Bending angle is from 0° to 45 ° 2, Product Features: Improved bending characteristics Depending on application a lifetime improvement of x 25 compared to the classic rubber lined floating hose Embedded white iron cast rings Liner in the fittings Applicable for offshore (rock) cutter jobs Virtually no maintenance These features make the following applications possible: mainline discharge applications with abrasive solids Rock cutter discharge line Bow connection discharge line 3, Product Material: Tube: Smooth NR/ synthetic rubber, generally color is black Reinforcement: one or multi-layer spiral fabric reinforcements, steel wire spiral layer Cover: Oil, abrasion and weather-resistant wrapped synthetic rubber

Supplier: Marine fenders, dredging hoses, ropes
Services: Shipping
Buyer: Rubber, nylon rope, polyester rope, polyethylene rope, polypropylene rope, uhmwpe rope, double braided rope mooring tail tow rope, steel wire rope

1.SUPER CELL RUBBER FENDERSSuper Cell Fender is improved over the ordinary type. It is the most commonly used fender in the world.Cell fenders are best employed for small or large vessels where Reaction Force is an important criteria.

3.SUPER CELL RUBBER FENDERSCan support large panels and can be used for large docks.Low reaction force and favorable energy absorption ability.Can be moulded(costs count on customers).

1.SUPER CELL RUBBER FENDERSSuper Cell Fender has high absorption energy per unit weight. Also among all types of compressed fenders, it has the lowestcompression performance change.

SUPER CELL RUBBER FENDERSHigh force absorption and long usage life.Super cell fenders are high technical products developed to substitute common cell fenders.

SUPER CELL RUBBER FENDERSMore reasonable structure.High E/R.H value.Suitable for large wharf.Super Cell Fender is improved over the ordinary type. It is the most commonly used fender in the world. The circular mounting base of the super cell fender makes it an extremely stable fender type.