All products will be made according to API and related international standard as per customers' requirements. Casing quick-operating thread protector is one kind of manual device for protecting casing outside thread. The structure is simple, solid durable, reliable performance. Adopting for our casing quick-operating thread protectors could save time and cost. Type O.Dmm(inch) Connection Lengthmm(inch) KHS 5 230(9-1/16) BCSG,LCSG 125(4-15/16) KHS 5-1/2 235(9-1/4) BCSG,LCSG 125(4-15/16) KHS 7 275(10-13/16) BCSG,LCSG 125(4-15/16) KHS 9-5/8 335(13-3/16) BCSG,LCSG 145(5-45/64) KHS 10-3/4 362(14-1/4) BCSG,?CSG 115(4-9/16) KHS 13-3/8 425(16-47/64) BCSG,?CSG 115(4-9/16) KHS 16 500(19-11/16) BCSG,CSG 125(4-15/16) KHS 18-5/8 565(22-1/4) BCSG,CSG 125(4-15/16) KHS 20 610(24) BCSG,?LCSG 145(5-45/64)
Material:nature rubber+EPDM Color:any color is available Thickness:8-15mm Width:1.22m Length:15-30m Warranty:5 years Installation:by adhesive,easy to install Features:Waterproof,UV resistance,aging resistance,eco-friendly,non-toxic,non-pollution...etc. Certificate:IAAF,SGS,CE,ASTM,ISO9001,ISO14001,ISO45001 Application:stadium,sports center,sports court,gym,school playground...ect.
Floating pneumatic rubber fenders have been in use for around 50 years. It is the leading device for marine application in the world. This compressed air filled rubber fender is used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB). Florescence Pneumatic Rubber Fender Construction: Outer rubber: rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces. Inner rubber: liner of a rubber membrane that seals the pressurized air inside the fender. Synthetic-tyre-cord layer for reinforcement: layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender. Bead ring: steel ring which is placed at one end (or both ends) of the fender and holds the end of cord layers Flange opening: steel flange, which is mounted on the fender, to which an air valve or safety valve can be adapted. Florescence Pneumatic Rubber Fender Advantages: 1. High energy absorption and with a low reaction force 2. Light weight, portable and floatable, can be installed and replaced easily 3. Heavy duty and long service life-over 10 years 4. Supplied as sling type (body only) or with chain and tire net for protection of the fender body 5. Sizes from 0.5m diameter Ã? 1.0m length up to 4.5m diameter Ã? 12m length 6. Suitable for locations with large and small tidal differences Classification of floating pneumatic fender: Fender types: 1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s). 2.Sling-type fender: fenders which are designed to be used without a protection net. Initial internal pressure: 1.Pneumatic fender 50 (initial internal pressure 50 KPa) 2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Floating pneumatic rubber fenders have been in use for around 50 years. It is the leading device for marine application in the world. This compressed air filled rubber fender is used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB). Florescence Pneumatic Rubber Fender Construction: Outer rubber: rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces. Inner rubber: liner of a rubber membrane that seals the pressurized air inside the fender. Synthetic-tyre-cord layer for reinforcement: layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender. Bead ring: steel ring which is placed at one end (or both ends) of the fender and holds the end of cord layers Flange opening: steel flange, which is mounted on the fender, to which an air valve or safety valve can be adapted. Florescence Pneumatic Rubber Fender Advantages: 1. High energy absorption and with a low reaction force 2. Light weight, portable and floatable, can be installed and replaced easily 3. Heavy duty and long service life-over 10 years 4. Supplied as sling type (body only) or with chain and tire net for protection of the fender body 5. Sizes from 0.5m diameter Ã? 1.0m length up to 4.5m diameter Ã? 12m length 6. Suitable for locations with large and small tidal differences Classification of floating pneumatic fender: Fender types: 1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s). 2.Sling-type fender: fenders which are designed to be used without a protection net. Initial internal pressure: 1.Pneumatic fender 50 (initial internal pressure 50 KPa) 2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Non-toxic, odorless, two-component liquid silicone rubber, are two-component materials.Resistance high temperature of 250, shrinkage rate lower than 0.1%.
Applications of liquid pad printing silicone rubber Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface. Features of liquid pad printing silicone rubber a. resistance to deformation, high-temperature b. high printing times c. good aging resistance d. exceptional elasticity e. great printing effect
Rubber Stocks
Since 2018 year, we are completely carried out the whole production line from mold, Refining ,trimming, Assembly with the most professional rubber vulcanizing equipment, the innovative R&D sprite, strong production capacity, strict quality control that make us well to produce the material of NR,NBR, EPDM,SIR,LSR,CR,,SBR,FKM,PU,PP,PVC,PE,PC,ABS etc, Now the capacity more than 20000000pcs/day to ensure the lead time on time! We are cooperate well with domestic and abroad, such as USA Germany, France, UK, Italy, with famous brand, such as Kohler, Dollar General, B&Q and so on. We are ISO9001,IATF16949, Reach and ROHS ,FDA approvals. All kinds of business cooperation are welcomed,
Floating Fender Floating Fender has been used for almost 50 years, it's also called marine rubber fender or YOKOHAMA fenders. It is the leading anticollision device for marine application in the world. Floating Fender is used as a protective medium for ship to ship contact, ship to quay,and ship-to-berthing. Floating fenders are a type of marine equipments that are used to prevent boats, ships and other naval vessels from colliding against each other or against docks, wharves and piers. In other words ship fenders can be simply termed as a marine bumper. LCT use shipside marine balloon fender for STS Why Choose Florescence Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in Shandong Province has been established for over 20 years. FLORESCENCE Floating Rubber Fenders are sent to lots of countries, including Indonesia, Singapore, America, Russia, etc. Products are certificated by CCS, ISO, ABS, BV, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements. Our floating fender business has recently opened the door to the Floating LNG market, one of the most challenging applications in the offshore industry. Several 3.3*6.5m size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation. Florescence is currently in the process of developing larger size fender and advanced monitoring system to better serve our customer needs.
Foam Filled fenders are manufactured from high quality foam covered by a tough Polyurethane skin. Florescence manufactures Foam Filled Fender as an alternative to the standard Pneumatic Fender. The performance of foam filled fenders can be modified by changing the grades of foam. This also gives more flexibility to foam filled fenders in meeting different requirements of berthing energy and reaction force as compared to same size of fenders. Foam filled fenders can also be equipped with a chain and tire net for rough applications. Since there is no air pressure inside the fender, there is no risk of deflating, bursting or sinking. As there are no end fittings like safety valves, ball valves etc., there is less maintenance required for Foam filled fenders compared to Pneumatic fenders. However, foam filled fender of higher size above 2.2 Meter diameter are generally more expensive when compared to Pneumatic fenders due to the high freight cost.
Floating Fender Floating Fender has been used for almost 50 years, it's also called marine rubber fender or YOKOHAMA fenders. It is the leading anticollision device for marine application in the world. Floating Fender is used as a protective medium for ship to ship contact, ship to quay,and ship-to-berthing. Floating fenders are a type of marine equipments that are used to prevent boats, ships and other naval vessels from colliding against each other or against docks, wharves and piers. In other words ship fenders can be simply termed as a marine bumper. LCT use shipside marine balloon fender for STS Why Choose Florescence Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in Shandong Province has been established for over 20 years. FLORESCENCE Floating Rubber Fenders are sent to lots of countries, including Indonesia, Singapore, America, Russia, etc. Products are certificated by CCS, ISO, ABS, BV, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements. Our floating fender business has recently opened the door to the Floating LNG market, one of the most challenging applications in the offshore industry. Several 3.3*6.5m size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation. Florescence is currently in the process of developing larger size fender and advanced monitoring system to better serve our customer needs.
Material: EPDM or according to your requirement. Hardness: 705 ShA Size: Customized according to your drawing or sample Do you have inquiry of it or similar rubber product? Please contact me directly. We still have many other models, I can send you our more information if it's ok for you. I'm waiting here for your reply.
Material: EPDM, NBR, CR, NR, Silicone Hardness: 30shA 90shA Size: Customized according to your drawing or sample Packing: Plastic bags in carton or according to your requirements Welcome your any inquiry, most professional suggestions help you get more profits. Hope to hear your early reply soonest.
Material: EPDM+PVC, or according to your requirement. Hardness: 70±5 ShA Tooling cost: most of sizes are without tooling cost. Service: usually 50m/roll or as per customers' package.
Material: EPDM, NBR, CR, NR, Silicone Size: Customized according to your drawing or sample Quality: RoSH verified compound; Packing: Plastic bags in carton or according to your requirements
Ship rubber airbag Ship rubber airbag is also known as rubber airbag, ship launching airbag, ship salvage airbag, boat salvage airbags, inflatable airbag, ship lifting bag, air balloon, made by rubber & multi layer of rubber-dipped tire fabric. Airbags are widely used in launching and landing ship/ boat/vessel, lifting and moving heavy objects, caisson floating, marine engineering. Rubber airbags are very popular among shipyard, ship owner, and marine supplies company now. Florescence ship rubber airbag. Florescence has our own factory which manufacture rubber products for almost 20 years, so we are the factory direct seller, we are more professional than other companies. Florescence ship rubber airbags are expoted to many countries, including indonesia, singapore, america, russia, etc. Florescence ship rubber airbags can be manufatured in various sizes and types according to the customers' need. 1. Structure of the florescence marine launching airbag 1. Airbag body The airbagbody is composed by natural rubber and strength fiber material through vulcanization progressing 2. Terminal iron part The terminal iron part is made of cast iron, it is combined closely with the airbag body, one end is for pulling when you move it, and the other end if for charging and discharging the air. 2. Advantages of marine launching airbag 1. Different size airbag stock available, quick delivery 2. Provide repair kit and on site instruction 3. Long time service life can be used many times 4. Wear resistance and anti aging 5. Good raw material and cord fabric 6. Harmless to the enviroment, time&money saving 7. Need no more than air compressors, winches and ropes 8. Using marine airbags are much cheaper and portable than other methods
Pneumatic rubber fender Pneumatic rubber fender has been used for almost 50 years, it's also called marine rubber fender or yokohama fenders. It is the mian anticollision device for marine application among the world. Pneumatic rubber fender is used as a protective medium for ship to ship contact, ship to quay, and ship-to-berthing. Pneumatic rubber fenders are a type of marine equipments that are used to prevent boats, ships and other naval vessels from colliding against each other or against docks, wharves and piers. In other words ship fenders can be simply termed as a marine bumper. Why choose florescence. Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in shandong province has been established for over 20 years. Florescence pneumatiuc rubber fenders are exported to many countries, such as indonesia, singapore, france, india, etc. Products are certificated by ccs, iso, abs, bv, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements.
Products range: automotive hoses, hose assemblies and molded parts with the product scope covers automotive fuel system, automotive power steering system, automotive cooling system and all kinds of rubber molded parts, plastic parts and hardware parts.
Our company can produce motorcycle tires and ATV tiresïwe have specialized in this field for 13years.We have obtained E-MARK certification. We have several models of tyres for your needsïWe have a lot of experience in the tire industry,with good quality and pretty competitive price.Whatever sizes we have.
High Wear Resistant Cast Iron Mill Corrugated Liner
