RTV Silicone anti-mildew sealant is used as general adhesive/sealant indoor and outdoor, suitable for: 1. Kitchens, baseboards, walls and tiles,sinks(washbasin), bathtub, closet combination and cracked places 2. Showers, lavatories, bathtubs and floors 3. Bathroom fixtures, fiberglass spa units 4. Refrigerator and freezer liners (however, not FDA-approved for food-contact application) 5. Sealing, bonding and repairing other construction materials including aluminum,marble and coated glass 6.Automobile sound proof, dust and water insulating. 280 or 300ml/pc,plastic cartridge 24 pcs/case OUTER CARTON MEAS. 31X20X24cm ONE 20'GP CAN CONTAIN 1900 CTNS.
CAS NO: 63148-57-2 Apperance & Property:Colorless transparent liquid Hydrogen Content (%):1.58-1.60 Viscosity (25 C, mm 2/S): 20.00-30.00 Flash Point C: 120 C Volatile Component%: 3.00 Packing & Transportation: 200L per plastic barrel/ iron barrel 1ton IBC stored in a cool,ventilated warehouses.Away from fire and hot sources. Require sealed packing. And the temperature of warehouse should not be more than 30ípC. Prevent from direct sunlight.
NE-5130 NE-5140 NE-5150 NE-5160 NE-5170 NE-5180 Appearance milky-white,light-yellow,light-gray Density g/cm3 1.09í+0.05 1.13í+0.05 1.15í+0.05 1.18í+0.05 1.21í+0.05 1.25í+0.05 Hardness Shore A Points 30í+3 40í+3 50í+3 60í+3 70í+3 80í+3 Tensile Strength MPaí¦ 5.0 6.0 7.0 7.0 6.5 6.0 Elongation at Breakage % í¦ 440 380 320 280 200 150 Tension Set % í_ 8 9 10 10 9 8 Tear Strength kN/m í¦ 15 16 18 18 16 15 First vulcanization condition for test piece: 175íµí-5min Vulcanizator: 80% DMDBH,quantity added 0.65% 20kg/box
Silicone sealant The shundes-280n is a low moudulus silicone sealant which offers outstanding performance accoss a wide variety of glazing and construction application.It has excellent adhesion to glass, brickwork, pleastic and so on. 280ml(25/card)
SEP-9200 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer.It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature.Usually not need a primer before apply. It could adapt to thermal expansion and contraction due to inherent elasticity,It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.It has following characteristics: Good operability: one component, easy to apply. Environmental friendly: no solvent, low VOC, without dirt substrate. Good adhesive for variety materials, such as concrete, cement, stone, glass,etc. Excellent weather resistance Paintable
SEP2910 is a one-component high-performance anti-mold sealant, solvent-free, no free isocyanate, no silicone small molecules and polymers, no pollution of the substrate, low VOC and environmental friendly. It is cured by reaction with moisture in the air, and can be cured at room temperature. No primer required. And it can be used as building decoration gap filing and sealing. It is long-lasting anti-mold. Good operability: one component, easy to apply. Environmental friendly: no solvent, low VOC, without pollution of substrate. ood adhesive for various materials, such as glass, metal, PVC,ABS,PC,PET,PBTetc. Excellent weather resistance Paintable
SEP-1900 is a one component sealant based on silane end-capped polyether, without solvent, free isocyanate, small organic silicon molecule and polymer.It is environmental friendly, low VOC, and would not dirt the substrate, which is curing by absorbing the moisture from air in the room temperature.It performs excellent bonding to variety of construction materials, such as concrete, cement, stone, glass, ABS, PC, etc., therefore it could be widely used in construction and infrastructure areas.It has following characteristics: ï??High transparency, would not turn yellow. ï??Good operability: one component, easy to apply. Environmental friendly: no solvent, low VOC, without dirt the substrate. Excellent adhesive: bond well to variety materials, such as concrete, cement, stone, glass, and other construction materials.
MS2000 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer. It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature. Usually not need a primer before apply. It could adapt to thermal expansion and contraction duo to inherent elasticity, It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.
General Purpose Acetic silicone sealant Product Features Acetic cureing , quickly curing, excellent adhesion Excellent resistance to low and high temperature change Good anti-aging propetry Main Appplication All kinds of glass engineering bonding and sealing. Used for bonding various glass cabinets Storage 12 months under dry codition ,blow 27 Package 260ml/300ml 24 pieces per carton
Silway 714 water repellent is a water-dilutable solution of potassium methyl siliconate designed to impart water repellency to a wide variety of surfaces. Supplied at a concentration of 42 percent in water. Silway 714 water repellent reacts with carbon dioxide in the air to form am insoluble water-resistant treatment within 24 hours. KEY FEATURES: * Reduce water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate. * Colorless and non-yellowing protection preserves the natural appearance of the substrate. * Penetrating and breathable * Low VOC * Nonflammable
Acetic GP Silicone removable Sealant fact cure sealant adhesive for indoor Supply Ability: 1000000 Piece/Pieces per Month high quality windshield structural auto glass silicone sealant Packaging & Delivery Packaging Details For 260ml,24pcs/carton,carton size:295*195*24mm,2080ctns/20ft For 300ml,24pcs/carton,carton size:307*207*250mm,1850ctns/20ft For 590ml,20pcs/carton,carton size:360*250*200mm,1550ctns/20ft Port: Qingdao Port Lead Time : 5-15 days, depends on order details, payment time Colors: Clear, Black, White, Grey, Brown, Bronze , requested by customer 2019 New Arrival Free Samples Mirror Glass Window Car Windshield Rubber adhesive for corian Performance Standard Measured Value Testing Method Test at 50±5% RH and temperature 23±20C: Density (g/cm3) ±0.1 0.97 GB/T 13477 Tack-Free Time (min) 180 12 GB/T 13477 Tack-Free Time (min) 80 1000 GB/T 13477 Tensile Modulus (Mpa) /23 0.4 0.18 GB/T 13477 Slumpability (mm) vertical not change shape not change shape GB/T 13477 Slumpability (mm) horizontal 30 GB/T 13477 Curing Speed (mm/d) 23 As Cured -After 21 days at 50±5% RH and temperature 23±20C: Hardness (Shore A) 20~60 34 GB/T 531 Tensile Strength under Standard Conditions (Mpa) / 0.4 GB/T 13477 Elongation of Rupture (%) / 88 GB/T 13477 Movement Capability (%) 20 20 GB/T 13477 Storage 12 Months Characteristic 1.Single-component compound , de-oxime neutral curing, medium/highly modulus. 2.High tensile strength, good expanding performance, excellent bonding strength. 3.Excellent unprimed adhesion to most common building substrates. 4.After curing form a cold and heat resistance. Non-corrosive. Flexible sealant body. 5.Waterproof, age resistance, ultraviolet and ozone resistance. 6.Good capability with other follow series silicone sealing.With years of export experience along with excellent quality, Main Function 1.Structural glazing and sealing for glass curtain wall. Stone curtain wall (marble granite ) aluminum curtain wall and metal structure engineering. 2.Lighting ceiling sealing, the second sealing for insulation glass, stagger and opposite adhesion between glass and glass. 3.Semi-hidden framed and hidden frame engineering curtain wall sealing. 4.Other architectural and industrial sealing.
Acetic Silicone Sealant is a 100% silicone sealant,It has been specifically formulated for the fabrication of fresh and salt-water aquariums. This high modulus component Silicone Sealant forms strong cohesive bonds to glass without the need of primers.The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
Shandong Factory Supply Neutral Weatherproof Silicone Sealant Product Description Material preparation: For successful bonding, glass must be clean of all dust, dirt and oil. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air. DO NOT clean glass with soap and water solutions. Soap residue can cat as a release agent and result in adhesion failure. Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure. Application: 1. Glass must be properly prepared as described. 2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium. 3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass. Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth. Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7-10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate. Repair application: The SINOLINK Aquarium Silicone Sealant can be used to repair old or damaged aquariums. 1. Remove all of the damaged sealant, clean area to be repaired with a clean cloth and a suirable solvent. Spply sealant as described above and tool. 2. Check repaired aquarium for leaks before adding fish to tank. Fill aquarium with water and let it for several days and check for any signs or leakage. SINOLINK hot sale white structural mp1 silicone sealant gun prices Product Specification
Shandong Factory Supply Silicone Sturctural Sealant Features 1,One component,fireproof silicone sealant,high cohesiveness,low modulus,strong movement ability 2,To be formed a kind of cold and hot resistant,non corrosion elastomer after cured,excellent weatherproof,aging resistant,UV resistant,ozone resistant and high-low temperature resistant,no pollution for environment 3,Good cohesiveness to variety of construction material,also with the functions of watertight and extensibility 4,Excellent compatibility with other silicone sealant. Application Fireproof silicone sealant is fireproof for joint filler for all kinds of construction window & door,window & door glass insulating;waterproof sealing for outside construction installation;the final decoration and sealing for variety of outdoors and indoors finishing. Precautions for Use 1,Cleaning all grease 2,Do not make skin contact with sealant long time when working.Please consult a doctor if getting into the eyes carelessly. 3,Dont suit for structural assemble application or more than 50 of the surface of base material. 4,need secondary sizing when joint width over 2cm or sizing on the foams. 5,Keep the construction places with excellent ventilation fireproof silicone sealant 6,Please keep some pressure during sizing,to ensure the joints in base material to be filled in and compacted,make the sealant can contact with base material completely.During sizing,should keep suitable sizing speed to avoid the speed too fast and produce the bubbles and holes.
Two-component silicone sealant information. Colour:A-white/B-black. Net capacity:A-190L/B-19L. Features: 1.Two-component,adjustable curing speed,fast curing in the deep,suitable for construction in the factory; 2.Neutral curing,non-corrosive to building materials such as metal and coated glass; 3.High modulus,high strengh; 4.Excellent resistance to high and low temperature.It will not become brittle,hardwn or crack at 50 after curing .It will not soften and degrade at +50,and always maintain good strengh and elasticity. 5.Good compatibility with other neutral silicone adhesives.
Material: Silicone/NBR, EPDM,SBR,NR,HNBR, FKM/FPM, polyurethane, PTFE Temperature: "NBR(-40~120°C),FFKM(-20~320°C) Viton(-20~200°C),Silicone (-70~220°C) EPDM(-50~150°C),PU(-40~90°C) Special requirements,pls specified." Feature: Resistance to high pressure, oil, weather, abrasion, solvent, high temperature, abrasion resistant, aging resistant, insulation, acid and alkaline resistant Cerfiticate: ISO 9001:2008 FDA,LFGB,ROSH,RREACH,UL Hardness: 30-90 shores A Color: Any color based on Pantone/RAL, or transparent Size: Any size, Customized and standard Cross Section E shape, D shape, Round, Square, U shape, T shape,P shape, H shape,... Customized available OEM/ODM Available,customized logo available Packing Details: "Standard packing: PP bag + carton" Customized packing as per customers' requirement Shipping "Express/Air: DHL/FedExx/UPS/TNT for small order. " Sea shipping: By sea for large quantity. Application "Available for Medical Equipment,Coffee Machine, Air and Gas Lines, Chemical Lines, Laboratory and research, Semiconductor,Protective Jacking, Water and Fluid Lines,Military,aerospace areas. food and pharmaceutical, Building, Transportation, Marine and Defence,Motor vehicles, Container Door Seals..."
Neutral transparent silicone sealant Product characteristics: 1.One-component, neutral room temperature curing, easy to use, in 4-40 ? temperature range can have good sex and thixotropy. 2.For most building materials have good cohesiveness 3.Excellent weather resistance, anti-aging, resistance to ultraviolet radiation, ozone and high and low temperature resistance, is the ideal weather resistance and sealing materials. Main function 1?all kinds of doors and windows installation gap filling sealing 2?all kinds of interior decoration caulking seal
Acrylic ab glue is a quite common used adhesive, it can stick materials of the same kind and different kinds, including steel, iron, aluminium, titanium, aba, pvc, nylon, polycarbonate, plexiglas, polyurethane, cement, china, wood, etc. It is widely used for making and repairing of automobile motorcycle, machine, channels and containers in chemical industry, carpentry and furnitures, lanterms and signboards, toys and every day articles. Features: (1) two-part, fast cure, quick set in several seconds, about one hour it can get the working strength (2) good operation, and suitable for assembly line operating (3) good bonding strength, can bond a variety of substrates, like metal, ceramics, glass, hardness plastics in electronics, etc.
Clear epoxy ab glue in syringe, cured in 5 minutes under room temperature. Good chemical resistance, rapid development of high bond strength. This waterproof and chemical resistant, clear adhesive is great for craft, household, workshop, industry & etc. ¡§c super strong and gap filling epoxy adhesive for household, workshop, industry and repairs; ¡§c waterproof and chemical resistant; ¡§c bonds most materials, especially: metal, wood, glass, ceramics, rigid plastics and concrete.
Rtv silicone gasket maker can replace rubber gasket, asbestos gasket, cork and paper gasket, it can be use for the seal of cover joint of engine, gear case and casing in automobile, motorcycle and other machinery, to the seal of various parts of machinery, the sie and shape of joint cover require no definition(sealed interval¡¨¹ 6mm). Net85g blister pack
