Shandong Factory Supply Neutral Weatherproof Silicone Sealant Product Description Material preparation: For successful bonding, glass must be clean of all dust, dirt and oil. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air. DO NOT clean glass with soap and water solutions. Soap residue can cat as a release agent and result in adhesion failure. Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure. Application: 1. Glass must be properly prepared as described. 2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium. 3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass. Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth. Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7-10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate. Repair application: The SINOLINK Aquarium Silicone Sealant can be used to repair old or damaged aquariums. 1. Remove all of the damaged sealant, clean area to be repaired with a clean cloth and a suirable solvent.  Spply sealant as described above and tool. 2. Check repaired aquarium for leaks before adding fish to tank. Fill aquarium with water and let it for several days and check for any signs or leakage. SINOLINK hot sale white structural mp1 silicone sealant gun prices Product Specification