Coatings Optical Filter Optical Window Whenever light passes from one medium into another medium with different optical properties, most notably refractive index, part of the light is reflected and part of the light is transmitted. The intensity ratio of the reflected and refracted components is a function mainly of the difference in refractive index among the materials, the polarization of the incident light and the angle incidence. Whenever light passes from one medium into another medium with different optical properties, most notably refractive index, part of the light is reflected and part of the light is transmitted. The intensity ratio of the reflected and refracted components is a function mainly of the difference in refractive index among the materials, the polarization of the incident light and the angle incidence. As light passes through an uncoated glass substrate, approximately 4% will be reflected at each surface, this result in a total transmission of only 92% of the incident light. Coating each component will increase the throughput of the system and reduce hazards caused by reflections traveling backwards through the system (ghost images). Optical coatings are often used to alter the reflectance, transmittance, absorbance, or polarization properties of optical components. The components being coated are usually called the substrates. The coating layer is deposited in high vacuum using the process of evaporation by either e-beam, or IAD(Ion Assisted Deposition). Coating materials include metal such as Au, Ai, Ag, Cr, etc. And semiconductors such as Si, Ge.
Differences between Spray Paint and Electrostatic Powder Coating: 1. The effect of Spray Painting is mirror. The effect of Powder Coating is mostly frosted surface with small holes. 2. The paint is thinner than the powder. The paint is about 30 microns in size. The powder particles are about 60 microns. 3.The smell of paint is harmful to health. Small powder pollution, small and environmental impact on workers' health. 4. Paint is volatile matter, so the Curing temperature in the Curing Heating System is below 150 degrees Celsius. The temperature of the Powder Spraying workpiece in Curing Oven needs to be between 180 and 220 degrees Celsius. 5. The same grade of Powder is cheaper than lacquer. 6. The strength of the powder is better than the ordinary paint. 7. Powder Spraying can be in place once. And the powder that falls into the groove in the Spray Room can still be used repeatedly to save cost. Hebei Hanna technology CO., LTD. 's Fast Automatic Powder Color Changing System can change color rapidly for 15 minutes. It saves manpower and time. This is really good for you if you have more color on your workpiece to change. And the Big Cyclone can achieve 99.2% recovery. It's economical and environmentally friendly.
The series of products are made of saturated carboxylpolyester resin, TGIC or HAA, rutile titanium dioxide ,which are the main raw materials.They have good UV resistance and play a good protection and decorative properties for the application of outdoor metal workpiece surface.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Features and Function Can replace varnish and paint and other coatings, directly used for machine maintenance, indoor wood flooring, wooden ceiling, sauna board, wooden balcony handrails, etc. Outdoor wooden floors, flower shelves, wooden houses, pavilions, fences, wooden Bridges, boats, chairs, wooden farm tools, etc.
Castor
Castor Oil Ethoxylates HS Code:34024200 Ethoxyl castor oil + 20 EO, 32 EO, 34 EO, 36 EO, 40 EO, 51 EO, 60 EO 85 CAS NO. :61791-12-6 Molecular formula :C57H104O9 (CH2CH2O) N EINECS no. : 500-147-5 Customs code :34021300 Performance and Use: 1. It is a yellow or brownish yellow liquid or semi-liquid, or a waxy solid. 2. Dissolve in water and a variety of organic solvents. 3. Suitable for all kinds of emulsifiers, especially in the organophosphorus emulsifiers show obvious wetting and synergistic effects.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(�?�°C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
High quality castor oil ( ricinus oil available for shipping all around the world, contact us for more information and details about the product. Aceite de castor de alta calidad ( aceite de ricino ) disponible para envios a alrededor del mundo. Contactanos para mas informacion y detalles sobre el producto.
Classification:Chemical Auxiliary Agent, Chemical Auxiliary Agent CAS No.:8002-33-3 Other Names:Sulfonated Castor Oil MF:C18H32Na2O6S EINECS No.:232-306-7 Purity:40-80%, 40%, 50%, 60%, 70%, 80% Application: 1.In the fiber industry, it is used as fabric oil agent, fiber finishing agent, softener, lubricant, wetting agent, dyeing assistant, etc. 2. It is used as brightener, fatliquoring agent and softener in leather industry. 3. A plasticizer for casein finishing. 4. Used as a lubricant in the metal industry.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(�°C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Commodity Name: Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Reflection Protected Aluminum Ravg 90 0.4 0.7m Enhanced Aluminum Ravg 92 0.45 0.65m, Ravg 90 0.19 0.4m
Resin bond diamond Internal Diamond Grinding Wheel for HVOF coating Description of the Resin bond diamond Internal Diamond Grinding Wheel for HVOF coating: Resin bond diamond internal grinding wheels are mainly used for grinding tungsten carbide coating, ceramic coating, and other materials Various kinds of dimensions and shapes are available, such as flat shapes, cup shapes, dish shapes, etc. Feature/Benefit of the resin bond diamond interal grinding wheel 1. Good free-cutting 2. Good Abrasion Resistance 3. Availability in a broad range of applications in both Dry and Wet Condition 4. Improved Heat Resistance Application of the Resin bond diamond Internal Diamond Grinding Wheel for HVOF coating: 1. Internal grinder, 2. Tungsten carbide grinding, 3. Wet or dry grinding Specification of resin bond diamond internal grinding wheel: Type:Â 11,18, 11W Bond type: Resin, electroplated, metal type Grit: 50 2000 Concentration:100,125 to meet your requirements in every way, we need the following information Shape and Dimension of the wheels Grit size (Mesh, refer to Table 1) Concentration Bond(Resin, Vitrified, Metallic, Electroplated) Quantity
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
