Technical specifications: Outer diameter: 114.3-508mm Standards: API SEPC 5CT, 5B Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125 Connection: STC, LTC, BTC and premium connection Inspection: SGS, BV Certification: ISO 9001:2000 Delivery lead-time: after received deposit 10-60 days according to the quantity Payment terms: T/T, 100% L/C at sight Port of shipment: Shanghai port, Qingdao port Quality control: Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery
Hydraulic coupling during operation requiring regular check oil tank, pump suction filter regularly cleaned. The new machine is running the first 500 hours, when the working machine downtime or hydraulic fluid coupling exports decreased to clean the filter removed regularly check the oil, the timely replacement oil.
Hydraulic coupling during operation requiring regular check oil tank, pump suction filter regularly cleaned. The new machine is running the first 500 hours, when the working machine downtime or hydraulic fluid coupling exports decreased to clean the filter removed regularly check the oil, the timely replacement oil.
*Single axis; *Fabricated topplate and legs; *Double lock protections; *Lightweight design; *For conventional on-road transport; *Work with 2 (50mm) kingpins.
*Single axis; *Fabricated topplate and legs; *Double lock protections; *Lightweight design; *For conventional on-road transport; *Work with 2 (50mm) kingpins.
Electrical:Voltage rating: 125V AC rmsCurrent rating: 1.5AmpContact resistance: 100m Ohms (maximum)Insulation resistance: 1,000M Ohms (minimum) at 500V DCDielectric strength: 750V AC rms, 60Hz and one minute Environment:RCA Keystone Wallplate Insert(Gold plated)Storage temperature: -40 to +85°COperating temperature: 0 to 70°CConform to TIA/EIA 568B category 5eMates with modular plug conforming to UTP Cat.6Mechanical:Housing material: PC UL94V-0Inner material: flame-retardant ABS UL94V-0PCB material: FR-4Thickness: 1.6mmContact material: phosphor bronze stamp and PIN T=0.35mmIDC contact material: phosphor bronze, T=0.50mm with nickel platingWire: 24 to 26AWG
Material: carbon steel, stainless steel, alloy steel or according to customerâ??s requirement Material standard: ANSI, ASME, DIN, JIS, BS, GB or according to customerâ??s drawing Threaded standard: BSPT, NPT, BSP, DIN, ISO or according to customerâ??s requirement Technique: casting, CNC precision turning Size: according to customerâ??s requirement Service: ODM and OEM are available
1, Product Information: Rubber expansion joints are flexible connectors fabricated of nature rubber or synthetic elastomers, steel ring and fabrics, and when necessary, metallic reinforcements provide stress relief in piping systems due to thermal and mechanical vibration and/or movements. ZHW® Rubber Expansion Joints provide relief from stresses caused by thermal expansion and contraction in pipelines. Movement is always experienced in piping systems due to varying ambient temperatures, differences in temperature of materials handled, and differences in composition. Expansion joints absorb this movement and eliminate the danger of buckling or pulling apart with the high replacement costs that would result. 2, Product Advantages: Length of product customization Tough quality and Widely Service Absorption of Vibration, Noise and Shock Wide Range of Flange Materials Available Reduced Turbulence or Material Entrapment Compensation for Misalignment 3, Product Applications: It is extremely suitable for places where there are complex geologic conditions, large sedimentation range and pipes are easy to be damaged due to frequent alternation between heat and coldness in pipes. The elastic slide transfer and deformation of rubber and the heat dispersion of mechanical force may well prevent the physical damages from the displacement of pumps, valves and pipes. As a poor conductor, it is a harmless to reduce the vibration and noise transmission. The product is designed with smooth inner walls, after testing, it is proved to have no any influence on the flow speed and flux of medium, and keeps stainless for ever, accordingly it will be free of maintenance in operation.
Stepper Motor Lead Screw Coupling CNC Flexible Shaft Coupler Features of shaft coupling 1) High concentricity, big torque 2) Aluminum material 3) Reducing the transmission of shock 4) Simple construction, easy to mount and maintenance 5) Suitable for stepper, servo, ballscrew Series commonly used on CNC engraving machine Series D40L55, Series D55L78, Series D65L90
This series hydraulic shaft couplings can be applied to the shipping and machinery industry in many fields.Due to the shaft with a handle couplings,greatly reduces the transmission shaft forging and machining cost. Remove after the cooperate parts while retain the original surface roughness,can be used repeatedly.
The features of this technology: 1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar; 2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding; 3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines; YJ650 stamping equipment 4.No flammable gases, not affected by rainy or cold weather; 5.Relieve congestion of the connecting point, facilitated concrete pouring; 6.No professional and experienced worker needed, able to connect changed steel bar of different diameters; 7.Save 80% of connector steel consumption. The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry." Cold Extrusion Application Principle: 1.Place it well at the working point. 2.Directly use it to press connection point with screwless couplers to link the two rebar.
Introduction Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.Its size can be from 12mm into 40mm different diameter bars. Special Advantages: (1)Each rebar is connected by cold swaged with a coupling, It was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage. (2)Rebar sleeve bond press is done prior to site connection saving precious site time. (3)The two sleeves are connected through a high-strength bolt, quality ensured. (4)Installation on site is easy and fast, even in dense cages. No X-ray check is needed and installation can be done in any weather conditions. (5)No thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice. (6)The Yida ACJ rebar coupling system stands complex or full tension as well as full compression state. Application Guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method Step 1:Screw the bolt into female coupler swaged with rebar, till unable to screw continually. Step 2:Screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. Step 3:With help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time.
Bore dia:3-80mm OD:14-135mm Length:22-185mm Alloable speed: 2500-28000 Material: Aluminum alloy, steel Type: Screw type, clamp type
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axail direction. It is designed to achieve failure loads in excess of 115% of the charateristic strength of grade 500 rebar end. Working principle: 1. Slice up the end of the rebar. 2. Make the rebar taper thread cut by taper thread machine. 3. Connect together two taper thread end by one piece of taper thread coupler.
QUICK COUPLING Material: 304 / 316 / 304L / 316L Casting Process: Investment Casting Size: 1/2”-6” End type: Thread Threads: NPT / BSPT / BSP / DIN2999 / ISO7-1 / ISO228
A&S Construction Machinery Co., Ltd. supplies all types of Hydraulic Couplers. All the brands of Hydraulic Couplers we can provide: CAT Hydraulic Couplers, KOMATSU Hydraulic Couplers, JOHN DEERE Hydraulic Couplers, SANY Hydraulic Couplers, XCMG Hydraulic Couplers, VOLVO Hydraulic Couplers, HITACHI Hydraulic Couplers, SUMITOMO Hydraulic Couplers, LIEBHERR Hydraulic Couplers, DOOSAN Hydraulic Couplers, CASE Hydraulic Couplers, BOBCAT Hydraulic Couplers, KUBOTA Hydraulic Couplers, YANMAR Hydraulic Couplers, HYUNDAI Hydraulic Couplers, DAEWOO Hydraulic Couplers, etc.. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc..
FLAT FACE HYDRAULIC QUICK COUPLINGS (CARBON STEEL)/INTERNATIONAL INTERCANGE ISO 16028 FLAT FACE HYDRAULIC QUICK COUPLINGS(CARBON STEEL)/ INTERNATIONAL INTERCHANGE ISO 16028 Connect by pushing the male coupling Disconnect by pulling back the female sleeve Shut off by flat face valve Connect under pressure not allowed Interchangeability according to ISO 16028 FLAT FACE HYDRAULIC QUICK COUPLINGS(CARBON STEEL)/ INTERNATIONAL INTERCHANGE ISO 16028 Connect by pushing the male coupling Disconnect by pulling back the female sleeve Shut off by flat face valve Connect under pressure not allowed Interchangeability according to ISO 16028 No spillage during connect and disconnect High grade carbon steel tempered or carbonitrited for specific stressed area Polyurethane and NBR backup ring in PTFE 100,000 cycles at 133% of rated pressure disconnected 100,000 cycles at 133% of rated pressure connect test according to ISO 16028 specification
Thread To Connect Under Pressure Couplings (Brass)/ACOPLES Hidraulicos Tuerca De Mariposa Connexion by screwing together the two parts Disconnection by unscrewing the two parts Shut off by flat valve Male and female connectable under pressure disconnection under pressure allowed interchangeability US market Interchangebility according to ISO 7241-2 Technical Specifications High grade carbonsteel with heat trearted wear parts Polyurethane and NBR Backup ring in PTFE -25C to +125C According to ISO 7241-2 Product Categories 1.ISO 7241A KZE ISO 7241 A SERIES HYDRAULIC QUICK COUPLINGS(Steel) KZEB ISO 7241A SERIES HYDRAULIC QUICK COUPLINGS(STEEL BALL) KZESS ISO 7241A SERIES HYDRAULIC QUICK COUPLIGNS(STAINLESS STEEL) 2.ISO 7241 B KZB ISO 7241 B SERIES HYDRAULIC QUICK COUPLINGS (STEEL) KZD ISO 7241 B SERIES HYDRAUIC QUICK COUPLINGS(BRASS) KZBSS ISO 7241 B Series Hydraulic Quick Couplings(stainless Steel) 3.4000SERIES ISO 5675 KPC DOUBLE SHUT-OFF COUPLINGS WITH HARDEND STEEL POPPETS(STEEL)/PIONEER4000SERIES INTERCHANGE 4.PUSH AND PULL TYPE KZA Push And Pull Type Hydraulic Quick Couplings(STEEL) KZAF PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) KZAV PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) 5.ISO 16028 QKPT FLAT Face Hydraulic Quick Couplings(Carbon Steel)/international Interchange ISO 16028 6.QKTF Thread To Connect Nder Pressure Couplings(BRASS)
G1/4-M16X2 Hydraulic Pressure Test Point Testing Coupling Adapter, Hose Fitting Adapter For Hydraulic System Hydraulic Pressure Test Adapter:This series of products are widely used in hydraulic system pressure detection, lubrication, extraction, oil sampling of the pressure system. Hydraulic Pressure Test Adapter: This series of products are widely used in hydraulic system pressure detection, lubrication, extraction, oil sampling of the pressure system. Durable:This test adapter is made of high quality carbon steel, sealed with a good sealant, with long service life.Advanced structure, reliable sealing, no oil leakage. Features: It can withstand high pressure, up to 63MPa, and great temperature resistance: -40 to 120 degree centigrade. Wide Application:This series of products are widely used in automobile, engineering machinery, food machinery, petrochemical industry, medical treatment, mining, ships and other industries. Convenience,Small size, light weight, easy to use.
KZB ISO 7241 B Series Hydraulic Quick Couplings (steel) Features Connexionby pullingback the sleeve Disconnexion by pulling back the female sleeve Shut off by poppet valve Connexion under pressure not allowed Disconnexion under pressure not allowed Interchangebility according to ISO 7241-1 part B Technical Specifications High grade carbonsteel with heat trearted wear parts Polyurethane and NBR Backup ring in PTFE -25�°C to +100�°C According to ISO 7241-2 Product Categories 1.ISO 7241A KZE ISO 7241 A SERIES HYDRAULIC QUICK COUPLINGS(STEEL) KZEB ISO 7241A SERIES HYDRAULIC QUICK COUPLINGS(STEEL BALL) KZESS ISO 7241A SERIES HYDRAULIC QUICK COUPLIGNS(STAINLESS STEEL) 2.ISO 7241 B KZB ISO 7241 B SERIES HYDRAULIC QUICK COUPLINGS (STEEL) KZD ISO 7241 B SERIES HYDRAUIC QUICK COUPLINGS(BRASS) KZBSS ISO 7241 B SERIES HYDRAULIC QUICK COUPLINGS(STANILESS STEEL) 3.4000SERIES ISO 5675 KPC DOUBLE SHUT-OFF COUPLINGS WITH HARDEND STEEL POPPETS(STEEL)/PIONEER4000SERIES INTERCHANGE 4.PUSH AND PULL TYPE KZA PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) KZAF PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) KZAV PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) 5.ISO 16028 QKPT FLAT FACE HYDRAULIC QUICK COUPLINGS(CARBON STEEL)/INTERNATIONAL INTERCHANGE ISO 16028 6.QKTF THREAD TO CONNECT NDER PRESSURE COUPLINGS(BRASS)
